Used Binder M 720 Laboratory Dryer for sale (72,255)

Condition: used, empty load weight: 3,800 kg, maximum load weight: 14,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/1999, loading space volume: 31 m³, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, turntable, air-suspended, ABS (anti-lock braking system), U-protection, aluminum side bumpers Body: 2-axle silo trailer for dust and trickle goods with 4x dome cover approx. 31m³ Pressure tank test was renewed in June 2022! Next external inspection in 03/2024! Next internal inspection in 03/2026! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - . Ksdpfx Acjvhkitofslw

Condition: used, axle configuration: 3 axles, first registration: 12/2011, loading space volume: 40 m³, suspension: air, tire size: 385/65R22.5, wheelbase: 1,310 mm, Year of construction: 2011, Tyre size: 385/65R22.5 Suspension: air suspension Kjdpfxoy Rlnnj Acfelw Drive: Wheel Empty weight: 4.720 kg Carrying capacity: 34.280 kg GVW: 39.000 kg Make of bodywork: FELDBINDER Number of compartments: 3

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Kjdpfxjzgc Uuj Acfolw Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: used, maximum load weight: 32,000 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 08/2019, next inspection (TÜV): 07/2026, loading space volume: 38 m³, Year of construction: 2019, Equipment: ABS, Stock no. 5834 Approx. 38 m³ Feldbinder silo semi-trailer with 3 compartments / aluminum rims / 1st owner ----* Manufacturer: Feldbinder * Type: EUT 38.3 * First registration: 08/2019 * Gross vehicle weight: 37,000 kg * Unladen weight according to vehicle registration document: 5,000 kg * Payload: 32,000 kg * Axles: 3 x SAF / disc brakes * Suspension: Air suspension with lifting and lowering function * Tires: 385/65 R 22.5, approx. 50% remaining, on aluminum rims * Color: White * EBS * TÜV (technical inspection): 07/2026 * External inspection: 08/2027 * Internal inspection: 08/2029 * Volume: 38 m³ with 3 compartments (15 m³ / 8 m³ / 15 m³) * Pressure tank 2 bar * Operating temperature from -40 degrees to +80 degrees * 3 domed lids, screw-on * 3 conical hoppers with free-fall valves DN200 * Remote control for free-fall valves on the left * Central discharge to the rear * Control box at the rear * Agitation mats * 3-compartment hose box on the left and right * Grounding on the rear left and right * Access platform with walkway at the rear left, operable from below * Loading pressure gauge * Individual mudguards Kodpfxjy T Dkte Acfelw * Reversing camera * Aluminum support legs (full-load support legs) * Tow hitch * LED reversing lights * LED work lights * Reversing warning system * 1st owner German semi-trailer!! German documents!! Good condition!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information provided. We assume no liability for errors, changes, or sales that may occur in the meantime. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 28,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/1999, loading space volume: 45 m³, total width: 2,550 mm, Year of construction: 1999, Equipment: ABS, 3-axle Feldbinder tipping silo semi-trailer, 45 m³ VIN: 0F07197 Chassis / Components: * Air suspension * Lift axle * Haacon support legs * Jost support legs at the rear * Tires: 385/65 R.22,5 * Remaining tire tread: 1. ~40/10% 2. ~20/50% 3. ~20/10% * 3 x BPW Eco axles with drum brakes * 2 x PVC storage boxes * Aluminum rims * NATO plug Body: * Hyva tipping cylinder, max. 220 bar * Volume: approx. 55 m³ * Loading pressure gauge * 1 x outlet at the rear * 4 x manhole covers * 2 x hose pipes per side Weights: * Gross vehicle weight 34,000 kg * Payload 28,100 kg * Tare weight 5,900 kg Other: * German registration * Valid until 12/2026 New main inspections / safety checks or weight adjustments (reduction/increase) are available upon request. We will gladly assist you in obtaining export / transport license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! Who are we? Kjdpfjzcil Hex Acfelw Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day license plates / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, axle configuration: 3 axles, first registration: 02/2012, loading space volume: 40 m³, suspension: air, tire size: 385/65r22,5, wheelbase: 1,320 mm, Year of construction: 2012, Tyre size: 385/65r22,5 Suspension: air suspension Drive: Wheel Empty weight: 4.720 kg Carrying capacity: 34.280 kg GVW: 39.000 kg Make of bodywork: FELDBINDER Kodpfx Acey Rafnefslw Number of compartments: 1

