Used Industrial Pump for sale (36,350)

Condition: used, Wilo DL-E 100/145-11/2-S1 Dry-running Twin Pump Dry-running twin pump in an inline design for pipe installation or base mounting, with an integrated frequency converter for electronic control, among other things, for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic performance adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual control mode Setting of the differential pressure setpoint Setting of the speed (manual control mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Psdpfx Abswbqrteusgu Error acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 2–10 V, 4–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0–10 V for actual value signal of the pressure sensor Analog input 2–10 V, 0-20 mA, 4–20 mA for actual value signal of the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access lock Twin pump management (twin pump or 2 x single pump) Main/standby operation (automatic fault switchover) Main/standby operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on/off) Your advantages Energy savings thanks to integrated electronic performance adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/standby operation and parallel operation Configurable error behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Power connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power input P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Immunity to interference EN 61800-3 Insulation class: F Motor protection: IP55 Motor protection: FMP integrated Installation dimensions Installation length L0: 500 mm Suction-side pipe connection DNs: DN 100 Discharge-side pipe connection DNd: DN 100 RRP: 29,006.25 € More items, new and used - find them in our shop! International shipping costs on request!

Condition: new, Spandau screw spindle pump, 6.3 kW Power: 6.3 kW Voltage: 400/690 V Frequency: 50 Hz Flow rate: Qmax: 55 l/min Speed: 3525 rpm Max. immersion depth: 262 mm Podjrklfyjpfx Abuegu More pumps, new and used – find them in our shop! International shipping costs available upon request!

