Used Comexi F2 Mb for sale (3,901)

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control Fjdpfexbcudsx Ahvogf * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm Fgodpfxjxaa Sde Ahvef revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: good (used), mileage: 636,905 km, power: 345 kW (469.07 HP), first registration: 11/2020, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2020, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - EPS (Electronic Power Steering) - Low noise - Particulate filter - Radio/CD player - Rain sensor - Sliding roof - Sleeper cab - Side door - Heated seats - Auxiliary heater - Toolbox - Xenon lighting = Further Information = Axle Configuration Front axle: steered; suspension: leaf spring Rear axle: suspension: air suspension Weights Empty weight: 7,380 kg Payload: 10,620 kg Gross vehicle weight: 18,000 kg Environment Emission standard: Euro 6d Condition Technical condition: good Visual condition: good Warranty Warranty: No liability for printing & typographical errors; subject to change, prior sale, and errors! Identification Reference number: 92 Further Information Please contact Emad Al Shogran for further information. Vehicle number: 92 VOLVO FH 460 / Globetrotter / Euro 6 / Registration MB Model 2021 .: YV2RTY0A1MB322782 Suspension: leaf / air Transmission: automatic Air conditioning Engine brake Cruise control Refrigerator box Fjdpfsyut Ebox Ahvjgf Auxiliary heater Distance control assistant Lane departure warning system Xenon lighting Navigation system Emission standard EURO 6 = Company Information = No liability for printing & typographical errors; subject to change, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: used, first registration: 06/1975, axle configuration: 4x4, color: red, gearing type: mechanical, Year of construction: 1975, Unladen weight: 4,000 kg Fgodeuu T S Hepfx Ahvof Maximum speed: 25 km/h Interior: black Number of keys: 1 Manufacturer: Mercedes-Benz Provincialeweg 5334 J VELDDRIEL, NL

Condition: ready for operation (used), Type: FEELER QM-40S Fanuc 18i-MB control Renishaw tool setter X-axis travel: 1000 mm Y-axis travel: 520 mm Z-axis travel: 505 mm Table size: 520 × 1150 mm Max. table load: 500 kg Spindle taper: ISO 40 (7/24 taper No.40) Spindle speed: up to 10,000 rpm Main power: 15 / 18.5 kW Tool changer: 24 positions (random ATC) Max. tool weight: 8 kg Max. tool length: 300 mm Max. tool diameter: Ø80 mm (Ø150 mm without adjacent tools) Rapid traverse: X: 48 m/min Y: 48 m/min Z: 30 m/min Cooling: internal cooling (high-pressure spindle cooling) external cooling chip flushing Required air pressure: 6–8 bar Fgjdpsyi H R Tsfx Ahvef Power supply: 20 kVA Spindle oil cooled Machine weight: approx. 6,300 kg Machine dimensions: 2,800 × 2,185 mm Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses)

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, torque: 163 Nm, coolant supply: 20 bar, nominal power (apparent): 30 kVA, number of spindles: 48, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, table load: 400 kg, tool diameter: 70 mm, tool length: 300 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Fgsdpfx Asuw Sq Uehvsf Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: good (used), Year of construction: 2017, Manufacturer: DENIOS Model: PolySafe Euroline F2-200 Year of manufacture: 2017 Load capacity: 760 kg Load capacity with shelving arrangement: 620 kg Collection volume: 220 l Fgjdpfx Ahsyx Sl Aovsf Total collection volume: 240 l Material: PE-HD Approval: Z-40.22-538 Quantity: 4 units

Condition: new, * IMMEDIATE AVAILABILITY * Including drive-on ramp / mesh extension / lashing rings Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 450 kg • Payload: approx. 1,550 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall exterior dimensions: 395 x 192 x 152 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13” steel wheels • Brake: yes • Jockey wheel: yes • 100 km/h approval: for additional charge • Including vehicle documents Superstructure: • Floor: Wood, 15 mm phenolic plywood • Sidewalls: Steel • Sidewall height: 39 cm • Chassis: Low-loader, rubber torsion axle • Folding sidewalls: Large drive-on ramp at the rear • Hydraulic system: no • Overrun device & brakes: Knott • Frame/chassis: V-drawbar • Extension: Mesh extension included in price • Locks: Over-centre latch • Lashing eyes: 6 recessed in floor • Supports: available at extra cost • Electrical connector: 13-pin • Registration: ZBII & CoC documents Standard equipment: • Galvanised steel side panels • Rear sidewall foldable • Wooden floor • Corner stanchions with insertion options for extensions or mesh • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal recessed lashing rings in the floor • Rear access ramp • Over-centre latch • Removable mesh extension • Tarpaulin buttons for cargo net or flat cover • Overrun brake by Knott • Automatic reversing system • Sturdy V-drawbar • 13-pin connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • Rear frame integrated lighting • Registration documents: Vehicle registration certificate (ZBII) & CoC documents Optional accessories - inquire for details: • Perforated railing on sidewall • High front mesh • High cover • Sideboard extension • Spare wheel • Storage box • Rear support legs • Ramps • Flat cover • Additional lashing eyes • Slotted-hole rails for lashing straps & load bars • Rubber-coated lath strips for lashing straps & load bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available Fedpfxsyyw Rys Ahvegf - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are copyright protected! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes and prior sale excepted -

