Used Bernardo Gb 35 Hsv for sale (11,244)

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the Gbjdpoxabf Esfx Aqijr sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw Gsdpfxsxabkzs Aqisbr - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, turning length 3000 mm turning diameter 660 mm turning dia. in gap 870 mm turning diameter over slide 420 mm turning speeds 36 - 1600 U/min quill: 5 MK quill travel 150 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 Gbodpfxsxabycs Aqisr weight of the machine ca. 3990 kg. dimensions 4500 x 1280 x 1650 mm Scope of delivery - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 630 mm - Fixed steady rest - passage diameter max. 250 mm - Follow-on steady rest - passage diameter max. 110 mm - 1 centering point / 1 follow-on punch point - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Reducing sleeve - Chip back wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 360 mm turning dia. in gap 480 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 540 kg. range L-W-H 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard Godpfx Aqjxaawaeiobr - Base frame - Operating tools

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve Gedpfjxab Nqsx Aqiobr - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath Gbsdpfxoxaaabj Aqior - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes Gedpexaac Nofx Aqisbr - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 255 mm bore stroke 120 mm morse taper 3 MK turning speeds 105 - 2900 U/min table: 395 x 420 mm column diameter 100 mm threading max. M10 voltage 400 / 50 Hz V Gbodpoxaa Dajfx Aqier weight 140 kg range L-W-H 500 x 570 x 1100 mm Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display Gbsdpfxoxaa Tho Aqisr - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 Gbjdpoxaadysfx Aqior - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: new, sheet width 1020 mm plate thickness 2.5 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 340 kg dimensions of the machine ca. 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks Gbodjxaa E Djpfx Aqisr - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 |200 | 270 mm

Condition: new, sheet width 1270 mm plate thickness 2.0 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 465 kg dimensions of the machine ca. 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam Gjdpfx Ajxabquoqijbr - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270mm

Condition: new, turning length 850 mm turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 centering points Gbsdpexaaxwsfx Aqisr - Chip rear wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1675 kg. Gbodpfexab H Aox Aqijr range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: excellent (used), mileage: 112,871 km, power: 324 kW (440.52 HP), first registration: 01/2011, fuel type: diesel, axle configuration: 10x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, power mirror, soot filter, spoiler, = Further Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) Gbodpfx Asuxp Sleqier - Central lubrication = Further Information = Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Body manufacturer: RSP ESE 40/10-DV-K Technical condition: very good Optical condition: very good MAN TGS 35.440 10X4 TRIDEM RSP SUCTION EXCAVATOR EURO 5 L PACKAGE 440 HP 10X4 TRIDEM DRIVE, LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 450 CM AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR, CAMERA SYSTEM DIFFERENTIAL LOCK MANUAL TRANSMISSION RSP SUCTION EXCAVATOR (TYPE: ESE 40/10-DV-K) 2 TURBINES POWER BOOM CENTRAL LUBRICATION 5X RADIO REMOTE CONTROLS ADDITIONAL HIGH-PRESSURE PUMPS, HOSES, AND GUN ADDITIONAL AIR VALVES AT THE REAR OF THE TRUCK FOR OPERATING AIR TOOLS SUCH AS A HAMMER ADDITIONAL HYDRAULIC CONNECTION AT THE FRONT OF THE TRUCK COMPRESSOR: 4843 HOURS FAN: 2919 HOURS ALL AVAILABLE MANUALS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Bernardo Master 400 x 1000 universal lathe, including 3-axis digital display Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 prism insert (672.00 € net, not included in the price) Distance between centers: 1000 mm Swing over bed: 400 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mounting: DIN 55029, D1-5 Speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Gbedpsgd Iagjfx Aqier Inch threads: (30) 2 - 28 TPI Tailstock diameter: 45 mm Tailstock travel: 100 mm Tailstock mounting: MK 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest - bore diameter max. 90 mm • Traveling steady rest - bore diameter max. 70 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Quadruple steel tool holder • Safety device for quadruple steel tool holder • Slip clutch • Micrometer longitudinal stop • Thread dial • LED machine lamp • Reduction sleeve • Change gears • 2 centers • Foot pedal with braking function according to CE • Motor with magnetic brake according to CE standard / operating tool Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 / Factory installation Price: 672.00 € net, not included in the price )