Condition: used, Debus DDS 118: High-performance industrial compressed air chip extractor This specialized machine was designed specifically for the efficient extraction of metal chips and adhering liquids (such as emulsions or oils) directly at machine tools. • Filter container with tangential suction nozzle and integrated cyclone pre-separator • Stainless steel wire mesh serves as the filter for separating liquid particles • Easy emptying via a detachable collection container including an inserted chip basket • Chip basket with integrated float device • Robust construction made of plastic-coated steel for long-term operation • Good handling due to smooth-running rollers - Manufacturer: Debus - Model: DDS 118 - Operating pressure: 4.6 m³/min Pjdpfjivd A Uox Abuogu - Air requirement: approx. 40 liters - Weight: 55 cm long, 60 cm wide, 150 cm high - Year of manufacture: 2016 - New price (approx.): €4,604.00 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Wilo dry-running pump IPN50/180-7.5/2 AT, DN50 PN 16, Art. 307833 /2120882 - Wilo dry-running pump - IPN50/180-7.5/2 AT - DN50 PN 16 - 7.5 kW - max. 140°C - 2900 rpm - Art. 307833 /2120882 The data listed below is identical to that of our previous model. Ordering information Manufacturer: Wilo Product designation: CronoLine-IL 50/180-7.5/2 Net weight approx. 106 kg Article number: 2120882 Operating data Fluid conveyed: Water Fluid temperature T: -20 °C Ambient temperature T: -15 °C Maximum operating pressure PN: 16 bar Design note: 16 bar up to 120°C, 13 bar up to 140°C Minimum Efficiency Index (MEI): 0.4 Hydraulic data Pgsdpsivdz Njfx Abusu Minimum Efficiency Index (MEI): 0.4 Max. operating pressure p: 16 bar Maximum operating pressure PN: 16 bar Min. fluid temperature Tmin: -20 °C Max. fluid temperature Tmax: 140 °C Max. ambient temperature Tmax: 40 °C Design note: 16 bar up to 120°C, 13 bar up to 140°C Motor data Mains connection: 3~400 V, 50 Hz Voltage tolerance: ±10% Motor efficiency class: IE3 Motor rated power P2: 7.50 kW Rated current IN: 13.30 A Rated speed n: 2900 1/min Power factor cos φ: 0.90 Motor efficiency ηM at 50% load: 88.9% Motor efficiency ηM at 75% load: 90.3% Motor efficiency ηM at 100% load: 90.1% Motor winding up to 3 kW: - Motor winding from 4 kW: - Insulation class: F Motor protection: IP55 Motor protection: no Materials Pump housing: 5.1301/EN-GJL-250, KTL-coated Impeller: EN-GJL-200 (GG-20) cast iron Shaft: stainless steel Mechanical seal: AQ1EGG Lantern: 5.1301/EN-GJL-250, KTL-coated Condition: "New". Pumps from stock. Some may be without the original packaging. May have dirt or storage marks/minor dents. They appear unused when looking at the drill holes. There are no mounting marks. See pictures. Shipping via special/parcel/freight transport. P4 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, ARO PD30A-BSS-STT-C Stainless Steel Double Diaphragm Pump The ARO metallic 3" diaphragm pump models achieve flow rates of up to 1041 L/min and are available in a variety of materials. These pumps are often used in industry for transfer, filling, and circulation applications. EXP series diaphragm pumps stand out due to their best overall operating costs and offer an optimal solution with regard to energy efficiency and downtime. Example media* for PD30A-BSS-STT-C: Highly flammable liquids, mineral oils, paints, solvents, acids, alkalis, detergents, wastewater, and more. Suction and discharge connection: 3" BSP Max. flow rate: 1041 L/min. Max. operating pressure: 8.3 bar ATEX certified: Yes Material, media side: Stainless steel Material, air motor: Aluminum Material, diaphragm: PTFE / Santoprene Material, ball: PTFE Material, ball seat: Stainless steel Max. solid particle size: 9.5 mm Air connection: 3/4" NPT Weight: 103.8 kg Psdpfx Abjp U T I Houjgu Manufacturer's price: €20,976.13 You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, For sale: 1 used ABB ACS880 high-power industrial frequency converter, removed from an industrial installation. Technical specifications: * Manufacturer: ABB * Series: ACS880 * Model: ACS880-104-0600A-7+E205+V112 * Rated output current: 600 A * Output voltage: 525–690 V AC * Rated apparent power: 717 kVA * Cooling: Air-cooled * Condition: Used * Quantity: 1 unit Scope of supply: ABB frequency drive only. Electrical cabinet, external wiring, and other installation components are not included. Additional information: * Available from stock * Location: Rotterdam, Netherlands * Inspection possible by appointment * Sold in its current condition * EXW Rotterdam Pgodpfx Aoz S Rhfjbuju Please contact us for further information.

Condition: used, mileage: 76,850 km, power: 184 kW (250.17 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, electric window regulation, fog lights, power assisted steering, power mirror, = Additional options and accessories = - Beacon(s) - Disc brakes - Immobilizer - PTO - Radio - Radio CD player Pgsdpfszyud Iex Abuou - Toolbox = Remarks = MAN TGL 12,250m 2018, 78650 km, Euro 6, 11990 kg total weight, Bar O Clean stainless steel construction, 2x High-pressure pump (Pratissoli KT22 & Pratissoli KT30), Water boiler, Vacuum pump Jurop DL250, Radio controlled = More information = Year of construction: 2018 Front axle: Steering Rear axle: Double wheels GVW: 11.990 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Kuka robot KR 16 R1610-2 / SEL KRC 4 industrial robot Without cable Without panel Pgodpfx Aj Adzghebueu

