Used Emd C200Lt-6/4 for sale (82,127)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: Bwedpfx Aofdkb Tsl Isl - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Bedsd Tqalopfx Al Ijwl - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Bjdpfx Aloguk A Ho Ijwl - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Bedjguk Dvspfx Al Ijwl - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, number of shelf rows: 6, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) Bwjdpfjyz Ibfjx Al Iol - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x stacking box, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Bwedpfx Aljhm Sllo Ijl Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x closing lid, II choice Manufacturer: SSI Schäfer lid type: VD-14/6-A suitable for stacking box SSI Schaefer 14/6-A Material color: green Material: steel, lacquered Dimensions: approx. 520x320x35 mm (LxWxH) own weight: approx. 2,481 kg 4 pull locks General information about the article: Bwjdpfx Ashr I I Nel Ijl This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 80x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Bwodpfxshm Slte Al Iel Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: Bjdpfx Aljhm Slpe Iowl These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation Bwedoy Dg N Topfx Al Ijl - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: ready for operation (used), Stöber FDS50007/L HW 19 SW V5.3C Posidrive servo drive, serial number: 8712903, MDS5000 LEA5000 . 49029, device number: 8706279, SW HW 3, used, in good condition, fully functional, scope of delivery as shown in photos. Bwodpfxex Eu Sle Al Isl

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Bwedpfxew Sy D Ee Al Isl

Condition: excellent (used), Year of construction: 2004, GUK Folding Machine FA 45/6 FL2-45 - with 6 folding pockets - high-pile feeder - with counter - Max. paper size 460 x 650 mm - Min. paper size 85x100 mm (60x100 mm – special option) - Minimum fold 18 mm (on first pocket 26 mm) - Output capacity 10–30,000 depending on material - 6 folding pockets, 450 mm feed width - with noise protection - steel-rubber rollers - special accessories: window folding pockets - Rollers and belts in good condition - Location: Germany - Available – immediately Well-maintained machine Machine is technically and visually in very good condition Bwodpfx Ajvr Iq Ajl Iol

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4120-PRO DA-66T Specifications - Nominal bending force: 2000 kN - Motor power output: 18.5 kW - Approach speed: 160 mm/s - Bending speed: 10 mm/s - Return speed: 110 mm/s - Weight: 12500.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm - Distance between side frames: 3550 mm - Ram width: 1600 mm - Table height: 880 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution Bedovwmi Iopfx Al Iswl - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4124-PRO DA-66T Specifications - Nominal bending force: 2400 kN - Motor power output: 22.0 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14000.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm - Distance between side frames: 4100 mm - Ram width: 3550 mm - Table height: 1610 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Bwodpfxsvwmkfj Al Iol Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC Delem DA-58T Specifications - Max working thickness (S235): up to 8.0 mm - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation Bwjdpfx Astizavjl Isl - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: excellent (used), For sale: a set of professional SK40 AD/B 6×80 tool holders according to DIN 69871 standard. The holders are in good technical condition, complete – some fitted with VHM/HSS drills of various diameters. Shank diameter: Ø6 mm Length: 80 mm Clamping type: SK40, DIN 69871 AD/B standard Condition: used, fully functional, visible signs of use (discoloration from heat). Ideal for CNC machining centers, milling machines, and precision drill presses. Bsdpfxoxcx Uvj Al Ijwl

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. Bwsdpfow Syzwex Al Iel -- PRICE PER PIECE --

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Bsdpfx Alsxllcle Iswl

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Bwsdjxbfutjpfx Al Isl

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm Bwsdeyvqdfopfx Al Ijl 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), mileage: 826,754 km, power: 331 kW (450.03 HP), first registration: 03/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,450 mm, total width: 2,550 mm, total height: 3,720 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, = Further Options and Accessories = - Heated mirrors - CarPlay - Digital tachograph - Tachograph (monitoring device) - Halogen lamp - Manual [operation] - Radio/cassette - Slider - Sleeper cab - Lane departure warning system - Fabric - Additional brake system = Notes = Bedpfx Aey I R Rpel Iowl Number of axles: 3, Configuration: 6x2, Unladen weight: 8,992 kg, Gross weight: 26,500 kg, Total tank capacity: 540 liters, Fifth wheel height: 112 cm, Fifth wheel: slider, Number of differentials: 1, Suspension type: full air, Cab type: sleeper cab, Cruise control, Tachograph (monitoring device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Colour: Red, Heated mirrors, Lighting type: halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 331 kW (444 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission manufacturer: Scania, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 1+1, Seat cover: fabric, Seat adjustment: manual = More Information = Transmission Transmission: SCA, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tyre size: 315/70R22.5; Steered; Tyre tread left: 5 mm; Tyre tread right: 4 mm Axle 2: Tyre size: 315/60R22.5; Lift axle; Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Axle 3: Tyre size: 315/60R22.5; Twin tyres; Tyre tread inside left: 5 mm; Tyre tread outside left: 5 mm; Tyre tread inside right: 5 mm; Tyre tread outside right: 5 mm Weights Unladen weight: 8,992 kg Payload: 17,508 kg Gross vehicle weight: 26,500 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used commercial vehicles. Here you can always choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, model years, and price classes. Why buy at Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly for our European warranty packages.

