Used Flex Agitator for sale (1,072)

Condition: ready for operation (used), For sale is a stirrer motor from TMR, including the drive shaft. This is model MD 5.5 / 1000. Pgjdpfx Agsfwlz Ij Ten Product data: 1440 RPM 380/660 V 5.5 kW 1520 mm shaft length 3 kW

Condition: used, Equipment: type plate available, Electrically heated agitator tank with double jacket and insulation Pgjdpfew Ic Niox Ag Tjn Article number: 10707 Volume: 300 L Type: Vertical, standing on 3 legs Leg height: 220 mm Material (product-contact): V2A stainless steel Design: Electrically heated Operating pressure according to nameplate: ATM (atmospheric) Tank dimensions: Internal diameter: 700 mm External diameter: 950 mm Cylindrical height: 730 mm Total height: 2030 mm Total width: 1120 mm Total length: 1340 mm Equipment: Nameplate: Yes Discharge to floor distance: 415 mm Outlet valve: Ball valve Outlet diameter: DN40 Opening: 235x750 mm Beam agitator Double jacket: 100 L Insulated Control cabinet Foldable lid 1/2

Condition: new, Factory-new stainless steel agitator tank with propeller agitator Type: CILC100BRWP Volume: 109L Design: Vertical construction on legs Version: Single-walled Product-contact material: 1.4301 stainless steel Surface: Satin-finished exterior, interior BA finish Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Hinged lid, half bolted, half foldable Bottom: Conical bottom with forward-extended DN25 pipework, DIN11851 Tank dimensions: Tank diameter: 477mm Overall height: 930mm (plus agitator motor) Cylindrical height: 600mm Leg height: 330mm Equipment: - Hinged lid with stainless steel sheet grate as reach-in protection, bolted, removable - Hold function for hinged lid - 1x DN25 discharge ball valve, DIN11851 Agitator: Propeller agitator Brand: Schwarzer Rührtechnik GmbH Pgodew Dy H Sjpfx Ag Tsn Type: SRT4-1000 Power: 0.25kW Speed: 980 RPM Operating voltage: 3PH 400V Product-contact material: 1.4301 stainless steel - Heavy-duty agitator shaft mounted to agitator motor, non-removable - Shaft balanced for concentricity within speed range - 1 piece 3-blade mixing propeller Ø125mm screwed onto end of agitator shaft - Stainless steel flange with V-ring seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, emergency stop, phase inverter, no-voltage release

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Pjdpfx Aorl Rtusg Togn Inner diameter: 700mm Outer diameter: 800mm Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Podpsw Dy Hlsfx Ag Togn Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Pgedpfjw Dy Ngex Ag Ten Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Condition: excellent (used), Used agitator tank / paste mixer With pump / conveying unit Item number: 10314 Volume: approx. 70 liters Previous application: Food processing Type: Upright in frame Material (wetted parts): Stainless steel Number of fixings: 4 Bottom: Conical bottom Top: Hinged lid with charging opening Tank dimensions: Internal diameter: 380 mm External diameter: 400 mm Leg height: 745 mm Distance from outlet to floor: 180 mm Pjdpfoxdw Rlex Ag Tjgn Total height: 1620 mm Total width: 650 mm Materials: Internal: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Agitator: Spiral agitator / anchor agitator with wall scrapers Features: Nameplate: No Outlet: Bottom valve Pump / conveying unit beneath the tank Agitator function tested, pump / conveying unit not tested

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Pedpjw U Sw Aofx Ag Togn Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: excellent (used), Year of construction: 2010, Sterile tank with agitator, temperature-controlled, upright Technical data / dimensions Available quantity: 1 Volume: approx. 6,000 liters Container type: Sterile tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,700 mm External diameter: approx. 1,854 mm Cylindrical height: approx. 2,264 mm Total height: approx. 5,390 mm Weight: approx. 2,030 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: negative pressure/vacuum Operating pressure: 3.5 bar Test pressure: 5.4 bar Wall thickness bottom: approx. 5.2 mm Wall thickness top: approx. 8.4 mm Wall thickness jacket / cylinder: approx. 5.2 mm Ground clearance: approx. 800 mm Operating temperature: 150 degrees Celsius Type plate available Manufacturer: GEA serial no.: 2376 Year of construction: 2010 Psdstyz Izjpfx Ag Tegn Material / condition Material inner jacket: V2A (1.4541) Material double jacket: V2A (1.4541) Feet material: V2A (1.4541) Outer surface: bright rolled 2B Internal surface: Ground Ra

Condition: ready for operation (used), 1 cylindrical, vertical mixing tank made of stainless steel, used Capacity: 50 cbm Order number: 3750 Material: V2A Dimensions: 3,300 mm diameter 5,700/5,900 mm cylindrical height 400 mm upper bottom 1,700 mm height of the agitator 8,000 mm overall height Design: Cylindrical, vertical with a flat bottom that slopes inwards towards the outlet - must be supported during installation, otherwise the bottom will crack - with a conical upper bottom Trapezoidal agitator mounted centrally from above approx. 5 kW, approx. 30 rpm with an external half-pipe coil, 18 m² on the cylinder, tested for tightness with an operating overpressure of 2 bar upper bottom insulated, with a cover Stainless steel, fully welded Connections: 1 manhole 340 x 440 mm in the cylinder 1 spray nozzle centrally at the top 2 connections DN 65 at the lowest point Weight: approx. 5 tons Psdpfxeiq Izds Ag Tsgn

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Design: cylindrical standing on frame with conical bases Pjdpfsv Dthwex Ag Tsgn Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover with manufacturer's certificate and material certificates Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Weight: approx. 6.5 tons

