Used Bruks Disc Chipper Bruks 1500 M for sale (74,551)

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm Bsdpfx Asyhph Esm Telk ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 8427, * Amazone Horse Hopper 1500 Smart Cut * Working width: 1.50 m * 1,500 L collection hopper capacity * Tractor 3-point linkage * H60 wing blades * Support rollers * Mulching device Bederhy H Ropfx Am Tolk * PTO shaft with overrunning clutch * Collection hopper with hydraulic floor emptying * Rotation speed: 2,650 rpm * Fill level indicator -----Internal vehicle number: 8427 WhatsApp support available! If you have any questions about the machine or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp ----Subject to errors and prior sale.

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Control Touch Jones & Shipman between centers max. 100 kg Traverse Z-Axis 1.645 mm traversing speed m/min swivable +5 / -5 ° Traverse X-Axis 260 mm traversing speed - 6 m/min grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Bsdpfotqmrpjx Am Tjlk Swivel range -15 / +90 ° turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 weight of the machine ca. 8,5 t dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction - Two-jaw bezel (range 8-75 mm)

Condition: new, plate width 2000 mm plate depth 1500 mm plate height 310 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 m Blsdsy S Dupopfx Am Tek Clamping plates - T-slot plates - panel array 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 Blsdpfxozphy Ue Am Tok • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Bjdpfx Amerkn Iie Telk Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER Bjdpfx Amsymmqbe Tslk

Condition: used, mileage: 205,003 km, power: 210 kW (285.52 HP), first registration: 03/2023, fuel type: diesel, empty load weight: 7,165 kg, maximum load weight: 8,835 kg, overall weight: 16,000 kg, axle configuration: 4x2, wheelbase: 5,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,100 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, spoiler, tail-lift, traction control, trailer coupling, * German vehicle * 1st owner * Condition as shown in photos * JUNGE box body with tail lift * Tail lift: MBB Palfinger, model C1500 MLPRO * Lifting capacity: 1,500 kg * Foot switch * Roll-off safety device * Box dimensions: length 7,100 mm x width 2,450 mm x height 2,300 mm * Wooden floor * Lashing rails on both sides Bodpfxoy H Iite Am Tslk * Trailer coupling * Permissible trailer load: 21,500 kg * Gross combination weight: 32,000 kg * Air conditioning * Multifunction steering wheel * Cruise control * Steel-air suspension, with raise/lower function * ABS/ASR/ESP * Differential lock * Roof spoiler * Automatic transmission * Fog lights * Rear fog light * Comfort driver's seat, air-suspended * Heated seat * Electric windows * Electrically heated mirrors * Roof hatch * Bluetooth radio * USB / AUX * Wheelbase: 5,200 mm * Gross vehicle weight: 16,000 kg * Unladen weight: 7,165 kg * Payload: 8,835 kg If a new TÜV inspection is requested, we are happy to provide you with an offer from our partner workshops. Our offer does NOT include a new TÜV inspection, new DGUV certification, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer, and strongly recommend, that you inspect and check the goods in person to avoid any misjudgment regarding their condition and suitability. Viewings and inspections are possible anytime by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10 Blsdpfx Asycf Nuem Tek Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants in the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with large surface area and precise micron rating. Optimal Price: We deliver high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Bedpfx Asxnk Acem Telk Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Blsdpfeychbajx Am Tok Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Blodpfxsd I A Aho Am Tsk Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Bljdpod I Az Sjfx Am Tok Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quill Travel 150 mm Quill sleeve Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Control: CNC Drive: Hydraulic Bledpey Hhwqjfx Am Tsk Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: used, maximum load weight: 1,540 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 04/2021, Year of construction: 2021, Equipment: ABS, Manufacturer Tysse Model Nomek Minislamsuger / 1500 L Rustfri tank Trailer Year 2021 Condition Good Serial Number YYB6357D0M0303493 Ref. nr. 8062 Bljdpfxex Nufas Am Tsk Reg. date: 21-04-2021 Wheelbase: 2590 mm Total weight: 2500 Kg Net weight: 960 Kg Load capacity 1540 Kg Manufacturer: Nomek Tank capacity: 1500 L Pump motor: Honda GX390 Gasoline Vacuum pump: JUROP PN33 Vacuum capacity: 3.600 liters/min

Condition: used, Year of construction: 2009, gearing type: other, first registration: 01/2009, color: orange, mileage: 1,001 km, empty load weight: 650 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Salt spreader approx. 1.5m³ The salt spreader ran on a Unimog U20! Body spreader with 4x support legs! Dead weight approx. 650kg! Salt spreader approx. 1.5m³ Capacity liquid salt approx. 645l ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Blodpfst E R Dbsx Am Tsk - .