Condition: used, axle configuration: 3 axles, first registration: 12/2011, loading space volume: 40 m³, suspension: air, tire size: 385/65r22,5, wheelbase: 1,320 mm, Year of construction: 2011, Tyre size: 385/65r22,5 Kledpfx Acey Rafhefsw Suspension: air suspension Drive: Wheel Empty weight: 4.720 kg Carrying capacity: 34.280 kg GVW: 39.000 kg Make of bodywork: FELDBINDER Number of compartments: 1

Condition: used, empty load weight: 8,040 kg, maximum load weight: 24,960 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 04/1994, suspension: air, tire size: 385/65 R22,5, Feldbinder 4-compartment tank semi-trailer TSA 33.3-4 | Total volume 33,000 litres | Compartment 1: 10,500 l | Compartment 2: 6,500 l | Compartment 3: 5,500 l | Compartment 4: 10,500 l | Permitted operating pressure 2.0 BAR | BPW axles with drum brakes | Toolbox, spare wheel holder | Tyres: 385/65 R22.5 | Handbrake with crank | Subject to errors, input mistakes, and prior sale. Klsdpfjyf A Imjx Acfew

Condition: used, axle configuration: 3 axles, first registration: 12/2011, loading space volume: 40 m³, suspension: air, tire size: 385/65R22.5, wheelbase: 1,320 mm, Year of construction: 2011, Tyre size: 385/65R22.5 Kodpfsy Nl Ifsx Acfolw Suspension: air suspension Drive: Wheel Empty weight: 4.720 kg Carrying capacity: 35.280 kg GVW: 40.000 kg Make of bodywork: FELDBINDER Number of compartments: 1

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Ksdpfx Aexv Exbscfelw

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 1999, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Lifting axle - Alloy wheels - Air suspension - Drum brakes = Remarks = Klsdpfx Aoy Igi Iscfow 1999 FELDBINDER food-grade tank semi-trailer, year of manufacture 2000, with a capacity of 33,500 liters / 2 compartments (8,000 l + 25,500 l + movable partition wall), including pump (brand: IBEX PUMPE), ABS/EBS, 3x BPW axles with disc brakes, 1st axle = lift axle, ALCOA rims, unladen weight: 7,200 kg, gross vehicle weight: 34,000 kg, tires 385/65-R22.5 (tread depth left: 7/5/5 mm; tread depth right: 8/7/7 mm) = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 9,000 kg; left tire tread: 45%; right tire tread: 50% Rear axle 2: Alloy wheels; max. axle load: 9,000 kg; left tire tread: 30%; right tire tread: 45% Rear axle 3: Alloy wheels; max. axle load: 9,000 kg; left tire tread: 30%; right tire tread: 45% Weights Unladen weight: 7,200 kg Payload: 26,800 kg Gross vehicle weight: 34,000 kg Functional Body manufacturer: FELDBINDER TSA33.3-3 Number of compartments: 2 Pump: Yes Condition Technical condition: good Visual condition: average Further information Please contact Arne Honingh for further details.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, first registration: 11/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, total height: 3,600 mm, suspension: air, tire size: 385/65-R252.5, Year of construction: 1999, Equipment: ABS, = Additional options and equipment = - BPW axles - EBS (Electronic Braking System) - Lifting axle - Alloy wheels - Air suspension - Drum brakes = Remarks = 11/1999 FELDBINDER food-grade tank semi-trailer with a capacity of 33,500 l, 3 compartments (Compartment 1: 8,000 l / Compartment 2: 22,500 l + 1 partition / Compartment 3: 3,000 l), including pump (Brand: IBEX PUMP), ABS/EBS, 3x BPW axles with drum brakes, 1st axle is a lift axle, ALCOA wheels, unladen weight: 7,200 kg, gross vehicle weight: 34,000 kg, tyres 385/65-R22.5 (tread depth left: 8/14/12 mm; tread depth right: 11/13/13 mm) = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: drum brakes Suspension: air suspension Rear axle: alloy wheels; max. axle load: 9,000 kg; tyre tread left: 12%; tyre tread right: 13% Weights Unladen weight: 7,200 kg Payload: 26,800 kg Gross vehicle weight: 34,000 kg Functionality Kodpoy H Ixhefx Acfjlw Superstructure brand: FELDBINDER TSA33.3-3 Number of compartments: 3 Pump: yes Condition Technical condition: good Visual condition: good For more information Please contact Arne Honingh for further details.