Condition: used, For sale is a HEIDENHAIN operator panel MB 420 with ID 293 757-45 in like-new condition. The operator panel is fully functional and has been tested prior to sale. Details: Manufacturer: Heidenhain Type: Operator Panel Model: MB 420 ID: 293 757-45 Condition: Like new Function: Fully functional, tested Warranty: 7 days functional warranty The item will be carefully packaged. Ideal as a replacement operator panel or for immediate use in existing machines and control systems. Fedpfeylcw Iox Ahvsgf Please feel free to contact me if you have any questions or are interested.

Condition: good (used), Manitowoc Multiplex MB-8-1PP slush machine ice cream machine Manitowoc Multiplex MB-8-1 workstation for mixing in a cup. Features: Mix and serve directly in the cup. Improve consistency, control product cost, reduce waste, labor and serving time. Automated features to complete the entire beverage preparation process - right in the cup! Integrated nugget ice machine The integrated nugget ice maker is the perfect ice for all types of specialty drinks and provides high beverage capacity during peak hours. The ice maker meets a large ice demand within 24 hours. Built-in refrigeration for storage and dispensing system. Fodpfx Ahopgwh Ajvegf Exclusive easyToUCH™ control system. User-friendly, icon-based touchscreen control simplifies beverage preparation and inventory management. The control panel provides visual training, cleaning, maintenance and data collection information. With the icon-based easyToUCH™ touchscreen, preparing a beverage is as easy as pressing a button. This intuitive control panel lets you do everything you need to operate the machine - from beverage preparation to training to cleaning. Menu language Dutch Without product holder/drawer Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, machine/vehicle number: 1980 100 175, Maximum volumetric flow rate: 220 m³/h Fjdpfx Asb Nv S Sohvsgf Maximum pressure: 22000 Pa Electrical connection: 230 V Weight: 16.5 kg Space requirement: 720 x 320 x 410 mm

Condition: used, mileage: 17,255 km, power: 335 kW (455.47 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #365 MB ACTROS 2546 6x2/ Kroll ADR Suction Vehicle, K 1.0 - 13.5 / 36 PESP Body KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5/36 PESP * 14,500 liter tank capacity (air volume) * 10,000 liter sludge volume | 3,500 liter emulsion chamber * 1,000 liter rinse water volume (non-pressurized) * Discharge with sliding piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on driver’s cab * Reversing camera * Navigation system * Air conditioning * Coolbox Vacuum system CVS VacuStar W1300, approx. 1,200 m³/h at 400 mBar * Suction hose cassette with telescopic boom and 20m DN100 High-pressure system Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60m DN 13 * Approx. 60m rinse hose DN 13 Special features ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Remote-controlled suction connection pre-piston chamber DN100 Fsdpfx Asxa T Ryehvjgf * Manhole DN500 on left side * HP lance * Noise protection cladding for the pumps left and right * LED environment lighting * Remote control with two batteries * Tiltable debris container * Reversing camera * Ladder with bracket and anchor points * Advertising board on left and right of tank Technical Data GVW 26,000 KG * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Optional Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, Equipment package: ADR, Right exterior mirror with shunting position, 220 Ah battery, brake connections standard and DuoMatic, interactive multimedia cockpit, electrical preparation in cab 24V / 100 A, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3-leaf, front windshield tinted with band filter, hazardous goods version ADR type FL, 12-speed transmission - Type: G 211-12, 3-piece fender, 3-piece fender with splash guard, fuel tank: 510 L aluminum, left, cool box/cooler, 2-cylinder air compressor, reinforced engine brake, steered trailing axle 9 t, liftable, double PTO MB 123-11b/1c, programmable special module, wheelbase variant 4300 mm, frame overhang 1650 mm, rain sensor, acoustic reversing alarm and warning beacon (external warning signal), additional remote control key (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver’s seat velour, cab seats: both-sided armrests passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver's seat, exterior sun visor, steel rims 11.75x22.5 (on front axle), socket 24V / 25A in passenger footwell, additional socket 24V in passenger footwell, steep shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 environment cameras (display on vehicle monitor), preparation for additional headlights, seat belt warning device passenger, seat belt warning devices, transmission oil cooler For further details and/or pictures, please contact us directly. You will find a large selection of other vehicles for BUYING or RENTING at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively...

