Used Dantherm Welding Fume Extractor for sale (6,245)

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Ledpfx Ajit Rq Hoiweab Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure Laodohpf Iyopfx Aiwob - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance Lasdpfxeycv Sas Aiwsb - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: new, Year of construction: 2025, functionality: fully functional, Right-hand configuration with connection diameter: 350 mm, including flange JET cleaning system Motor power: 15.0 kW Lodpfx Aoy T Rg Isiwoab Filter area: 50.2 m² Nominal air volume flow: 6927 m³/h Maximum air volume flow: 10000 m³/h Negative pressure at 20 m/s in the inlet: 3620 Pascals (in the dust-laden state) Collection volume: 4 x 160 liters 5-meter connection cable with 32A CEE plug

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam gantry including 2 welding heads, each with 3 wires (without power supply). Welding possible from ø6.5 to ø11 m. Expandable up to ø13 m. 5 systems. Inspection welcome near Flensburg. B2B sales only. Laodpfeyt Ri Uox Aiwjb More photos available upon request.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller Laedpfx Aijxrb Tgowjb - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: good (used), Merkle High Pulse 450DW shielding gas welding machine in fully functioning condition, with 6 additional packs of welding wire & including a full bottle (Argon, UN1956) Ljdpox Thqkjfx Aiwjab

Condition: used, Year of construction: 1987, table length 1000 mm table width 1000 mm table load 1,5 t flange diameter 700 mm turning speed max. 0,04 U/min weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m Lajdpfxstqqkus Aiweb

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Laedpfsy Snycsx Aiwjb

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. Lajdsy Tpzdepfx Aiwjb The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Condition: excellent (used), Item description: Carl Cloos Shielded Gas Welding Machine Qineo Step 300 (IP 23) Output of 300 A at 29 V Lajdpfxoy T Nf As Aiwsb 5 units available. Price per unit. ----- Item condition: Good used condition. The unit was used exclusively in a training center. Internal number: 26.395

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Lsdpfx Aioyliq Ijweab Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Quiet operation (~

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Laodpfxjy Naq Io Aiwob Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2024, New dust extractor Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Lasdpoy R E Uuefx Aiwob Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: good (used), Clean air extraction Used machine, good condition Laedpfx Aisrb D Njweb Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, type plate available, Rehm Focus ARC P400 Ljdpfx Aoy Tzhijiwjab

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Ledpoy Inwgjfx Aiwsab Rated power 2.4 KVA 380 Volt

Condition: like new (used), Year of construction: 2018, operating hours: 41 h, As new mobile extraction unit from TEKA Model: Filtoo Lajdpfxsy Ey Rge Aiweb

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Ljdpfx Aey Rqh Teiwoab Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, 1 pipe welding machine with rotary table/indexing head SDT-0.5, capable of welding pipes with a diameter of up to 100mm and a length of 1000mm, custom-built, mobile Color: as shown in the pictures, according to the images and on-site inspection Dimensions L/W/H: 190x180x80cm Laedpfx Aioy Thlhewsb Condition: used

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,755 h, functionality: fully functional, machine/vehicle number: 12543, type of input current: AC, load capacity: 1,000 kg, input voltage: 400 V, type of cooling: water, Severt Welding Robot OTC-IRB-AX-V 6 L - Suspended 6-axis arm on 8m traversing system - OTC Daihen controller, software update from AX-C to AX-2 - 2 stations, each with a 1-axis positioner rated for 1000kg load and 1000Nm torque - Power source: OTC DP 500, 100% duty cycle at 350A, 60% at 500A - Push-pull torch - Touch sensor - Seam tracking sensor - Water-cooled gas nozzle - Wire feeding via rolliner - Torch alignment gauge included - Various accessories: hose packages, wire guide spirals, contact tips, gas nozzles, etc. Laodpfx Aeydc Eieiwsb Dismantling / transport, etc. is to be arranged by the buyer.

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Ledpfxsyx Exvj Aiweab

Condition: good (used), Tehac welding manipulator table Diameter bed: 480 mm Laodpfjldg S Isx Aiwob Height max: 113 cm

Year of construction: 2010, condition: ready for operation (used), Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement. Lajdpjy T N Iwofx Aiweb

Condition: used, Year of construction: 1977, This SCHLATTER industrial resistance welding system, type GPu 300/250, will be auctioned off in our complete online auction "Site Clearance - Fire trucks, trailers, containers, transport boxes, paternoster storage system." Further details on the machine: Industrial resistance welding system from the Swiss manufacturer Schlatter. Laedpfx Aisy Takveweb SCHLATTER welding system, type GPu 300/250, serial no. S1.3644.1095, year of manufacture 1977; primary voltage 380 V / 3-phase / 50 Hz, apparent power 196.87 kVA, welding current 230 A / 795 A, cooling water requirement 30 l/min at 4 bar. As shown in the pictures, functionality not tested. Does not include any other items shown in the pictures.