Condition: used, first registration: 01/2020, color: silver, Year of construction: 2020, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, aluminum loading platform, stationary. Body: 1.5-ton loading platform. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bledpfei Rq T Rex Am Tok

Condition: good (used), Year of construction: 2020, operating hours: 994 h, Drivetrain Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg Lift height: 3.000 cm CE mark: yes Condition Bsdszg Ahhepfx Am Tolk Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 9,35 m / 2,36 m / 2,54 m Additional information Please contact Tobias Mayr for more information

Condition: excellent (used), Year of construction: 2006, Working height: 1500 mm Open-top machine Machine includes all necessary components. Working direction: From left to right Working height (glass support height): 750 mm Width of the machine: 5900 mm Max. height: 2840 mm Depth: 1400 mm Blodpfozc Hr Dox Am Tsk Condition: very good, second-hand

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle power : 26 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 77 [mm] - Max. turning diameter : 420 [mm] - Max. diameter on bench : 750 [mm] - Spindle nose : A2-8 - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 / 1605 [mm] - Y stroke : +/- 75 [mm] - Tool type : VDI 50 - Live tools speed : 25 - 4.000 [rpm] - Live tools power : 7,5 [kW] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Distance between centers : 1.500 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 55,6 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.270 x 2.206 [mm] - Machine height : 2.165 [mm] - Machine weight : 7 800 [kg] MACHINE HOURS - Number of working hours : 35000 [h] Bedpfx Amsuhbnzo Tjlk EQUIPMENT - CNC : Mazatrol 640T NEXUS - Interface : USB / RJ45 / RS232 - Coolant tank : 350 [l] - Chips conveyor - Tool probe - Parts catcher - Predisposition for barfeeder - Rest : SMW SLU-3.1-MS Ø20-165 - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws : KITAGAWA B210

Condition: excellent (used), Year of construction: 2012, Technical data: Blsdpjy U Ni Djfx Am Tjk Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Distance between centers: 1500 mm Revolutions: 25 – 2000 RPM Spindle bore: 75 mm Digital position display: ACU-RITE Motor power: 11 kW CE marking Dimensions (length x width x height): approx. 3100 x 1450 x 1600 mm Weight: approx. 3 tons Accessories: 3 quick-change tool holders 3-jaw chuck 250 mm 4-jaw chuck 400 mm Rapid traverse Various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, x-travel 1500 mm y-travel 800 mm z-travel 700 mm table surface area 1760 x 700 mm spindle taper SK 40 spindle turning speed - stepless 8000 U/min spindle drive 15 kW feeds 1 - 8000 mm/min rapid traverse X/Y/Z axis 15 / 15 / 12 m/min table load max. 2500 kg spindle throat 760 mm ATC 40 Pos control HEIDENHAIN, TNC 530 total power requirement kW weight of the machine ca. 12,5 t dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - Bodpfeux Agvox Am Tslk - the magnetic plates shown on the photo are not included -

Condition: excellent (used), Year of construction: 2004, Technical data: Maximum turning height: 300 mm Maximum turning diameter over bed: 600 mm Maximum diameter over slide: 500 mm Distance between centers: 1500 mm CNC control: FANUC 21i-TB Revolutions: 16 – 4,000 RPM Spindle motor power: 18.5 / 30 kW 3-jaw chuck: 315 mm Bedpoy Ub Ufofx Am Tjlk Tool changer: 12 stations CE marking Dimensions (length x width x height): approx. 6000 x 2300 x 2100 mm Weight: approx. 7.5 tons Accessories: 12-position tool turret Numerous tools Numerous driven tools Hydraulic chuck with additional jaws Tailstock W+W filter system Chip conveyor The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Very nice 2003 BURG 20FT ADR swap chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR certification (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread left: 7/10/15 mm; tread right: 13/6/15 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 95% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 75%; Tire tread right: 50% Weights Bljdpfx Amjy H Dwtj Tsk Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-10-FS Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) Bodszk T Ugspfx Am Telk • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