Condition: used, Year of construction: 1982, Equipment: cabin, MB-Trac 800 Central gear shift Fodexrivpopfx Ahvsgf Hydraulics Forestry equipment was only installed after refurbishment. The vehicle has never worked in the forest!

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, total height: 2,864 mm, overall weight: 11,500 kg, spindle speed (max.): 15,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50–810 mm • Spindle nose to pallet center: 135–895 mm • Table/pallet: 500 × 500 mm; max load 500 kg; indexing 1° • Workpiece capacity: max Ø800 × 1,000 mm • cutting feed 1–60,000 mm/min; table indexing motor 3.0 kW • Tooling: tool shank MAS403/BT40; pull stud MAS 2; magazine 64 tools; random selection • floor space 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Provision for Renishaw probe • Shower/washdown system Fsdsx D Rrcepfx Ahvsgf

Condition: excellent (used), Year of construction: 2010, COMEVA MB 500 Planer/Jointer Working width: 510mm 4-knife cutterhead Fjdoiwa Spjpfx Ahvjgf Traditional knives Length of work tables: 2630mm Adjustable fence, tiltable at 45° Motor power: 4kW Smoothing combs CE certified

Condition: used, Year of construction: 1998, Used Filling Monoblock Cerma 1998 The Cerma 46-MB filling monoblock is a highly efficient and reliable equipment that was manufactured in 1998. It is currently in storage, but is ready to be put back into action at any time. This monoblock is specifically designed for filling glass and PET containers with vinegar, and it uses a volumetric fill type and fixed nozzle to ensure accurate and consistent results. The monoblock is equipped with 23 valves, which help to ensure that the filling process is fast and efficient. It also has 4 capping heads for aluminum screw caps, which helps to seal the containers securely and prevent any spills or leaks. The rotation direction of the monoblock is counterclockwise. This helps to ensure smooth and seamless operation. In terms of safety, the Cerma 46-MB filling monoblock has all the necessary features to ensure the safety of operators and the integrity of the product. Manuals are also available for reference, so users can easily understand how to operate the equipment and perform any necessary maintenance. Fodpfxovgupno Ahvjgf Overall, the Cerma 46-MB filling monoblock is a high-quality and reliable piece of equipment that is perfect for any business looking to fill large quantities of vinegar into containers. With its efficient filling and capping capabilities, it is sure to be a valuable asset to any production line. It weighs a total of 4200 kg, so it is a sturdy and durable piece of equipment that is built to last.

Year of construction: 2006, condition: ready for operation (used), CME horizontal milling machine Type MB 3000 FLEX Rotary table size 1.400 x1.400 mm Max. table load 12T Longitudinal travel (X) 3.000 mm Vertical travel (Y) 2.000 mm Cross travel (Z) 1.000 mm Drill travel (W) 700 mm Rotary table (B) 360 - 0,001 degree Boring spindle dia. 150 mm Spindle speed 50-2200 rpm Spindle taper 50 ISO Spindle motor power 30 kw Ram size 580-430 mm CNC Controller Heidenhain iTNC530 Accessories: Cooling through spindle 60 bar ATC 60 pots Hours: Spindle 27.048 hours Machine dimensions: Height 4.856 mm Length 6.663 mm Width 10.000 mm Fgodpogui Txjfx Ahvsf Weight 70 T Build year 2006

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Fodpfx Ahsdzqa Hjvogf Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: used, mileage: 73,400 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro4, loading space width: 2,150 mm, number of seats: 3, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), Jotha tipper body, telescopic and designed as a demountable system, year of manufacture 2012. CombiCon 4015 U transforms your Unimog U 20 into a multifunctional, all-season vehicle. As a quick-change system, the body can be mounted or removed in a short time. With a lifting capacity of 4,000 kg, you can utilize the full payload range of your Unimog. The width between the lifting arms is over 1,700 mm. Suitable for containers with capacities of 2.5 m³ or 3.5 m³. PTO drive with front-mounted PTO. Trailer coupling. Trailer brake system. Towing capacity of 18t with turntable trailer. Central axle trailer towing capacity up to 13 t with a support load of 1,000 kg possible. Front mounting plate, size 3. Differential locks. Disc brakes. All-round warning beacons. Coil springs. Split-range gearbox with work group. Dual-circuit hydraulic system. Electric windows and mirrors. Radio and hands-free telephone kit. Reversing camera. Telligent shifting system. Double passenger seat. Air-suspended driver's seat. Maximum container length: 2,400 mm. Maximum container width: 1,700 mm. Maximum lifting capacity: 4,500 kg. And much more. Errors, changes, and prior sale reserved. Fsdpfey Svd Asx Ahvegf