Condition: good (used), mileage: 652,251 km, power: 368 kW (500.34 HP), first registration: 11/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, seat heater, traction control, = Additional options and accessories = - Heated mirrors - Carplay - Digital tachograph - Tachograph (control device) - Highline - LED lamp - Manual - Radio/cassette - Sliding fifth wheel - Lane assist - Additional brake system = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 9,540 kg, Gross weight: 27,000 kg, Total tank capacity: 540 liters, Fifth wheel height: 118 cm, Fifth wheel type: sliding, Number of differentials: 1, Suspension type: full air, Cabin type: Highline, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, Colour: blue, Metallic, Heated mirrors, Lighting type: LED lamp, Lane assist, Air conditioning, Seat heating, Bluetooth, Flashing lights, Engine power: 368 kW (493 hp), Fuel type: diesel, Euro standard: 6, Transmission type: Opticruise, Gearbox model: Scania, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seating: 1+1, Seat material: leather, Seat adjustment: manual = Further information = Transmission Gearbox: SCA, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tyre size: 385/65R22.5; Steerable; Tyre tread left: 5 mm; Tyre tread right: 7 mm Axle 2: Tyre size: 385/55R22.5; Lift axle; Steerable; Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 3: Tyre size: 315/70R22.5; Dual-mounted tyres; Tyre tread inner left: 4 mm; Tyre tread outer left: 4 mm; Tyre tread inner right: 3 mm; Tyre tread outer right: 4 mm Weights Curb weight: 9,540 kg Payload: 17,460 kg Gross vehicle weight: 27,000 kg Interior Upholstery: leather Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Financial information Leasing price: €1,010 per month (default, 60 months); Please inquire for further details and conditions Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the largest independent dealers of used vehicles worldwide. Here, you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive price • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates quickly arranged • Expert technical services • The assurance of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package. Bwsdpfx Aexfgq Dsl Ijl

Condition: good (used), mileage: 655,652 km, power: 368 kW (500.34 HP), first registration: 11/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,520 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Carplay - Digital tachograph - Tachograph (control device) - Highline - LED lamp - Manual - Radio/cassette - Sliding fifth wheel - Lane departure warning system - Auxiliary braking system = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 9,540 kg, Gross weight: 27,000 kg, Total fuel tank capacity: 540 liters, Fifth wheel height: 118 cm, Fifth wheel: sliding, Number of axle locks: 1, Suspension type: full air suspension, Cab type: Highline, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Multicolor, Metallic, Heated mirrors, Lighting: LED lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Flashing lights, Engine output: 368 kW (493 Hp), Fuel type: Diesel, Euro: 6, Gearbox type: Opticruise, Gearbox make: Scania, Gears: 12, Auxiliary braking system, Retarder make: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat upholstery: leather, Manual seat adjustment = Further information = Gearbox Gearbox: SCA, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tyre size: 385/65R22.5; Steering axle; Left tyre profile: 12 mm; Right tyre profile: 12 mm Axle 2: Tyre size: 385/55R22.5; Lift axle; Steering; Left tyre profile: 10 mm; Right tyre profile: 10 mm Axle 3: Tyre size: 315/70R22.5; Twin tires; Left inner tyre profile: 7 mm; Left outer tyre profile: 8 mm; Right inner tyre profile: 7 mm; Right outer tyre profile: 8 mm Weights Curb weight: 9,540 kg Payload: 17,460 kg Gross vehicle weight: 27,000 kg Interior Upholstery: leather Condition Technical condition: good Visual condition: good Damage: none Number of keys: 4 Financial information Leasing rate: €1,010 per month (default, 60 months); Please ask for further information and terms Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. You can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Ethical business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of “recognizable quality” • And much more… Please visit our website for special offers and our full inventory. Leasing through Kleyn Trucks is available in most European countries! Bwsdpfxsxd Sbro Al Isl Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 494,984 km, power: 368 kW (500.34 HP), first registration: 04/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 3,780 mm, total width: 2,550 mm, total height: 3,730 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Carplay - Digital tachograph - Tachograph (control device) - Fixed - LED lamp - Alloy wheels - Manual - Radio/cassette - Sleeper cab - Lane Departure Warning System - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Unladen weight: 8,886 kg, Gross weight: 28,000 kg, Total tank capacity: 480 liters, Fifth wheel height: 117 cm, Fifth wheel: Fixed, Number of differentials: 1, Alloy wheels, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Turquoise, Heated mirrors, Lighting type: LED lamp, Speed limiter, Lane Departure Warning System, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 368 kW (493 Hp), Fuel type: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox make: Scania, Speed limiter, Gears: 12, Auxiliary braking system, Retarder make: Scania, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat material: Leather, Manual seat adjustment Transmission Gearbox: SCA, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/55R22.5; Steered; Tyre tread left: 12 mm; Tyre tread right: 12 mm; Suspension: leaf spring Axle 2: Tyre size: 315/70R22.5; Lift axle; Steered; Tyre tread left: 6 mm; Tyre tread right: 6 mm; Suspension: air suspension Axle 3: Tyre size: 315/70R22.5; Twin tyres; Tyre tread left inside: 15 mm; Tyre tread left outside: 15 mm; Tyre tread right inside: 15 mm; Tyre tread right outside: 15 mm; Suspension: air suspension Weights Curb weight: 8,886 kg Payload: 19,114 kg gross combination weight (GCW): 28,000 kg Interior Upholstery: Leather Bjdpfxsw S Ddie Al Iowl Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 4 Financial Information Leasing price: €1,037 per month (default, 60 months); Contact us for more information and terms. Identification Registration number: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. You can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands covering all years of manufacture and price categories. Why choose Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive prices • Sound business practices • Multilingual staff • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And much more.... Visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request on our website. Ask directly about our European warranty package.