Welding turntable, turntable, welding table

Protec L Manipulator 1000 Kg HDL 1000

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Kedpfjw Ad Rrsx Ab Nonc Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts Knodpjfg Rlaofx Ab Nec · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: new, functionality: fully functional, Year of construction: 2026, 20-foot sea container | Used for one sea voyage | Immediately available | These containers have only been used for one sea voyage and are therefore almost like new. ✅ Wind and waterproof ✅ Immediately available ✅ Stable and versatile ✅ Ideal as a storage container, construction site container, or for the safe storage of materials Approximate dimensions: External dimensions: 6.06 m x 2.44 m x 2.59 m Internal dimensions: 5.90 m x 2.35 m x 2.39 m 💰 Price negotiable Special prices available for larger quantities 🚛 Delivery and unloading possible for an additional charge 📍 Please provide the exact postal code for delivery and unloading Kjdpfxszh Rc Ne Ab Nsnc If you are interested, please contact us.

Condition: used, fuel type: gasoline, empty load weight: 4 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: NEW OPEN-TOP HOOKLIFT CONTAINER FOR BULKY WASTE IN HARDOX WITH REAR OPENING AND TWO FOLDING DOORS, 160 MM BEAMS WITH ANGLE REINFORCEMENT AND COMPLETE WITH NEW MARCHESI CRANE AND NEW ROZZI FOUR-TINE GRAPPLE WITH ROTATOR AND JOYSTICK CONTROLS REF: 24-N-34 TYPE: Bulky waste NEW: yes LID: no OPENING: rear with two folding doors DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m EXTERNAL BODY WIDTH: 2.30 m INTERNAL/EXTERNAL SIDE HEIGHT: 2.00 m / 2.20 m CAPACITY: 18 m³ WEIGHT: 3,500 kg BASE THICKNESS: 4 mm SIDE WALL THICKNESS: 3 mm Ksdpfovucpfex Ab Nonc COLOUR: grey RAL 7000 CRANE DATA BRAND: MARCHESI M4T 01.60 SERIAL NO.: 0024-23 MAX LENGTH: 6.10 m (fully extended) EXTENSIONS: 1 MAX LIFTING CAPACITY: 640 kg at maximum outreach GRAPPLE DATA BRAND: ROZZI RP120 SERIAL NO.: 59860 WEIGHT: 130 kg CAPACITY: 120 L MAX LIFTING CAPACITY: 630 kg Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales department for an updated price list and terms. For more information: Loris: +39 348 477 3001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the industrial and commercial vehicle sales and purchase sector, specializing mainly in waste management. Specialists in trucks, trailers, and hooklift equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 containers, hooklift bins with or without cranes. E.&O.E. Given the large number of listings and technical details provided, Aurora invites clients to verify the information with our sales staff.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Kedpfxjua Tbwe Ab Nenc SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Knsdpfszn Iucsx Ab Noc Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: new, 15000 kg length 10000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,9 t dimensions of the machine ca. ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double steering knuckle steering Kodpfxoqux S Ie Ab Nsnc - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1320mm - impregnated wooden support. - Standard paintwork changes. On request in your Ral color. Would you like other load capacities and dimensions? Please contact us.

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg Knodpfx Aegbt Sqjb Nec surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.15 m Tilted height min. 0.45 m, max. 0.95 m Speed approx. 0.01 - 1.3 RPM, digital display Tilting up to 135° Hand and foot remote control with speed display Very robust Knodpfxsdpuapj Ab Njc This rotary table is also available in stock with 1000 kg and 3000 kg load capacity.

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Knodpfov Uvdpsx Ab Nec Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!