Condition: new, Bernardo swivel bending machine with segmented upper, lower, and bending beam TB 1020 Flex Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width with segments 48 mm Max. opening width without segments 150 mm Max. clearance height closed 125 mm Bending angle 0 – 135° Back gauge 600 mm Working height 900 mm Width 1400 mm Depth* 1070 mm Height 1260 mm Weight approx. 430 kg * with back gauge Features Piano inserts in the upper, lower, and bending beam provide a large number of bending possibilities. Casing and special profiles with opposing bends can be easily produced with these models. Universally applicable bending machines for sheet metal workshops and repair shops. Simple swiveling movement of the bending beam via a handle. Pedpod Hxm Iefx Ag Tjgn Easy adjustment of the upper beam for efficient work. High upper beam for producing high-flanged profiles. Large-sized flat guide for precise work. An auxiliary cylinder supports the bending process during hemming. Scope of delivery Segmented upper, lower, and bending beam Back gauge Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Year of construction: 2006, condition: ready for operation (used), CME horizontal milling machine Type MB 3000 FLEX Rotary table size 1.400 x1.400 mm Max. table load 12T Longitudinal travel (X) 3.000 mm Vertical travel (Y) 2.000 mm Cross travel (Z) 1.000 mm Drill travel (W) 700 mm Rotary table (B) 360 - 0,001 degree Boring spindle dia. 150 mm Spindle speed 50-2200 rpm Spindle taper 50 ISO Spindle motor power 30 kw Ram size 580-430 mm CNC Controller Heidenhain iTNC530 Accessories: Cooling through spindle 60 bar ATC 60 pots Pgedpfx Agsgui Txo Ton Hours: Spindle 27.048 hours Machine dimensions: Height 4.856 mm Length 6.663 mm Width 10.000 mm Weight 70 T Build year 2006

Year of construction: 2010, condition: excellent (used), Stainless Steel Conatiner with Agitator, heatable with Pump Pgjdpfx Ashytideg Ton

Condition: used, Year of construction: 1995, turning diameter 890,820 mm turning length 4000 mm control Siemens SIN 880T spindle taper DIN 55026/15 spindle passage 122 mm cross movement 500 mm quill stroke 140 mm tailstock adjustment 3708 mm Pgjdpfxeyuqkho Ag Tjn spindle turning speed range 5-1800 U/min milling tool taper 1500-6000 U/min feed 0,5-5000 mm/min rapid traverse 15 m/min feed power 22000/10000 N Tool changer 95 St. steady CNC tail stock CNC total power requirement 50/69 kW weight of the machine ca. 23,5 t dimensions of the machine ca. 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2022, condition: new, Stainless steel design Motor power: 1.1 kW Rotation direction: left - right Agitator shaft length: 1000 mm Agitator blade diameter: 150 mm Pgjdpfxs Hnmvj Ag Tjn

Condition: used, Year of construction: 2024, Equipment: compressed air brake, incl. special design chassis frame, smaller frame width, track / 1900mm, platform height approx. 1550mm, side dropside only possible in swinging position / Pgodpfotgtm Hsx Ag Ten

Condition: used, Year of construction: 2024, left + right, tarpaulin can be rolled from left to right, aluminum tube, service platform 2 / pcs. belt ratchets left, center frame, total height 325 560/60R22.5 side / dropside only possible in pendulum mode 40 km/h COC EU with 1 lifting cyl. with / 2-wire DL brake with A Pgjdpfx Aet R R S Aog Ten

Condition: used, Year of construction: 2024, Tarpaulin can be rolled from left to right, aluminum tube Operating platform 2 pcs. / belt ratchets on the left Center bows Total height 325mm Standard tyres 385/65R22.5 / 40 km/h with 2 lifting cylinders with 2-wire DL brake with ALB Tarpaulin superstructure with / roller tarpaulin Topsat Pgjdpfx Ast A Itueg Tjn

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Dropside height: 800mm Extension dropside height: 800mm / Pgsdpet Ty Irjfx Ag Ton

Condition: used, Year of construction: 2024, Attachment wall height 1.AW (mm): 500 Plate bottom thickness (mm): 4 Axle square (mm): 70 / Track (mm): 1550 No. of hard-chr. Lifting cylinders: 1 Step diameter 1 (mm): 90 / Step diameter 2 (mm): 75 Step diameter 3 (mm): 60 Cylinder stroke (mm): / 1400 Tilt w Pgjdjr H D Txspfx Ag Ten

Condition: used, Outer diameter: 340mm Bolt circle: 290mmHole diameter: 23mm Podpfexytybox Ag Togn

Condition: new, functionality: fully functional, machine/vehicle number: 01.1977823101.0010.15, power: 1.1 kW (1.50 HP), overall weight: 28 kg, protection type (IP code): IP54, Multiple available. Agitator is made of stainless steel. Frequency: 50/60 Hz Insulation class: F A: 2,40 r/min: 2900/225 Voltage: 380-500 V Pgodpou E Ug Uofx Ag Ten This SEW agitator is a powerful and versatile solution for process and process engineering applications. With a robust design, this agitator offers reliable performance that is ideal for mixing, stirring and homogenizing liquids and bulk solids. The motor ensures efficient power transmission, while the integrated mechanics enable precise control of the stirring speed. Thanks to its high flexibility and adaptability, the FHZ37 agitator is ideal for use in various industries, including chemicals, food processing and water treatment.

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Psdjxhntrepfx Ag Tegn

Condition: ready for operation (used), Year of construction: 2015, Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible. Pgsdpfx Agsvmgt Eo Ton