Used Gauge Caliber for sale (1,946)

Condition: used, first registration: 11/2024, color: black, Manufacturer: Bickel Tec platform low-loader with access ramps Length: 13,600 mm Loading height: approx. 880 - 900 mm GVWR (legally permitted): 40,000 kg GVWR (technically possible): 48,000 kg Fifth wheel load: 18,000 kg Itodezx Uvuepfx Aa Rol Axle load max: 3 x 9,000 kg / 10,000 kg Unladen weight: approx. 11,900 kg Floor: BICKEL heavy-duty perforated floor made of fine-grained steel with anti-slip surface 64 tie-down points, each with a capacity of 7.5 tons. The perforated floor allows for securing loads with a capacity of 3 tons each. Loading platform for loading the gooseneck, hydraulically adjustable (height) Suitable for transporting in the raised and loaded state up to a maximum of 10 tons. Ramp angle: approx. 6° Taper at the gooseneck: approx. 900 mm x 6° Taper at the rear: approx. 1,650 mm x 6° 4 x stainless steel toolboxes Winch: Electric winch Come Up DV 18 for 8,200 kg pulling force, incl. 27 meters of 13 mm wire rope, remote control Ramps: Ramp length 4,800 mm, width 750 mm, approx. 6° approach angle Access ramps: Split access ramps with hydraulic lateral adjustment, fully extendable with hydraulic extension of the entire ramp, with mechanical telescopic pivoting supports. Additional extension support legs mounted on the ramp Axles: All three axles with hydraulic forced steering Follow-up steering controlled via radio remote control Follow-up steering via 24-volt electric unit. With pressure gauge. 1st axle: Lift axle Tires: 12 tires / 235/75 R 17.5 Supports: Drop-down supports front and rear, 1 x telescopic hydraulic cylinder on the right and left Sale exclusively to commercial businesses, with exclusion of any warranty. Errors and prior sale excepted.

Condition: good (used), Maqfort HGD 3013 3200x13mm Runs well, but the back gauge needs to be checked! Itedpezdzn Usfx Aa Rel

Condition: used, Year of construction: 2005, Overview Itodjzidx Hjpfx Aa Rjl This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Ijdozyanljpfx Aa Rotl Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, Year of construction: 2025, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. Ijdpfjwzh A Njx Aa Rjtl The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Special price: only €35,700 gross! (Instead of the regular €38,675 gross – you save €2,975!) The KINGWAY VIP38 is a modern, powerful mini excavator specifically designed for construction, installation, and paving contractors. Equipped with the reliable KUBOTA engine, it offers high performance, low fuel consumption, and long service life. Its compact dimensions and 3,950 kg operating weight make the VIP38 suitable for both tight urban areas and large construction sites. A robust hydraulic system, impressive digging forces, and a wide working range make it an indispensable tool for a variety of earthmoving tasks. INCLUDED EQUIPMENT: - 3 buckets - Hydraulic quick coupler - Hydraulic thumb - Earth auger Model: KUBOTA D1703 Power: 18.5 kW / 25 HP at 2,200 rpm Type: In-line engine, water-cooled, 4-stroke, mechanical pump, naturally aspirated Max. torque: 97.4 Nm at 1,500 rpm Displacement: 1.647 l TRACK UNDERCARRIAGE: Max. travel speed: 4.4 / 2.4 km/h Track width: 300 mm Carrier rollers (per side): 1 Track rollers (per side): 4 OPERATING PARAMETERS: Bucket capacity: 0.12 m³ Platform swing speed: 9 rpm Gradeability: 58 % Ground pressure: 32 kPa Bucket breakout force: 30.4 kN Arm breakout force: 18.2 kN Hydraulic pressure: 22.5 MPa Operating weight: 3,950 kg Boom length: 2,535 mm Arm length: 1,400 mm Fuel tank: 42 l Hydraulic oil tank: 48.5 l Oil sump: 7 l DIMENSIONS: Overall dimensions (L × W × H): 4,915 × 1,720 × 2,525 mm Track length on ground: 1,670 mm Total track length: 2,154 mm Itedpfx Aaoyk Skhj Rjl Track gauge: 1,420 mm Minimum ground clearance: 295 mm Counterweight swing radius: 860 mm Front swing radius: 2,538 mm Blade height: 350 mm WORKING RANGE: Max. digging height: 4,800 mm Max. dumping height: 3,406 mm Max. digging depth: 3,208 mm Max. vertical digging depth: 2,957 mm Max. reach: 5,480 mm Max. reach at ground level: 5,359 mm Minimum swing radius: 2,530 mm Height at minimum swing radius: 3,655 mm Max. blade lifting height: 365 mm Max. blade digging depth: 385 mm Boom swing angle (left/right): 55° / 65° PRICE: €32,500 net €38,675 gross