Year of construction: 2026, condition: used, New demonstration machine!! This compressor offers a 100% duty cycle and is designed for high-pressure applications as well as extreme conditions. It is particularly suitable for expanding existing compressed air systems and can withstand even the highest working pressure continuously. Equipped with a direct-drive, single-stage, 2-cylinder industrial unit, it features a special relief valve (from 5.5 kW) and a star-delta switch directly on the console (from 5.5 kW). The air outlet is via a 2-meter hose with a 1/2" internal thread connection. Maintenance is easy thanks to easily accessible parts and long maintenance intervals. A soundproofing cover, an oil level switch, and a controlled relief valve can be optionally retrofitted. Technical data: Intake capacity 1146 l/min, Delivery capacity 702 l/min, Max. pressure 10 bar, Cylinders/stages 2/1, Voltage 400 V/3/50 Hz, Motor power 5.5 kW, Speed 1400 rpm, Sound pressure level 80 dB(A), optionally soundproofed 68 dB(A), Dimensions (W x D x H) 1073 x 693 x 721 mm, Air outlet G 1/2" internal thread, Weight 101 kg, Stationary piston on console. Piston compressor for applications up to 10 bar. Smooth-running, direct-drive, 2-cylinder industrial unit with single-stage compression, suitable for many applications in the industrial sector. Applications: Expansion of compressed air systems; operation in combination with screw compressors. Highest quality of components used. Complete equipment: Pressure switch, start-up relief, motor protection, safety and check valve; YD switch. Location: Rieth. Pgodpfx Aj Adu Npjbuju

Condition: excellent (used), mileage: 702,000 km, power: 338 kW (459.55 HP), first registration: 11/2003, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel, total length: 8,300 mm, total width: 2,500 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, electric window regulation, retarder, = Additional Options and Accessories = - Leaf spring suspension Pedpe Adudysfx Abusgu - Sleeper cab - Power Take-Off (PTO) - Power Take-Off (PTO) = Further Information = Year of manufacture: 2003 Suspension: Leaf spring suspension Front axle: Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle 1: Double tires; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30% Rear axle 2: Double tires; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30% Number of cylinders: 6 GVWR: 33,000 kg Technical condition: good Optical condition: very good

Condition: excellent (used), mileage: 770,076 km, power: 265 kW (360.30 HP), first registration: 06/2010, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,450 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,220 mm, total width: 2,530 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, XLEG6X20005235679 = More information = General information Year of construction: 2010 Cab: single Registration number: BX-PT-28 Technical information Number of cylinders: 6 Pjdpfeyycfpsx Abuogu Engine capacity: 12.740 cc Axle configuration Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg Weights Empty weight: 11.760 kg Carrying capacity: 16.340 kg GVW: 28.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), Year of construction: 2023, operating hours: 6 h, KUKA KR 1000 titan F Technical data: Manufacturer: KUKA Model: KR 1000 titan F Kinematics: Year of manufacture 2023 Controller: KUKA KR C4, Year of manufacture 2015 Payload: 1,000 kg Maximum reach: 3,202 mm Number of axes: 6 Repeatability: ±0.1 mm Robot weight: approx. 4,690 kg Mounting: Floor mounting The system consists of a KUKA KR 1000 titan F from 2023 and a KUKA KR C4 controller from 2015. Immediately after the acquisition of the new kinematics in 2023, the KUKA KR C4 controller was adapted to the KR 1000 titan F by updating and configuring the controller software. The integration and subsequent commissioning of the complete system were carried out by an official KUKA system integrator. Operating hours: Kinematics (2023): Approx. 5.75 actual operating hours, measured based on the travel time with the brakes released. KR C4 controller (2015): According to the available information, less than 100 operating hours before the software-side adjustment in 2023. The kinematics were used exclusively for testing purposes and have only moved loads of approximately 30 kg. Psdpe Ad I Urjfx Abuogu Both components have never been used under regular production conditions. The complete system is fully functional and ready for operation. Equipment and scope of delivery KUKA KR 1000 titan F kinematics KUKA KR C4 controller KUKA smartPAD All necessary connection cables Operating software and existing software packages Stäubli automatic tool changer, designed for 1,500 kg 4 components on the robot side and 4 on the tool side Technical documentation, operating manuals and CE documentation Inspection and transport An inspection, including a functional demonstration, is possible after prior arrangement. The system is already in transport position and ready for collection. Loading onto a truck can be organized on site. If you have any questions or require further information, please do not hesitate to contact us. An inspection can be arranged at any time here in Bremen. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the pictures shown. The technology and wear and tear of the offered items correspond to their age. Used machines are sold exclusively to commercial customers and without guarantee.

Condition: excellent (used), mileage: 529,134 km, power: 221 kW (300.48 HP), first registration: 09/1999, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,500 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Open roof - Rear suspension: Leaf - Sper - Thick Axles = More information = Year of construction: 1999 Tyre profile: 50% Brakes: drum brakes Psdps Ad Ipvofx Abuogu Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: used, Mitsubishi Type: Melfa RV-3SB Industrial 6-axis articulated arm robot 6-axis articulated arm robot RV-3SB Maximum payload: 3.5 kg Weight: 38 kg Robot controller CR2B-574-S312 Teach pendant R46TB with color/touch display Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone. Pgodpfszd T Uasx Abusu

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air intake High leak tightness (suitable for 4He) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Pressure side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Psdjzgbvqopfx Abuegu Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, SINGLE Industrial Chiller / Water Cooler / Chiller SINGLE SKA-10-W/STK Cooling capacity 14.0 kW according to the nameplate Year of manufacture 2016 – Industrial chiller with touchscreen control Refrigerant converted to R452A For sale is a used industrial chiller from the manufacturer SINGLE Temperiertechnik GmbH, model SKA-10-W/STK. The chiller is suitable for cooling industrial equipment, machines, production systems, and process circuits. The unit features an integrated controller with a touchscreen interface. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: SKA-10-W/STK Type of equipment: Industrial chiller / Chiller Year of manufacture: 2016 Country of manufacture: Germany Cooling capacity according to the original nameplate: 14.0 kW Permissible temperature range TS according to the nameplate: -30 °C to +20 °C Refrigerant circuit: Current refrigerant according to specifications: R452A Original refrigerant: R507 Original filling quantity according to nameplate: 13.0 kg Current filling quantity after conversion: not confirmed The refrigeration system was converted to the refrigerant R452A. The original refrigerant specifications on the nameplate refer to the delivery condition with R507. The current filling quantity and the CO₂ equivalent must be confirmed separately after the conversion. Pressure specifications according to the original nameplate: Max. operating overpressure PS: 24 bar Setting pressure safety valve: 28 bar Test pressure PT: 27 bar Electrical data: Power connection: 400 V / 3~ / PE / 50 Hz Rated current: 41.7 A Apparent power: 28.8 kVA Control / Operation: Touchscreen interface Display for three temperature control circuits (TCU 1–3) Display of process and temperature data Setpoint and actual value display Supply and return temperature display Flow display Modbus configuration menu Profibus status displays Alarm and operating status display Equipment: Industrial chiller with refrigeration circuit Integrated touchscreen control Electrical main switch Hydraulic connection lines and pipe connections Overflow connection Drain connection with shut-off valve Housing with ventilation openings Closed industrial housing Castors Equipment as shown in the pictures Areas of application: Industrial cooling Process cooling Machine cooling Production systems Machine tools Plastics processing Test bench cooling Temperature control and cooling circuits General industrial cooling applications Dimensions / Transport: Dimensions (L × W × H): not yet determined Unladen weight according to the nameplate: 1,020 kg The exact external dimensions must be determined before shipment. The actual transport weight may vary depending on residual media, accessories, and packaging. Condition: Psdpfj Aay H Sjx Abuogu Used Year of manufacture 2016 Refrigerant converted to R452A Optical condition as shown in the pictures Signs of use and some deposits on the connections. Scope of delivery: 1 × SINGLE SKA-10-W/STK industrial chiller Integrated touchscreen control Connections and equipment as shown in the pictures Scope of delivery otherwise as shown in the pictures. Shipping by freight forwarder possible upon request. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, 3DGENCE Type: Industry F420 Pjdszg Tzljpfx Abuogu Year of manufacture: 2021 Technical data: Working volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with a cleaning system Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with an automatic exchange system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Weight: approx. 