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, first registration: 11/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R252.5, Year of construction: 1999, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = 11/1999 FELDBINDER food-grade tanker trailer with a capacity of 33,500 l, 3 compartments (Compartment 1: 8,000 l / Compartment 2: 22,500 l + 1 partition / Compartment 3: 3,000 l), incl. pump (Brand: IBEX PUMPE), ABS/EBS, 3x BPW axles with drum brakes, 1st axle = lift axle, unladen weight: 7,200 kg, permissible gross weight: 34,000 kg, tyres 385/65-R22.5 (L: 4/6/6 mm; R: 3/3/3 mm) Kledpfjy Dtwwex Acfew = Further Information = Axle configuration Tyre dimensions: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 20% Weights Unladen weight: 7,200 kg Payload: 26,800 kg Gross vehicle weight: 34,000 kg Functionality Body brand: FELDBINDER TSA33.3-3 Number of compartments: 3 Pump: Yes Condition General condition: average Technical condition: average Visual condition: average Further information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, first registration: 02/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R252.5, Year of construction: 1999, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Drum brakes = Notes = 1999 FELDBINDER food-grade tank semi-trailer with a capacity of 33,500 liters, 3 compartments (Compartment 1: 8,000 l / Compartment 2: 22,500 l + 1x partition / Compartment 3: 3,000 l), incl. pump (Brand: IBEX PUMP), ABS/EBS, 3x BPW axles with drum brakes, 1st axle = lift axle, ALCOA rims, unladen weight: 7,320 kg, gross vehicle weight: 34,000 kg, tires 385/65-R22.5 (L: 6/6/4 mm; R: 6/6/6 mm) Kledpfx Asy Dh D Secfjw = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: drum brakes Suspension: air suspension Rear axle: alloy rims; max. axle load: 9,000 kg; tire tread left: 25%; tire tread right: 30% Weights Unladen weight: 7,320 kg Payload: 26,680 kg GVW: 34,000 kg Functional Details Body manufacturer: FELDBINDER TSA33.3-3 Number of compartments: 3 Pump: Yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more details.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Kljdox Nufyjpfx Acfew Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: Kjdpfox Nugdex Acfjlw 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Kjdpfjx Nuftsx Acfelw Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Year of manufacture: 2023 Ksdpfx Aeyg I Dpscfslw Weight: 1,930 kg Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25

Condition: new, Carbide saw blade ø 800 mm Bore ø 30 mm / 90 teeth Kodpfx Asu H T Hvocfjlw

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials. Kedpfszma E Dex Acfjlw

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction. Kljdedzc Rxjpfx Acfew

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side Kodpfx Aob Tmrvecfjlw 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. Kododzc Rfopfx Acfjlw The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Year of construction: 2023, condition: like new (used), Double sided with 6000mm capacity on either side Total of 12000mm total working/ storage capacity for elements 3m height capacity Complete with 2 special fixing arms for one element 4 off additional supports Year - 2023 CE Kedpfx Ajymnh Uecfelw Condition - Never been installed. Condition almost as new

Condition: excellent (used), Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories Klodpfxsznbm Es Acfjw - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.