Used Ilpro Technology I80Gf-C for sale (69,369)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Isdszzplcopfx Am Dobc Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: new, Year of construction: 2023, load capacity: 4,000 kg, lifting height: 5,610 mm, total length: 2,550 mm, Spurbreite vorn 1980mm Breite zwischen den Radarmen 1400mm Lastschwerpunkt 450mm 600mm 600mm Überhang vorne 245mm Radstand 1565mm 1915mm 2115mm Überhang hinten 140mm Nennverlustmaß bis Gabelrücken 1100mm 1100mm 1150mm Anfahrwinkel max. 45° Rampenwinkel max. 29° Abfahrwinkel max. 45° Mastneigung nach vorn 3° Mastneigung nach hinten 5° Wenderadius min. 1950mm 2260mm 2490mm Plattformhöhe 545mm Plattformbreite 850mm 1200mm 1350mm Fahrgeschwindigkeit max. 15 km/h Steigfähigkeit 15% V2003 T Kubota Diesel / 3 ltr. GM LPG 44KW / 48KW Fahrzeugelektrik 12 Volt Ibodpfxozzrr Se Am Djc Gabelzinkenabmessung 50x150x850mm 50x150x1200mm 50x150x1350mm Bereifung vorne OD 450mm/Width 200mm

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134335N324, used, in good condition, 100% functional, delivery as per photos Iedjz Act Njpfx Am Debc

Condition: ready for operation (used), Siemens 6SN1123-1AB00-0BA0 Simodrive LT-Modul INT. 2X25A Isdpfxsz Aldqe Am Dobc

Condition: used, empty load weight: 6,890 kg, maximum load weight: 5,110 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/2005, loading space length: 7,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 40 m³, suspension: air, color: white, Year of construction: 2005, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, * German trailer * First owner * Condition: see photos * 2-axle Schmitz tandem trailer, type ZK018 * Body: Refrigerated box with CARRIER underfloor refrigeration unit, type SUPRA 950U * Deep-freeze unit with a cooling capacity from 0°C to -20°C * Standby and on-the-road cooling via diesel and electric drive * Loading area dimensions: Length 7,500 mm x Width 2,450 mm x Height 2,200 mm * Front roller shutter door for drive-through loading * Multiple anchor rails on the right, left, and top Ibjdpfx Amszrnpzs Djc * Rear roller shutter door * Loading platform BÄR, type BC 1500S * Load capacity 1,500 kg * 3 support legs * Schmitz axles * Air suspension * ABS + EBS * Storage compartments * Gross vehicle weight (GVW) 12,000 kg * Unladen weight 6,890 kg * Payload 5,110 kg * Load volume 40 m³ If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety report), or a new UVV (accident prevention regulations) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after making an appointment. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Year of construction: 2010, operating hours: 1,000 h, condition: ready for operation (used), travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 250 mm, overall weight: 2,000 kg, number of axes: 4, This 4-axis SCM TECH Z2-27-C wood boring machine was manufactured in 2010. It features a maximum workpiece height of 160 mm, length of 2700 mm, and width of 1300 mm. The machine includes a routing spindle and a horizontal boring unit, ensuring versatility in operations. If you are looking to get high-quality wood processing capabilities, consider the SCM TECH Z2-27-C machine we have for sale. Contact us for further details. • Electrical: 400 V, 3 + N, 33 A, 50 Hz, breaking capacity 10 kA • Control: Xilog Plus • Machining units: saw unit (included), horizontal boring unit (included), routing spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (double posts) 1210 mm • Max travel speed: 60 m/min • Clamping system: pneumatic locking bars; number of clamping bars: 6 Ijdpfjzug A Esx Am Debc • Suction cup sizes: 120x120 mm and 55x120 mm • Machine on: 5.500 h

Condition: used, mileage: 129,119 km, power: 107 kW (145.48 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 2,960 kg, maximum load weight: 2,640 kg, overall weight: 5,600 kg, axle configuration: 4x4, wheelbase: 2,300 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,050 mm, loading space width: 1,500 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, cruise control, differential lock, immobilizer system, onboard computer, power assisted steering, trailer coupling, * German vehicle * Only 5,036 operating hours * Condition, see photos * Previously owned by a municipal authority * 4x4 all-wheel drive, switchable * Body: three-sided tipper * Loading area: length = 2,050 mm x width = 1,500 mm x height = 400 mm * Steel floor with aluminum loading flaps * DIN lashing eyes * Municipal plate/work surface, hydraulically adjustable with electric and hydraulic connections * 2 x trailer coupling * Trailer load: 3,500 kg * Additional side hydraulics on the left * Comfort cab with 2 seats * Cruise control * Crawl speed * Manual transmission, 5 gears * Roof spotlights * Heated windshield * Working speed control * Radio CD * Heated mirrors * Comfort driver's suspension seat * Rotating warning lights * Wheelbase: 2,400 mm * GVWR: 5,600 kg * Unladen weight: 2,960 kg * Payload: 2,640 kg * In the event of a sale to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors. Ibodpozv Uhxsfx Am Doc

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm Iodszf Nn Sopfx Am Dobc max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Iedpsyxl Epefx Am Dobc Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: excellent (used), lifting height: 22,000 mm, Year of construction: 2022, operating hours: 2,329 h, Empty weight: 4.700 kg Lifting capacity: 3.990 kg Dimensions of cargo space: 430 x 80 x 193 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: NL Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C10 * 2022 * Diesel and 400 Volt drive * 2,329 Operating hours * Fly jib * Hoisting winch max 4,000 kg * Non-marking tracks * Remote control * 22 meter hook height * 19.8 meter horizontal reach * Unlimited swing rotation * Recently replaced slewing ring * 3,990 kg lifting capacity * 4,700 kg dead weight Ibodpfx Amozlha Ts Dec

