Used Hutt Table Base for sale (22,472)

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Isdpoyvzkiefx An Noif Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Ijdjzhnlzopfx An Nsif Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: new, Year of construction: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on workbench top - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Usable lift: 610 mm - Maximum height: 1150 mm - Stable platform upper frame, 970 x 590 mm, located beneath the workbench top - Robust lifting scissor construction with finger guards - Total weight: approx. 160 kg - Steering castors: 2 with brake, 2 without brake - Wheel diameter: 125 mm - Each narrow side features 2 integrated support feet with rotating footplate and rubberized foot surface, allowing the lift table to be used as either a stationary or mobile work station - Powder-coated finish: base frame and platform frame in light grey RAL 7035, scissor elements in violet blue RAL 5000 * Includes widened foot lever for easy operation with the workbench top installed even when the lift table is fully lowered Iodpfx Asrr Twmsn Njif Product data — Workbench: Workbench made of solid beech (50 mm thick), load capacity 200 kg on the workbench Front vice approx. 520 x 70 mm Front and rear vices equipped with spindles ensuring highly precise and stable clamping jaw guidance Rear vice and workbench top equipped with holes for bench dogs Front edge of the workbench top is 130 mm high Workbench drawer runs along the entire rear length for tool storage, includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of bench top: 130 mm high Weight of workbench top: approx. 90 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 Ijdpfx Anoylt Uko Nsif - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Iiodpfx Asw Nylksn Njf Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: excellent (used), Catalogue number 7956 Iedpfjztanrex An Noif TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Year of construction: 1982, condition: used, machine/vehicle number: 391; Lg-Nr. 13100, Technical specifications: - Load capacity 2000 kg - Max. load capacity, horizontal 3500 kp - Turntable diameter 1750 x 1750 mm - Turntable extensions - Turntable can be swivelled via geared motor 0 - 90° - Rotational speed, electrically adjustable in a stepless manner: 0.2 - 1.5 m/min - Right-hand/left-hand rotation - Welding current transmission 1200 A - Power supply 400 V - Table height in horizontal position with base frame approx. 2070 mm Iiedpsbp Thhefx An Nof - Table height in horizontal position without base frame approx. 940 mm - Space required approx. W 1650 x H 1130 / 940 x D 2500 mm - Weight approx. 2.2 t

Condition: excellent (used), Here we offer you an FRT MicroSpy Mobile. Iisdpfx Anszdnqcj Nof Device designation: FRT MicroSpy Mobile, Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements to be performed "on-site" to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts. Excellent resolution values. Excellent reproducibility. Non-destructive measurement. Handles and adjustable support feet. Low weight (approx. 5 kg). FRT Technical Specifications: Device: MicroSpy Mobile xy-travel 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross-roller guide Drive: DC motor with ball screw Travel (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3 mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height variation (per axis): < 2 µm / 50 mm (of which not reproducible): < 0.5 µm Right angle XY: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel Position measuring system Measuring system resolution Axis wobble Coarse adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point distance xy: 1 µm Sample size: - Sample weight: - Min. measurement speed: 1 µm / sec Max. measurement speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring system: approx. 5 kg Footprint measuring system: approx. 0.3 x 0.3 m² Dimensions control unit (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, 16A Power supply US version: 110 - 240V, 50 - 60Hz, 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cable for cold devices 1 x Mouse (PS/2) 1 x Keyboard 1 x Monitor 19'' TFT Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), The WALTER WD 250/350 twin-spindle multi-blade saw is equipped with two independent spindles with power ratings of 30 kW and 37 kW. The machine is in perfect technical and visual condition, fully functional, and ready for immediate operation without any additional financial investment. Its robust construction and powerful drive units guarantee high performance, cutting precision, and reliability during multi-shift operation. The WD 250/350 model is designed for longitudinal cutting of solid wood and wood-based materials. Thanks to the use of two saw arbors and an advanced feed system, it ensures stable material guidance and high quality of the processed components. TECHNICAL DATA: * Manufacturer: WALTER * Model: WD 250/350 * Type: Twin-spindle multi-blade saw Processing parameters: * Maximum cutting height: 170 mm * Maximum cutting width: 350 mm * Diameter of saw blades: 300 mm * Spindle diameter: 2 × 70 mm Drives: * Lower spindle motor: 30 kW * Upper spindle motor: 37 kW * Feed motor: 1.5 kW Feed system: * 7 lower pull rollers * 2 upper toothed pull rollers * Length of infeed table: 3000 mm Chip extraction: * Extraction nozzles: 2 × 200 mm Isdezru Azspfx An Neif MACHINE DIMENSIONS: * Length: 3200 mm * Width: 2000 mm * Height: 2000 mm * Weight: 2000 kg Machine advantages: * Very good, excellent technical condition * Powerful 30 kW and 37 kW motors * Stable, heavy-duty industrial construction * High production capacity * Precise material guidance * Advanced feed system ensuring smooth operation * Ready for immediate start-up * Excellent for sawmills and wooden component manufacturing plants The machine has been regularly serviced and maintained in very good technical condition. It is ready for immediate use.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Iodpfx Anozhn Rqs Neif Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine Iiodpfx Aneyzhbfe Nof -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor- right side -mist collector interface

Condition: good (used), Year of construction: 2010, 2010 Kardex Remstar Shuttle XP500 Automated Storage Carousel. 2,780mm x 3,074mm x 8,150mm. (Already Dismantled) Kardex Model: Shuttle-XP-500-2450X864. Type: H/N55/N22D18B/N75D13/20. (Approx 59) Steel Trays, (Approx 240) Plastic Tool Bins, Quantity of Dividers & (Approx 20) Machine Rollers. S/No. 10007599/001. Iiedpszty Dyofx An Nsf Please Note: This Carousel has been Professionally Dismantled & Flat Packed to Pallets by Kardex Remstar in March 2026 & ready for collection. Viewing Recommended.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs Iiedpfx Anjyzgp Ue Nsf - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. The machine is immediately available and located in Tre Ville (TN), Italy. Iijdpfjx Exl Nsx An Njf The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Detailed photos and further technical specifications are available upon request.