Condition: new, Year of construction: 2026, power: 37 kW (50.31 HP), _____Standard equipment: special low-profile design, 3-cylinder Kubota D1803-CR-T diesel engine, 37 kW (50 hp), DOC and DPF to meet emission stage V, hydrostatic all-wheel drive with automatic control, tires 10.0/75-15.3 AS- ET-5 HTF (High Traction Force) SPT (Schäffer Power Transmission), ECO mode, hydraulic quick gear, switchable 20 km/h under load, original Schäffer axles, 6-hole, combined oil cooler, maintenance-free and wear-free disc brake in an oil bath as service and parking brake, maintenance-free articulated oscillating joint, retention system (driver protection roof), LED work lights: 2x front, 1x rear, parallel guidance, additional control unit mechanically operated, work hydraulics, standard / optional: 46/51 l/min, adjustable steering column, operating hour meter, fuel and temperature gauges, rear weight end plate, seat contact switch, quick-change frame SWH with hydraulic locking. Iodjzzhb Aspfx Aa Rotl Optional equipment: Tires 15.0/55-17 AS 6-hole, ET -45, attachment frame Euro-WS, hydraulic locking, counterweight 100 kg, gear pump reinforced 19ccm, additional control unit, electrically operated, ELPRO version, preparation for lighting system, towing device with pin and lashing eyes, storage location: null.

Condition: used, maximum load weight: 33,036 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 8,500 mm, loading space width: 2,440 mm, loading space height: 1,900 mm, loading space volume: 40 m³, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2025, Equipment: ABS, Equipment: Lift axle, spreader, air suspension with lifting/lowering device, support legs, tire tread depth: 100% Safety & Environment: ABS, disc brake, EBS ----* Schmitz SKI 24SL 8.2 * Aluminum box body, 40 m3, with grain discharge slide * Tare weight: 5760 kg * Load pressure gauge * Schmitz Rotos axles * Axles 1 and 3 are liftable * Electric air suspension system * 2 x 7-pin sockets and 1 x 15-pin socket * Low-pressure cylinder, max. 170 bar * Inner wall thickness 3.5 mm, floor 8 mm * Roof-shaped cover frame, spreader, lashing chains, PVC roll-up cover * A-sign * Tires: 385/65 R22.5 ----* Our opening hours * Monday - Friday: 08:00 - 17:00, Saturday: by appointment! * Outside of opening hours, we are available by appointment! * We speak: English, [other languages] * Other: Errors, prior sale and changes subject to confirmation Iodpfxjzy Tc Ae Aa Rotl * Leasing, financing, trade-in possible * All information without guarantee!

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch Itsdpey Umd Ssfx Aa Rel - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed valve: on the suction and pressure sides, including pressure reducer, solenoid valve, check and throttling valves Iedpfx Aaod Ey Rgs Rotl Other accessories: such as drain valve, pressure gauge, etc. Photo: similar design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming, and dry-run safe. The pump's flow rate is energy-efficiently controlled by a speed-controlled drive, depending on the delivery pressure, using a frequency converter. We also offer our piston diaphragm high-pressure pumps in a special design for tunnel construction. Do you have special requirements? Please ask us.

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz Itsdpfx Aaezy Dzij Rel - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions Itjdpfx Aew U U Svea Rjl

Condition: new, sheet width 2065 mm plate thickness 1.20 mm daylight opening 30.0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 500 kg dimensions of the machine ca. 2400 x 1115 x 1500 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece Isdpfoxaat Ijx Aa Rotl - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: used, maximum load weight: 34,310 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 12/2026, loading space volume: 55 m³, total length: 11,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2009, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Spitzer feed silo, 55 cm, 6 compartments, 6 dome lids (Vehicle 872) First registration: 06.02.2009 Type SF 27/55/4P ID 1532, manufactured 2009 -40/ +80 degrees Celsius 2.0 bar operating pressure Permissible gross vehicle weight 34,000/40,000 kg Unladen weight 5,690 kg Payload 28,040/33,040 kg Overall length 11,500 mm x overall width 2,550 mm x overall height 3,950 mm TÜV (technical inspection) valid until 12/2026 1 x LED reversing light 1 x LED work light front + center + 1 x on the passenger side at the rear 55 cbm capacity 6 compartments, 6 dome lids on top Air suspension with raising and lowering function Loosening device Itedpfszyzffjx Aa Rsl Pressure gauges Outlets / filling points on the outside and at the rear Next internal inspection 12/2027, next external inspection 02/2029 Storage box on the passenger side in front of the frame + plastic storage box on the passenger side in front 2 x 12-ton 2-speed gear winch Air suspension with start-stop function (red+black) 1st axle: lift axle with switch BPW drum brakes ALCOA light alloy rims, predominantly Tires 385/65R22.5, 1st approx. 80/90%, 2nd approx. 50/80%, 3rd approx. 80/90% 3rd axle: steering axle Rear view camera Folding access platform with walkway 4 x wheel chocks Hose compartment / storage compartment open on the driver's side Price: €17,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Cutting range examples: 90° round: 260 mm Itsdpfxeztva Do Aa Rel 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: new, Ideal for machining pipes, profiles, as well as solid materials made of stainless steel, iron, etc., suitable for commercial/industrial applications. Technical Data: Cutting capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable cutting speed for optimal adaptation to the workpiece - Hydraulic downfeed cylinder, steplessly adjustable - Quick-release vice for fast and easy workpiece clamping - Precision, adjustable saw blade guide for optimum cutting results - CE/IEC compliant, German documentation and service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vice - Material stop Itsdpfx Ajw Suxwoa Rol - Coolant system incl. pump - Hydraulic downfeed cylinder - Motor protection switch - Automatic shut-off after cutting - Machine base