Condition: used, total length: 2,770 mm, lifting height: 1,800 mm, Warehouse technology Still Kanvan 05 Drive Electric Isdozlk Rnjpfx Am Dsbc Lifting height (mm) 1,800

Condition: used, mileage: 470,469 km, power: 162 kW (220.26 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 7,150 kg, maximum load weight: 5,590 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,550 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, cooling unit, cruise control, differential lock, electronic stability program (ESP), onboard computer, power assisted steering, seat heater, soot filter, tail-lift, * German vehicle * 1st hand * Type: 1500KL * Extra long refrigerated box 8.20 meters with 2 chambers * Covers all temperature ranges from -20°C to +30°C * Carrier Viento 300 refrigeration unit * Deep-freeze chamber: L=8,200 x W=850 x H=2,250 mm * Fresh food compartment: L=8,200 x W=1,550 x H=2,250 mm * 16 pallet spaces * Automatic gearbox * Air conditioning * Hill start assist * Heated seats * Cruise control * Electric windows * Comfort driver's seat, air suspension * Roof hatch * Suspension: leaf/air with lifting and lowering Ibedpfovhqigsx Am Dsc * Anti-lock braking system (ABS) * Aluminum floor * Sun visor * 200 liter fuel tank * Body lighting * Roof spoiler * Heated electric mirrors * Load securing system for locking bars * Engine brake * Palfinger tail lift * Roll-off protection * Foot switch * Wheelbase: 5,550 mm * Load capacity: 1,500 kg * Max. gross vehicle weight: 11,990 kg * Payload: 5,590 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Ibjdpfex Exmtox Am Djc Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration Iedpfx Amexbtvfs Dobc - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Iedpfx Aexzg Ubjm Djbc Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, Year of construction: 2017, total length: 2,100 mm, Warehouse technology Ibsdpfxjya Ixae Am Djc Kärcher KM130/300RLPG Drive Gas Year built 2017

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS 5-axis – year of manufacture 2003 – fully functional – ideal as a complete spare/donor machine. The machine is currently operational and can be inspected while running. Due to its age, various original parts are no longer available from Schüco. Therefore, the machine is being sold at any reasonable offer. Preferably sold as a complete unit; the buyer is responsible for disassembly and transport. TECHNICAL DETAILS X-axis: 6,650 mm Y-axis: 800 mm Z-axis: 500 mm X-axis feed rate: 0-40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0-30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: from 0-90° continuously C-axis rotation: from 0-360° continuously Rotation speed of B- and C-axes: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Ijdexr N Rmjpfx Am Djbc Positioning accuracy over a length of 6,000 mm: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling: Ø 300 mm Maximum spindle motor power: 7 kW Spindle motor power for disc milling: 7 kW Spindle motor speed: 0-30,000 rpm Tool change time: < 15 s (from clamping to clamping) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 Total machine weight: 6.5 tons WORKING AREA Number of clamping blocks: 8 pcs Positioning of the clamping blocks: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets Ijdpfx Amsvcb U Ae Dobc - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climate Testing Chamber, -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated current: 22 A Iodpfeuuif Njx Am Dsbc Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of manufacture: 2002 TK-11 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Vötsch VC 0150 Climate Test Chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climate test chamber Voltage: 230 V Rated power: 1.5 kW Volume: 1540 liters Temperature range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor controller List price: €19,500 KK-09 Ibodpfjuuikfex Am Doc You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: K731711, type of input current: three-phase, overall weight: 2,140 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 36 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (+-5%) to secondary 400V with power 630 KVA Ibjdpsx Sphbjfx Am Doc

Condition: used, axle configuration: 2 axles, first registration: 04/1973, color: other, Year of construction: 1973, Empty weight: 3.200 kg Axle 1: left 12 12 mm right 12 12 mm Axle 2: left 12 12 mm right 12 12 mm Ibedpeyf Evmjfx Am Djc Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2011, Immaculate Fanuc packaging robot with controller which has come from a factory which closed a few years ago. The nicest robot we have had for a long time, very well looked after. Iodpfxohn Szqo Am Debc

Condition: as good as new (ex-display), rotating center Manufacturer: Bulmak Type: C 400 TS Height: 160 mm Height from clamping surface to center of rotating center: 160 mm Maximum shaft diameter: 110 mm Weight: 14 kg Iedpfsf I Smzsx Am Djbc

Condition: new, Year of construction: 2027, Recirculating air chamber oven, electric, new unit, delivery time 17-18 weeks -Temperature 300°C -Internal dimensions W x D x H: 1500 x 3000 x 2000 mm -External dimensions W x D x H: 2410 x 3560 x 2730 mm -Volume: 9000 liters -Control system: Eurotherm Nanodac, 100 programs with 25 segments each -Additional 100 programs can be saved/loaded via FTP or a USB flash drive -2 recirculating air fans -Double door with safety door sensors -Over-temperature protection, Eurotherm 3216i -Control system/recorder with color touch display -Stable steel construction, anthracite exterior -Motorized dampers -Electrical version: 400 V / 50 Hz / 3NPE -Increased heating capacity: approx. 70 kW -Guide rails, recess for driving in a trolley Ibedjlkb Ezepfx Am Dsc -Documentation, CE declaration of conformity -Electrical wiring diagram with spare parts list We will gladly offer transport, installation, and training for your employees. As a new unit, it is also available with an exhaust fan and other equipment! Delivery time approx. 10-12 weeks. Please contact us! We offer new and used industrial ovens, which we can also modify and supplement according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculating air oven, chamber oven, heating oven, chamber recirculating air oven, annealing oven, tempering oven.