Used Bernardo Mrb 1270 X 4 for sale (90,199)

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 1.5 mm - Conical rolling - Removable top roller - Foot control Lhsdpoh Ralqsfx Afpeg - Emergency stop - Documentation - 400V

Condition: new, functionality: fully functional, power: 139.74 kW (189.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, operation weight: 5,500 kg, Equipment: ABS, air conditioning, airbag, all wheel drive, differential lock, From our immediately available stock of new vehicles, we offer you: TSF-W / MLF Mercedes Sprinter 519 All-wheel Drive 4x4 with Single Tires Are you looking for a compact, off-road capable portable pump fire engine / small fire truck with a generous water supply that can be driven with a fire service driving license or a standard driving license up to 7.5 tonnes? Then we have the solution for you! Chassis: • MB Sprinter 519 4x4 Euro 6 with manual transmission • Matching single tires for high off-road capability • Comprehensive standard equipment • Vehicle height only 2.62 m Cabin: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater Body: • High-quality body in frame construction made of rust- and corrosion-free material • Fold-out steps for each lateral equipment compartment • Customised equipment storage made from stainless steel as per your requirements • Walkable, non-slip vehicle roof Vehicle Pump / Extinguishing Agent Tank: • High-pressure extinguishing system with foam proportioning system • Water tank 1,000 l with integrated foam agent tank 100 l Lhedpfx Afexfv R Hspog Firefighting Equipment: • High-pressure rapid intervention hose with 50 m form-stable hose Safety and Lighting • LED lightbar on vehicle roof / 2 LED front flashers • Pneumatic special signal system • 100 W loudspeaker system with public address unit • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED scene lighting on the body and additional spotlights • Pneumatic LED light mast with remote control • Optional: winch • Optional: hygiene board All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller diameter: 110 mm, roller length: 1,270 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor Ljdpfxjyv R Tao Afpehg – Emergency stop – Documentation – 400V

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever Lhjdpfx Afexaafdspjg - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device Lhjdpfx Aoxabkbofpjg - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Lhsdpfx Afsyplqropeg Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: Lhedpfx Asyvzkisfpsg - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 3 mm – Electrically adjustable rear roller – Digital display – Hardened rollers – Conical bending Lhodpfx Ajxiyw Eofpeg – Swiveling upper roller – Brake motor – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for Lhjdpfx Aovpalaofpog bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V Ledpfx Aoxn Rrqofpohg

Condition: new, All Items Boxed in original Packaging. Supplier Catalogue No 5555305P9-SS-A EXPIRY DATE 31st July 2026 Lsdpfx Afsxhdvcepjhg All Items Unused and boxed in there original Packaging - 4 Pieces Sartorius Lab Instruments Sartopure GF+ MidiCaps (0.65 µm, BH9, 4 pcs) are high-quality filter capsules designed for microbial removal and particle filtration in laboratory and industrial applications. Here’s a breakdown of their key features and specifications

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line Lhodjgryl Aepfx Afpog strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm strip width: max. 1.250 mm strip thickness: 0,6 - 4 mm Lhjdpfx Afjrrl Uopjg

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line Lhsdpfx Afsgm E Rdspeg strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line Lodogm E Rlepfx Afpohg strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Ledpfx Aewl Ncfefpehg Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Rack system: Stow Type: Pal Rack NS In the trusses are from the top, bottom & front view each 2 holes with a Ø of approx. 16 mm! These are used for diagonal bracing! Included in delivery are: 01x pallet rack traverse, used Material color: orange U-profile : 150 x 50 x 3,00 mm execution: head traverse agraffe: 4 HK (hooks) clear width: approx. 1.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams Lsdelgzqcopfx Afpshg against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Required scope of delivery for the push-through protection: 01x U-profile, used Material color: cream white Total length: approx. 1,870 mm Profile dimensions: U: 60 x 45 mm Material thickness: approx. 4.00 mm Weight / piece: approx. 9.57 kg including 2 swivel hooks Number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used Material color: sendzimir galvanized Further information: Shelving system: Vogelsang Type: NS Suitable for clear width: approx. 1,800 mm Overhang: approx. 65 mm Two original agraffes are attached to the U-profile. These are used to hook the push-through protection into the upright and fixed with locking bars. fixed in place. The pictures of the installation of the push-through protection are only serve to illustrate the material. The material colors may may differ. General information about the item: This item is only offered for collection. Any additional transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading) Lhsdpfjhh Hu Ujx Afpjg

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Lhedpfx Aswl Ullsfpjg This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm Lsdpewwviiefx Afpehg for frame depth: approx. 1,100 mm clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Unit weight: approx. 2.52 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Mr. Andre Evering Lsdswwuchopfx Afpehg Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: good (used), Technical data for the pallet rack traverse: Lhjdpfxslatxzj Afpsg Rack system: Stow Type: Pal Rack NS Included in delivery are: 01x pallet rack traverse, used Material color: orange box profile: 160 x 50 mm type of cross beam: PNB0446 S235 Execution: head traverse agraffe: 4 HK (hooks) clear width: approx. 1.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is only offered for pickup. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,000 mm Max. load per pair of beams 2,200 kg with evenly distributed load 02x locking pin, used Material color: sendzimir galvanized For securing the longitudinal beams Ledpjt Ibk Rjfx Afpehg against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: No Model year: 2024 Dimensions (L x W x H): 75 x 70 x 70 cm Part suitable for: trucks Ledpfx Afoyi A T Rspohg Price: On request VAT/margin taxation: VAT deductible Type number: 2198091

Condition: used, color: silver, operating hours: 2,032 h, KHC 17R-4X Year: 2019 Operating hours: 2032 Ljdpeyhlnnsfx Afpjhg 3.40 m – 4,715 kg 4.70 m – 3,230 kg 6.00 m – 2,470 kg 7.30 m – 1,960 kg 8.60 m – 1,660 kg = Further information = Model number: KHC 17R-4 / ROLLER CRANE / 4 X H = Company information = ALL PRICES ARE NET EXPORT PRICES, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information, but no rights can be derived from the published text.