Condition: new, Technical Specifications: Capacity: 200 t Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight (approx.): 2600 kg Equipment features: - Laterally adjustable cylinder via rack, pinion, and handwheel - Generously dimensioned working area - Height-adjustable table - Torsion-resistant welded steel construction - Pressure gauge Iedpfx Aaopl T Dio Rjtl - Fine pressure adjustment - Additional hand pump Your benefits: - Among the heaviest-duty models on the market - Available in capacities up to 500 tons - Maximum performance and stability - Various table widths available upon request - Horizontally freely positionable hydraulic cylinder with handwheel, rack, and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools Isdpfx Aaszz Adfj Rotl The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: used, Year of construction: 2009, CNC gantry plasma cutting machine Itjdpfx Aajzmv Dce Rjl Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2009 CNC control: Global Control Plus Track gauge: 4,000 mm 2 x plasma with Hypertherm HPR260 power source Travel length: 10 m 2 x oscillating conveying table Size: 3 x 3 m each without filter system 9926ä

Condition: used, Year of construction: 2005, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Ijdoykruaepfx Aa Rjtl Track gauge: 8,000 mm Equipment: 1 x Oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x Skew rotator with Kjellberg FineFocus 800 power source 3 x Oxy-fuel torches ALFA 1 x Marking unit FineMarker Without table, filter, and track 9926ä

Condition: new, Masoneilan Baker Hughes Control Valve DN/NPS 3" Class 300 – ATEX – Positioner High-quality Masoneilan control valve assembly, complete with pneumatic actuator, positioner/control system, pressure gauges, and accessories. The unit appears to be in unused/excellent condition and is supplied with original Baker Hughes documentation. Condition: Unused/surplus condition Itjdezz R Skepfx Aa Rjl Location: Rotterdam, The Netherlands Availability: Immediately available Worldwide shipping can be arranged. SURPLUS – Industrial Solutions From Surplus to Second Life

Condition: new, Year of construction: 2017, functionality: fully functional, 3 × Eaton BECO INTEGRA® PLATE 400 EC – Hermetically Sealed Sheet Filter Systems (2017, Unused) Factory new, never used in production – only FAT/SAT with water. CE marked, GMP & FDA compliant. Complete FAT and SAT documentation available. Immediately available, can be sold individually or as a package. Model & Configuration: - Hermetically sealed depth filtration system (filter press) with external chamber and circumferential profile gasket Itjdew Nikvopfx Aa Rol - Stainless steel design (AISI 316L / 1.4404, partly 1.4435), high-gloss polished product-contact surfaces - CIP & SIP capable, sterile setup with BIOCONNECT flanged connections (NEUMO) - Format: 377 × 400 mm sheets (0.12 m² per sheet) - Hydraulic closure mechanism with 4-stage control for cleaning, sterilization, filtration & opening Key Technical Data: - Max. operating pressure: 6 bar | Max. differential pressure: 4 bar - Operating temperature: up to 140°C | Sterilization: up to 134°C - Mobile frame design - Includes discharge frames and clear spacers Differences between the 3 units: - Unit 1: 4.80 m² filtration area, 9.60 L solids volume, 40 sheets, product-contact parts partly 1.4435, fittings & riser pipes supplied separately - Unit 2: 3.36 m² filtration area (expandable to 4.80 m²), 6.72 L solids volume, 28 sheets, also stainless steel design, expandable - Unit 3: Technically identical to unit 1 but with additional fittings & riser pipes pre-installed (GEMÜ diaphragm valves, sight glasses, pressure gauges) Application Areas: - Pharmaceutical and biotech production - Food & beverage industry - Applications with high hygiene and sterility requirements Price: Negotiable depending on configuration, individual or total package possible. Total price in 2017: €253,000 Delivery: Ex stock, worldwide shipping possible. Original documentation, FAT & SAT reports, drawings, and 3.1 certificates available.

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Iedpezz Hk Njfx Aa Rstl Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: new, Year of construction: 2009, Storage number: 100102162 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Undercarriage with 6m gauge, including central ballast Tower for 30m hook height Outreach 65m, including counterweight Tower system 256HC Cab Radio Itsdpfszz U Ebex Aa Rel ABB Central lubrication system 45 kW hoisting gear Price ex works Nuremberg

Condition: new, Year of construction: 2009, Storage number: 100102162 Itodpfx Aajz Ackze Rsl Transport dimensions (L x W x H): 0 x 0 x 0 ---- Undercarriage with 6m gauge, including central ballast Tower for 30m hook height Outreach 65m, including counterweight Tower system 256HC Cab Radio ABB Central lubrication system 45 kW hoisting gear Price ex works Nuremberg