Year of construction: 2000, condition: used, Punching machine Premium quality Gedsg Dgyxspfx Aqisbr HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: new, *IMMEDIATELY AVAILABLE* Including rear ramp / parabolic suspension / Beavertail rear / spare wheel / bucket holder Technical Data: • Type: New vehicle • TÜV (Technical Inspection): New / 2 years • Availability: IMMEDIATE!! Godpsyyw N Aefx Aqisbr • Permissible total weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall external dimensions: 600 x 234 x 168 cm (L x W x H) • Loading edge height: approx. 29 cm • Tyres: 12 inches • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Body/Construction: • Floor: 18 mm phenolic plywood • Sidewalls: full steel • Sidewall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: no • Hydraulics: - • Ramp angle: approx. 12° • Overrun brake & coupling: KNOTT • Frame/chassis: welded, hot-dip galvanized steel frame • Extension sides: none • Lashing rings: 10 outside, 8 inside • Supports: integrated within the ramp • Ramps: standing ramp on shaft • Lighting connector: 13-pin • Approval: COC documents Standard Equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized by immersion • Very sturdy, bolted V-drawbar, reinforced • Sidewalls 30 cm high • Hot-dip galvanized steel loading ramps, upright • Very robust welded steel frame • Solid walk-on steel mudguards • Complete frame hot-dip galvanized by immersion • Parabolic spring axles (leaf suspension) • Beavertail rear / low loading angle for platforms and excavators • Multiple sturdy cross members for high point load capacity • 10 lashing rings mounted on outer frame (5 pairs), tensile strength 1,000 kg per ring • 8 lashing points mounted inside (4 pairs) • Automatic reverse function • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-size safety lighting • Integrated rear fog light • Rear frame lighting recessed • Rear side position marker lights • Centrally positioned automatic jockey wheel • Registration documents: COC papers Special Equipment Included: • Full-width rear ramp Optional Accessories (on request): • 100 km/h approval • Toolbox • Net hooks • Additional lashing points • Reversing lights • Lashing straps • and much more Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - Vehicle registration document can be sent in advance or transit number plates (Germany) can be provided. - Export number plates with customs clearance also possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been specialized dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, changes and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Including rear ramp / parabolic spring suspension / sloped rear / spare wheel / bucket holder Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATELY!! • Permissible gross weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall external dimensions: 600 x 234 x 168 cm (L x W x H) • Loading edge height: approx. 29 cm • Tyres: 12 inch • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Vehicle documents included Vehicle construction: • Floor: 18 mm phenolic plywood • Side panels: all-steel side panels • Side panel height: 30 cm • Suspension: KNOTT parabolic spring suspension • Tipping function: no • Hydraulic: - • Ramp angle: approx. 12° • Overrun brake & braking system: KNOTT • Frame/chassis: welded fully galvanized steel frame • Extensions: no • Lashing rings: 10 outside, 8 inside • Supports: integrated in ramps • Ramps: standing ramp mounted on shaft • Lighting plug: 13-pin • Registration: COC (Certificate of Conformity) papers Standard Equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized • Reinforced, very sturdy bolted V-drawbar • 30 cm high side panels • Upright, hot-dip galvanized steel ramps • Very robust welded steel frame • Heavy-duty, walkable steel mudguards Gbodpfxoyyw Nvs Aqijr • Complete frame hot-dip galvanized • Parabolic spring axles (leaf spring suspension) • Beaver tail rear / low access for work platforms and excavators • Numerous strong crossbeams for high point load capacity • 10 lashing rings mounted on the outer frame (5 pairs), tensile force 1000 kg per ring • 8 lashing eyes mounted on the inside (4 pairs) • Reversing automatic brake • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Recessed lighting in rear frame • Rear side position lights • Central automatic jockey wheel • Registration documents: COC papers Special equipment included in price: • Full-width rear ramp Optional accessories – available on request: • 100 km/h approval • Storage box • Mesh hooks • Additional lashing points • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been specialist dealers & repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands - Errors, omissions and prior sale excepted -

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Godpfx Aqjxk T Igjiobr

Condition: new, Incl. parabolic suspension / spare wheel / continuous ramp / lockable coupling head / spiral cable Technical Data: • Brand: Ifor Williams • Model: GX126 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: none • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 366 x 184 x 30 cm • External dimensions (LxWxH): 569 x 230 x 163 cm • Loading height: 38 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 882 kg • Payload: 2,618 kg • Chassis: Low loader (wheels beside superstructure) • Tyres: 155/70R12C • Suspension: KNOTT parabolic spring suspension • Jockey wheel: Yes • 100km/h approval: No DESCRIPTION • Reinforced side walls covered with aluminium checker plate, walkable Gedpfx Aqjx S Rkkjisbr • 24mm anti-slip, waterproof phenolic plywood floor • Extremely stable, welded tubular frame • Frame fully hot-dip galvanized • Full-width 120 cm steel mesh ramp with support • Spindle-type ramp locks, extremely robust and rattle-free • Assisted lift for loading flap • Very low chassis for minimal loading angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket rest • 6x lashing rings mounted on the side walls • KNOTT leaf spring axles for extreme heavy-duty use • Automatic reverse • KNOTT overrun brake and parking brake • Lockable coupling head • Highly reinforced bolted V-drawbar • 13-pin connector • Removable wiring harness from the front bulkhead • Reversing lights • Large dimension safety lighting • Integrated rear fog lamp • Lighting recessed into rear frame • Heavy-duty centre jockey wheel Retrofittable accessories – please inquire: Various accessories can be retrofitted to this trailer as shown in the pictures, e.g.: - 4x folding lashing rings (base anchors) mounted in the floor New vehicle with warranty and TÜV. - Financing or leasing possible - Delivery available nationwide - All prices incl. VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export registration incl. customs clearance possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years, we have been an official specialist dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, mistakes, and prior sale excepted -

Condition: new, Incl. parabolic suspension / spare wheel / continuous ramp / lockable coupling head / spiral cable Technical Data: • Brand: Ifor Williams • Model: GX125HD • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without initial registration • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 366 x 157 x 30 cm • External dimensions (LxWxH): 570 x 209 x 163 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 752 kg • Payload: 2,748 kg • Chassis: Low-loader (wheels beside platform) • Tyres: 155/70R12C • Suspension: KNOTT parabolic spring suspension • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Reinforced side panels with tread plate, walkable • 24mm anti-slip and waterproof plywood floor • Extremely stable, welded lattice tube frame • Frame completely hot-dip galvanized by immersion • Full-length 120 cm steel mesh ramp with support • Spindle lock ramp fasteners, extremely robust and rattle-free • Lift assist for tailgate Gjdpfx Aqox S Rkdsiebr • Very low chassis for minimal loading angle • Front excavator bucket support • Spare wheel mounted underneath bucket support • 6x lashing rings mounted in the side wall • KNOTT leaf spring axles for heavy-duty use • Automatic reverse function • KNOTT overrun brake system and parking brake • Lockable coupling head • Heavily reinforced bolted V-drawbar • 13-pin plug • Detachable plug cable at front bulkhead • Reversing lights • Large-dimension safety lighting • Integrated rear fog lamp • Lights recessed in rear frame • Heavy-duty centre jockey wheel Optional accessories – please inquire: Various accessories can be retrofitted to this trailer as shown in the photos, e.g.: - 4x folding lashing rings (deck anchors) in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Registration documents can be sent in advance, or German export/temporary plates can be provided - Export plates incl. customs declaration available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been a specialist dealer and repair workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, omissions, and prior sale -

Condition: new, Incl. parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical data: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: none • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 502 x 209 x 162 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 664 kg • Payload: 2,836 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 155/70R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced side panels, covered with tread plate and walkable • 24 mm anti-slip, waterproof phenolic plywood floor • Extremely robust, fully welded tubular steel frame Gjdsx S Ri Tepfx Aqijbr • Frame fully hot-dip galvanised in immersion bath • 2 individual ramps (skids), standing on shaft, 120 cm high • Ultra-low chassis for minimal loading angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket rest • 6 lashing rings mounted in the sideboard • 4 foldable lashing eyes (plate anchors) mounted in the floor • KNOTT leaf spring axles for maximum heavy-duty use • Automatic reverse mechanism • KNOTT overrun hitch and parking brake • Lockable coupling head • Very robust, bolted, reinforced V-drawbar • 13-pin plug • Removable plug cable from front wall • Reversing light • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in the rear frame • Heavy-duty centre support wheel Optional equipment – available on request: Various accessories can be retrofitted to this trailer as shown in the pictures, e.g.: - 4 foldable lashing eyes (plate anchors) mounted in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be shipped in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, mistakes, and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including continuous ramp 150cm / Low loading platform / Lashing eyes recessed in floor Technical Data: • Make: Martz • Model: BAU-3 350/2 S • Vehicle type: Construction Machinery Trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 350 x 182 x 25 cm • External dimensions (LxWxH): 552 x 241 x 182 cm • Loading height (floor): 34 cm • Gross vehicle weight: 2,700 kg • Unladen weight: 630 kg • Payload: 2,070 kg • Chassis: Low loader (wheels beside platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Continuous phenolic plywood floor, jointless, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp pivoted on shaft • Strong eccentric catches • Stake pockets at all four corners for tarpaulin frames, mesh sides, side wall extensions, or high front wall • Rugged support legs on the loading ramp • Assisted ramp lift • Very low chassis for minimal approach angle • With excavator bucket rest • 8x recessed side lashing rings in frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reversing automatic system • KNOTT overrun coupling and parking brake • Very sturdy reinforced bolted V-drawbar • 13-pin plug • Reversing lamp • Large dimension safety lighting • Lane marker lights at rear • Integrated rear fog lamp • Rear frame lighting recessed • Central automatic jockey wheel Gbedpsx Tixijfx Aqisr Optional accessories – enquire if interested: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing lamp • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or temporary license plates (Germany) can be provided - Export plates incl. customs clearance available All descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been your professional dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Gedpfxsy Rnqfj Aqiebr Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.