Condition: new, Year of construction: 2025, 3D hole table 2000 x 1000 x 200mm, 100mm grid, plate thickness 22mm, hole diameter 28mm, precision-machined, very solid, weight approx. 750 kg. Includes table base suitable for all standard accessories with 28mm. Price is without accessories, accessories as shown special price €250. Plasma nitriding €800 extra (impact-resistant, scratch-resistant, stainless). Shipping within Germany €250. Ijdpfx Aew H Abkjn Neif

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, nominal power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, feed length X-axis: 12,000 mm, feed length Y-axis: 420 mm, feed length Z-axis: 200 mm, cutting width (max.): 420 mm, cutting length (max.): 12,000 mm, table length: 13,000 mm, We offer this ready-to-use Weinmann WBZ150 woodworking machine, manufactured in 2004. Manufacturer: Weinmann Model: WBZ150 Year of manufacture: 2004 Condition: ready to use Category ID: 155 Type ID: 2716 Type: woodworking machine Used for processing beams and wooden structural elements – cutting, milling, drilling, and notching. The saw has new gearboxes, units, and a belt for the feeder. Technical data of the saw: Max. length of the workpiece (X-axis): 12,000 mm. Max. width of the workpiece (Y-axis): 420 mm. Iiedjy Uuviopfx An Nsf Max. thickness/height of the workpiece (Z-axis): 200 mm. Main spindle/circular saw: power ~ 7.5 kW with a vector drive (C-axis) Tool magazine: automatic tool changer with 12 positions. CNC control based on PC with Windows system; Length of the infeed and outfeed table: 13 m If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: Iisdpezuxp Refx An Nef 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Iiedjyyzxhopfx An Nof Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Iisdpfx Ansxua N Se Nsf Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: good (used), Year of construction: 2008, machine/vehicle number: 22410, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, number of axes: 4, THE MACHINE IS CURRENTLY READY FOR SHIPMENT ON A TRUCK TRAILER. WE CAN ARRANGE DELIVERY FOR €2.00/KM. THE BUYER IS RESPONSIBLE FOR ORGANIZING AND PERFORMING THE UNLOADING. IMA BIMA 300 CNC Machining Center Offered is a fully functional IMA BIMA 300, 4-axis CNC machining center in a console table design. Basic data (no guarantee of accuracy and completeness): Machining area: X-axis: approx. 5000 mm Y-axis: up to approx. 1400 mm Max. workpiece height or clamping height: approx. 125 mm Machine weight: approx. 6000 kg Main spindle: Power: 7.5 kW (S1) / 10 kW (S6) Tool holder: HSK F63 Speed range: up to 24,000 rpm Programmable clockwise/counterclockwise rotation Tool and machining units: Tool changer (disc changer) with approx. 18 magazine slots CNC-controlled C-axis (360° rotatable) Drilling unit: Vertical and horizontal drilling spindles Integrated nut saw Mount for various adapter units Table system / Clamping technology: Console table with approx. 6 adjustable support arms and several suction plates (vacuum clamping system) Two vacuum circuits, positionable depending on the workpiece External vacuum pump from Becker available (see images) Control and software: ICOS CNC control Programming via IMAWOP (dialog-oriented, graphical interface) PC-based control with network connection Additional equipment: Iiodpezq U Riefx An Njf Central lubrication of the linear guides Extraction connection (Ø 250 mm, approx. 4950 m³/h) Safety equipment according to CE with protective grilles and safety mats (some mats may have intermittent contact) Documentation and spare parts catalog incomplete Electrical data: Mains connection: 400/230 V, 50 Hz, 3N/PE We are available at any time to answer questions or arrange a viewing appointment.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders. Iodpfet Rhb Iex An Noif

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Iiedpfx Anoyv I Hwo Njf Including base bearings, 110mm diameter

Condition: new, Year of construction: 2025, Two tables are connected via a tandem system to achieve a combined load capacity of 5000 kg. Technical description with the following key data: Load capacity: 3000 kg static line load Iijdpjk E Hmtjfx An Nsf Useful stroke: 800 mm Overall height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earth, with 16 A CEE plug and 3-meter cable Motor: 2.2 kW, 1400 rpm Valve voltage: 24 V DC Protection rating: IP 54 generally, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Unit placement: integrated in the lifting table Control box: Dead man's control including 2 m cable Total weight: approx. 330 kg Tandem control for synchronized operation. Note: No guarantee can be given for 100% synchronous operation. Any height differences that may occur will be compensated for in the base position or upper position. The safety cut-out strips of the two lifting tables are NOT interlocked. Minimum distance: 500 mm between the lifting tables. Maximum distance: 3000 mm between the lifting tables. Self-supporting base frame with 4 flanged wheels, into which the lifting table is installed. 4 ball-bearing flanged wheels, wheel diameter 150/175, heavy-duty design for maximum load, made of turned steel C45. Overall height: + approx. 50 mm.

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Iodpfx Asrtrzajn Nsif Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Iiodpfxezf E E He An Nof Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining.