Used Emd C200Lt-6/4 for sale (82,158)

Condition: new, Year of construction: 2025, load capacity: 3,800 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, construction height: 2,430 mm, battery capacity: 280 Ah, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 4,880 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards, ensuring maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every unit is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ units in stock ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and consult on-site now – we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPD38-G2-4 Drive type: Electric Load capacity: 3,800 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 5,000 mm Mast type: Triplex Full free lift: Yes Overall height: 2,430 mm Fork length: 1,200 mm Unladen weight: 4,880 kg Tyres: Solid rubber Model designation: CPD38-G2-4 Battery type: Lithium-ion Voltage: 80 V Capacity: 280 Ah Battery weight: 328 kg Charger: Integrated charger Csdpfex Rwntjx Ac Nerb Lighting: Work lights 2x front Lighting: Work light 1x rear Lighting: Rotating beacon Lighting: Road traffic specification (StVO) – suitable for (limited) on-road use: indicator lights, tail lights, reversing lights, reflectors, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit routed to the fork carriage

Condition: new, Year of construction: 2025, load capacity: 3,800 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,555 mm, battery capacity: 280 Ah, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 4,880 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. READY FOR PROFESSIONALS IN ACTION Crjdpfx Acjx Rwnmo Njb Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From frame to battery, including drive, brakes, steering, and electrics—each truck is thoroughly inspected and overhauled. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide transport & customs handling ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test and get advice on site now—we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Type: Counterbalance forklift CPD38-G2-4 Power type: Electric Rated capacity: 3,800 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 5,400 mm Mast type: Triplex Full free lift: Yes Overall height: 2,555 mm Fork length: 1,200 mm Unladen weight: 4,880 kg Tyres: Solid rubber Model designation: CPD38-G2-4 Battery type: Lithium-ion Voltage: 80 V Ah: 280 Ah Battery weight: 328 kg Charger: Integrated charger Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic kit for potential use on public (restricted) roads: indicators, tail light, reversing light, reflectors, etc. Attachment: Sideshifter Attachment: Additional hydraulic circuit routed to fork carriage

Condition: new, Year of construction: 2025, load capacity: 3,800 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,780 mm, battery capacity: 280 Ah, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 4,880 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are technically refurbished according to FEM-4.004 and in line with current safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – each vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with care and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance Crsdpfxjx Rwngs Ac Nsb ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on site now and receive professional advice – we will find the right solution for you. Industrial Truck Data: Manufacturer: Heli Type: Counterbalance Forklift CPD38-G2-4 Drive type: Electric Lifting capacity: 3,800 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 6,000 mm Mast type: Triplex Free lift: Yes Collapsed height: 2,780 mm Fork length: 1,200 mm Unladen weight: 4,880 kg Tyres: Solid rubber Model designation: CPD38-G2-4 Battery type: Lithium-Ion Voltage: 80 V Capacity: 280 Ah Battery weight: 328 kg Charger: Integrated charger Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road-legal equipment (StVO compliant for possible restricted on-road use): indicator lights, tail lights, reversing lights, reflectors, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit – routed to fork carriage

Condition: used, mileage: 76,270 km, power: 471 kW (640.38 HP), first registration: 10/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Plung at WSK, electric glass sunroof, electrically adjustable and heated mirrors, control module located above the sleeper bed, Net-Black decorative trim on the dashboard, electric sunblind, smoker package, reverse warning system, cornering light, 4 work lights, LED daytime running lights, 2 rotating beacons, MAN sound system, video function with USB/SD interface, navigation (Europe SD card), DAB+, AUX/USB, Rio Box, MAN Smart Link, pre-installation for rear-view camera, Rockinger 56 EU tow hitch mounted below, JOST JSK 38 C 3.5" fifth wheel coupling (loose), 3-stage hydraulic system for heavy haulage, additional hydraulic connections at the end of the frame and at the front cross member for heavy transport. Cedpfx Ajlxw Auoc Njrb

Condition: new, functionality: fully functional, Laser source: MAX Photonik Laser head: Boci BLT5 bevel head Processing range: Diameter: 40-550 mm Length: 4-12 m loading, 0-12 m unloading Load capacity: Max. 3000 kg Crodpswtzp Hsfx Ac Nsb Servo support CNC control: FSCUT5000S EtherCAT-BUS Software: CAD/CAM: TubesT, Tube Pro

Condition: new, MODEL Unit GENIUS PRO B32.220 (220 tons x 3200mm) CNC Control Axis Y1 ,Y2 ,X, R-axis with Crowning Bending force Ton 220 Bending length mm 3200 Positioning accuracy etc. 0.005 Distance between columns mm 2700 Bending Accuracy Degree ±2'/Per meter Beam Stroke mm 200 Credewpuftepfx Ac Nsb Daylight mm 460 Throat Depth mm 750 Table width mm 120 Working table height mm 1025 WORKING SPEED: ACCURL® EVO-GO HYBRID SERVO SYSTEM Rapid Speed mm/sec 180 Work Speed mm/sec 0~15 Return Speed mm/sec 160 REAR GAUGE: Max Travel X-Axis mm 800 Max Travel R-Axis mm 250 Max Travel Z-Axis etc 3550 CAPACITY: Hydraulic pressure Bar 275 Hybrid Servo Motor KW 18.5 Ambient temperature range °C 0 bis To +40 Overall dimensions mm 3950×2050×2950 Machine weight Kgs 12200 Power supply AC 220V~480V, 3ph, 50/60HZ

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. Csdpfx Asx Enduec Njrb – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump – Window folding pocket – Various spare parts

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Planing width 220 mm 6 heads with universal .Controlled from a portable console .The machine has safety guards . Crodpfxoud Raxo Ac Nsb

Condition: used, mileage: 94,174 km, power: 375 kW (509.86 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 14,835 kg, maximum load weight: 12,720 kg, overall weight: 32,000 kg, tire condition: 80 %, axle configuration: > 3 axles, wheelbase: 3,900 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 2,550 mm, total width: 3,900 mm, total height: 10,800 mm, loading space length: 3,500 mm, number of beds: 1, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, | Volvo FH 500 8x4 animal carcass transport | I-Shift, retarder | leather seats | LED headlights | steering, lifting axle | automatic, EURO 6 | tail lift 3000kg | heated seats, auxiliary heating, air conditioning, refrigerator | cruise control, electric windows, electric mirrors | alloy wheels | wheelbase: 3900/1370/1380 | tires 385/55/R22.5 | rear view camera | Austrian vehicle | auxiliary air conditioning | very good condition and well maintained! | data sheet for more detailed information on request | errors, input errors and pre-sales excepted. Crsdov Tv Sdspfx Ac Neb

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 3 Rotary Indexing Systems + 3 Linking Robots OVERVIEW - Bar feeder - Rotary indexing system 1 (cutting + machining clamping 1) - Rotary indexing system 2 (machining clamping 2) - Placement on conveyor belt - Marking - Deburring unit - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the saw clamp and transfers it to the clamping fixture of rotary indexing system 1 (station 1) Rotary indexing system 1 (machining clamping 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), threading M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second system Rotary indexing system 2 (machining clamping 2) Station 1: Robot takes the part from station 6 of system 1 and places it into the clamping fixture of the second rotary indexing system Station 2: Contour milling bottom Station 3: Slot milling (2x) Station 4: Contour milling bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Insertion height: approx. 1200 mm Parts buffer: 10 bars Rotary indexing system 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feeds: 14+1+5 NC axes Rotary indexing system 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feeds: 9+1+3 NC axes Discharge conveyor Chain conveyor: workpiece carrier made of plastic Incline: approx. 3° Length: 8,000 mm Part inquiry: at loading station / marking station / unloading station Rotary indexing system 3 - SEMA REA 30/5-6S-NC-R Number of positions for deburring: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Extension of deburring unit: blowing off of workpieces Robot: for loading and unloading the deburring unit, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Crodpfxjwqf R Nj Ac Neb Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. Crjdpfxsyzbm Uo Ac Nsb The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Crodpfewaa Tdex Ac Nob

Condition: ready for operation (used), Year of construction: 1989, MACHINE: BOBST Domino 85-M Manufacturer: BOBST SA Model number: Domino 85-M Machine type: Folder-gluer Year manufactured: 1989 Machine Format: 850 x 800mm Technical Specifications: Convertible stock Solid up to 700 g/m2 Corrug. up to B flute Thickness 15 mm Sizes: standard boxes (blanks open) Width max 850 mm Width min 56 mm Length max 800 mm Length min 60 mm Drive System Inching speed 8 m/min Operating speed 20 - 400 m/min Crash lock bottom device Special version for 4/6 corner gluing HHS gluing system with 3 guns N. 2 gluing points disc system Crsdpfx Acex S Uuye Njb Belt pressing system delivery Main motor 21 kW Dimensions Length 14120 Width 2200 mm Weight 7000 - 10000 kg

Condition: used, Wickman 1-3/4" 6-Spindle SN: 16814 Electromagnetic Clutch Stock Reel and Stand Threading Chip Conveyor 6 Cross Slides 4th Pos. Logan Universal Threading Cleaned and Painted Recently taken out of Production Cedpjyzkf Hjfx Ac Nsrb Checked under power Can be equipped for your requirements

Condition: new, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, number of gears: 16, Year of construction: 2025, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - Spare wheel - Sun visor = Remarks = Model description: IVECO T-WAY Tractor 6×4 AT720T47TH GVW 26-38 Ton HP 470 R20Tyre MY25 Tractor Head Code Diesel Type: AT720T47TH GVW: 26-38 TON Fifth Wheel: Jost fifth wheel Rear Axle: HR-TP Tyres: 20497 - Tyres 12.00R20 Drive Hand: LH Drive engine power: C13-470 CV Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Credpfxjw Dukxo Ac Nsb Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross Cedpjy Ixgxefx Ac Norb You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Credpfx Acju R S Nwj Njb Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Crsdpfx Aey Ih Rgsc Nsb Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Codpfxeyvgp Te Ac Njrb Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Device in good technical condition Visible signs of use Machine is operational

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Industrial installations Water circulation pumps HVAC systems Crjdeywu Uqspfx Ac Nsb Heating and cooling installations Pumping stations

Condition: excellent (used), functionality: fully functional, saw blade diameter: 180 mm, We offer this very good Format-4 300-24-006 aggregate. This was ordered and rarely used, sat on the shelf for the last couple of years. Will come with a carpeted timber box we've made for it. Model Number: Format4 300-24-006 Interface: HSK-63F Gear Ratio: 1:1. Max Input Speed: 15,000 RPM. Max Torque: 20 Nm. Angle Adjustment: Manual swivel from 0° - 100°: Csdpoyrpk Usfx Ac Njrb Any other questions, please get in touch. Currently listed on the Felder website for £5346 - €6153

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. Codpfoy Aam Nsx Ac Nsrb High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device Cjdpfsy Aagiex Ac Norb visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Crjdpfx Aced Tbbdo Njb - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Credpfx Acefdkb Tj Nob Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.