Condition: used, mileage: 73,400 km, power: 110 kW (149.56 HP), first registration: 06/2009, overall weight: 8,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro4, loading space width: 2,050 mm, loading space length: 2,200 mm, loading space height: 400 mm, number of seats: 3, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), Jotha tipping body swap system, telescopic, year of manufacture 2012 CombiCon 4015 U converts your Unimog U 20 into a multifunctional, all-season vehicle. As a quick-change system, the body can be mounted or removed in a short time. With a lifting capacity of 4,000 kg, you can utilize the full payload range of your Unimog. Width between lifting arms is over 1,700 mm. Fedpfxsy Svdpo Ahvogf Suitable for containers of 2.5 or 3.5 m³. PTO drive with front-mounted PTO shaft Trailer coupling Trailer brake system Permissible trailer load of 18 t with turntable trailer Permissible trailer load with central axle trailer: 13 t with 1,000 kg drawbar load possible Front mounting plate, size 3 Differential locks Disc brakes Rotating beacon lights Coil springs Split gearbox with working group Dual-circuit hydraulics Electric windows and mirrors Radio and hands-free telephone system Reversing camera Telligent transmission Passenger seat for two occupants Air-suspended driver's seat Maximum container length: 2,400 mm Maximum container width: 1,700 mm Maximum lifting capacity: 4,500 kg ...and much more. !!! Subject to errors, modifications, and prior sale !!!

Condition: used, Electric chain hoist, electric lifting unit, crane HADEF type MB 62/69 Serial no. 52795 Year of manufacture: 1979 Load capacity: 500 kg Hook path: 2.5 meters Lifting speed: 4 m/min Fine lifting speed: 1.2 m/min 2 load chains = 500 kg Power supply: 380 Volt, 50 Hz Fgsdpfsxciuyjx Ahvof - Suspension eye at the top of the crane Good condition

Condition: used, FEIN Support Grinder Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Fedpjx A Imbjfx Ahvegf Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Motor power: 350 Watts Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Ident No.: 2287997 Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Fodpfxox A Imhj Ahvsgf Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Motor speed: 4400 rpm Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Condition: used, machine/vehicle number: 1285A, mileage: 40,141 km, power: 46 kW (62.54 HP), first registration: 01/1964, fuel type: gasoline, color: green, gearing type: mechanical, Equipment: all wheel drive, trailer coupling, Oldtimer-Tuv is made new only 332,- Euro tax and insurance per year , The Willys-Jeep is the Us-Jeep of the second world war. A real feast for the eyes for every military vehicle fan. The Jeeps are in a very good original condition, also the body is in a great condition has not been welded yet has of course no holes!!!! directly from the French military very well maintained and serviced!!! Equipped with: folding windshield, soft top, manual transmission with 3 gears plus off-road reduction, four-wheel drive, 4-cylinder in-line engine side-controlled with 2161cm? The Jeep drives really great!!! Tire size 6.50 - 16, ere M201 in stock! Also other all-wheel drive vehicles and other military vehicles are still available in my offer. All my vehicles can be seen with technical data and prices on my homepage. For more information call 0049 (0)2248 le Greetings your Philipp from the Hanfbachtal Fgjdpjqx Szgofx Ahvjf

Condition: ready for operation (used), functionality: fully functional, mileage: 193,044 km, power: 125 kW (169.95 HP), first registration: 08/1999, fuel type: diesel, empty load weight: 9,290 kg, overall weight: 15,000 kg, tire size: 11 R 22,5, axle configuration: 4x2, color: orange, gearing type: mechanical, suspension: steel, number of seats: 2, Year of construction: 1998, Equipment: ABS, cabin, differential lock, * German vehicle, * double H-shift gearbox, * leaf spring suspension, Bucher Aufbah * Cityfant 60 * front disc brush * second disc brush * cylindrical brush * 11,248 operating hours * water tank * spray system * 4-cylinder Mercedes-Benz auxiliary engine * belt drive for suction unit. Fgedow Nhmvopfx Ahvef The vehicle is in exceptionally good condition for its year, several spare brushes are available. !!!!! New MOT (TÜV) available at extra cost!!!!!