Vertical machining center

AWEA BM-1500 II

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 13,450 mm, total width: 4,135 mm, total length: 3,092 mm, load capacity per storage section: 400 kg, input voltage: 400 V, load capacity: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Fodpferu A Atsx Ab Ujpr Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Approximate number of trays: 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid unless the system is sold. Technical specifications per Logimat: - Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg - Maximum tray capacity: approx. 91 trays, 400 kg each, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm - Tray tare weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint approx.: 12.8 m² - Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Integrated LogiTilt - Integrated LogiPointer - Integrated LogiGate - Integrated LogiStainless Machines have been professionally disassembled and can be reassembled by the same technicians if required. Photos and videos of operation and disassembly available on request by email. Price: special export price Price: excl. VAT Delivery time: in stock We have three Schäfer Logimat units available in stock. Machinehandel De Leeuw BV specializes in used paternoster systems by brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2020, operating hours: 1,139 h, functionality: fully functional, turning length: 599 mm, turning diameter: 530 mm, spindle motor power: 11,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 56 mm, travel distance X-axis: 530 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 599 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, Beautiful machine with the possibility of integration with a brand new IEMCA bar loader mod. Master 52, 1,100 h of work life. Fjdpfx Aovv Tvfsb Uopr Multitasking, allows milling and turning operations together. Robust and precise machine with rigid cast iron structure. Double magazine: Revolver turret + Internal magazine with additional 12 CAPTO tools protected in internal magazine + 12 mounted in turret + 6 25 mm square hybrid attachments (see attached technical sheet). Double spindle for resuming processing. Fanuc 0i-TF numerical control + Manual Guide. Tool Overload Detection System (automatic tool overload control system). Complete manuals. Transformer, Chip conveyor, 15 Bar coolant pump. Presetting, Hand piece collector and finished piece exit carpet, Work lamp, ----- Beautiful machine with the possibility of integration with a brand new IEMCA bar loader mod. Master 52, 1,100 h of work life. Multitasking, allows milling and turning operations together. Robust and precise machine with rigid cast iron structure. Double magazine: Revolver turret + Internal magazine with an additional 12 CAPTO tools protected in the internal magazine + 12 mounted in the turret + 6 25 mm square hybrid attachments (see attached technical data sheet). Double spindle for resuming processing. Fanuc 0i-TF numerical control + Manual Guide. Tool Overload Detection System (automatic tool overload control system). Complete manuals. Transformer, Chip conveyor, 15 Bar coolant pump. Presetting, Piece collecting hand and finished piece exit carpet, Work lamp,

Condition: like new (used), Year of construction: 2020, Machine type Machining center - Vertical Manufacturer DMG MORI Type CMX 600 V Year of construction 2020 Control 840D SL Slimline Multi Touch Operate 4.7 Country of origin DE- Delivery time by arrangement Freight basis ex location Technical details x-path 600 mm y-path 560 mm z-path 510 mm Control unit 840D SL Slimline Multi Touch Operate 4.7 Main spindle: Max. Max. speed 12,000 min/-1 Drive power - main spindle 13 / 9 kW Max. Torque 82 / 54 Nm Tool holder SK 40 Distance between spindle nose and table 120 - 630 mm Work table: Table clamping surface 900 x 560 mm Max. table load 600 kg T-slots 5 Working height 850 mm Tool magazine: Number of tool positions 30 pos. SK 40 tool holder max. tool diameter 80 mm max. tool diameter with free neighboring box 130 mm Max. tool length 300 mm Max. tool weight 8.0 kg Tool - tool change time 2.4 sec Changing time chip - chip 6.7 sec Feed rates: Rapid traverse 30 m/min Feed force 5 kN Feed speed max. 30,000 mm/min Total power requirement 32 kVA Machine weight approx. 5.0 t Space requirement approx. 4.0 x 5.0 x 3.0 m Accessories Fodorwi Swspfx Ab Ujpr documentation Chip conveyor Coolant unit High-pressure cooling 12 bar Internal coolant supply electric handwheel Signal lamp - 4 colors Measuring probe PP40 Tool measurement

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Fpodpfxsu Atmuj Ab Usr Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Fsdpfx Abotyyn Hj Ujpr

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Fjdpfjvun Tpox Ab Uepr Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, table width: 2,400 mm, table length: 3,020 mm, overall weight: 20 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 960 mm, spindle nose: ISO 50, tool length: 350 mm, tool diameter: 127 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Fpjdpfx Ajrl Svreb Uor

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 Fpsdpfxjuhb D Ae Ab Uor - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, CNC control Heidenhain TNC620 4th axis (NC dividing head) electronical handwheel 24-fold automatic tool changer coolant through spindle device chip conveyor exhaustion device Technische Daten / technical details: X-Weg / X-travel 1000 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 550 mm Fpodpfxetqd E Ee Ab Uor Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 10000 UpM /rpm Tischaufspannfläche / table clamping area 1000x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 13,5 kW Gewicht ca. / weight 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2015, Technical details: x-travel: 960 mm y-travel: 600 mm z-travel: 480 mm rotary table:: D 350 mm table load: 200 kg spindle turning speed range: 12.000 1/min drive capacity - spindle motor: 14/10 kW control: HEIDENHAIN iTNC 530 rapid traverse: 32 / 32 / 24 m/min Tool changer: 30- fach spindle taper ISO: BT 40 weight of the machine ca.: 7,4 t total power requirement: 45 kVA dimensions of the machine ca.: 3,1 x 2,3 x 3,1 m 5-axis simultaneously universal-machining center, NC-rotary-swivelling table dia. 350mm, A-axis (120/-42°), C-axis 360°, Internal coolant supply, Fpedpfx Absrm Txbo Uor el. handwheel, chipconveyor, direct measuring system, Hour meter: approx. 9.000 h "machine on", approx. 3.500 h "spindle on" *