350 kg Condition: used Scope of supply: (See images) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic exchange system Print head temperature (max.): 500°C Pgjdpfxjzix Ayo Abuju Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (See pictures) Weight: 350 kg (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have by phone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Psdpfx Aozix Nmjbusgu Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Julabo Type: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Top condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a powerful industrial cooling unit for laboratory, testing, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been professionally inspected, and is in very good, clean condition. All functions are working, and the display and controls operate perfectly. Typical applications: Machine and process cooling Laboratory and testing technology Plastic, laser, or system cooling Highlights: Robust industrial design Digital temperature display External control (RS232) Alarm connection Wheels for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Year of manufacture: 2018 (according to nameplate) Refrigeration technology: Refrigerant: R452A Filling quantity: 1.625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer's specifications): Temperature range: -20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on operating conditions): approx. 1.3 kW at -20 °C approx. 5.5 kW at 0 °C approx. 7.4 kW at +20 °C Connections & equipment: Inlet and outlet (industrial connections) Manometer Shut-off valve RS232 interface Alarm contact (max. 30 V / 1 A) Wheeled chassis Electrical data: Supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.) Dimensions (H x W x D): approx. 1050 x 550 x 750 mm Weight: approx. 150–170 kg Shipping & delivery: Condition: used Scope of delivery: Julabo FLW7006 recirculating chiller Pedpfxozix D Do Abujgu Connection cable Shipping method: Freight shipping on a pallet (upon agreement, shipping costs depend on the destination) Pickup: possible by appointment. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, KUKA KUKA KR 180 R2500 extra industrial robot + KRC4 controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and operator panel. The system was used in an industrial environment and is fully functional. It is ideally suited for automation, handling, welding applications, and general production processes. Technical data robot: Payload: 180 kg Reach: approx. 2496 mm Axes: 6 Weight: approx. 1059 kg Technical data controller (KRC4): Supply voltage: 3 x 400 V Pgodpfx Aboy Dn Siouou Frequency: 50/60 Hz Full load current: approx. 20 A Fuse rating: 25 A Weight: approx. 151 kg Dimensions (approx.): Robot height: approx. 2200 – 2500 mm Footprint: approx. 1000 x 1000 mm Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: KRC version: V8.2.22 HMI version: 8.2.0.4 B142 Basic system: KS V8.2.142 Windows version: XPe V3.0.2 Additional axes: 1 Equipment: KUKA KRC4 controller KUKA teach pendant (operator panel) Connection cables and wires Industrial design for continuous operation Condition: Used, technically functional, with typical signs of wear. The system was in operation until recently. Scope of supply: KUKA KR 180 R2500 extra robot KUKA KRC4 controller KUKA operator panel (teach pendant) Connection cables / wires as shown in the pictures Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2014, overall weight: 580 kg, load capacity: 80 kg, input voltage: 400 V, type of input current: three-phase, We are offering this used Jaskawa Motoman MS80W industrial robot, manufactured in 2014. Pgsdpfezra R Djx Abusu Model: MOTOMAN-MS80W Type: YRMS0080W-B00 Date: 2014.01 Payload: 80 kg Weight: 580 kg Serial number: S30057-1-2 Order number: S30057-1-2 Maximum pneumatic pressure: 490 kPa Supply voltage: 400 V Number of phases: 3-phase Frequency: 50/60 Hz Average power consumption: 4.0 kVA If you have any questions or require further information, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Robot complete with accessories Pgsdpj Afi Ucefx Abueu

Condition: used, input voltage: 380 V, Heavy-duty metal frame Pedpfx Ae Aaq H Asbujgu Motorized, liftable head Large metal whisk with thick wires Removable bowl Bowl capacity: 500L Integrated control panel Push-button controls Digital display Large circular metal housing Voltage: 380V Used industrial mixer with liftable head This used industrial mixer is designed for mixing and whipping operations in bakeries, pastry shops, and food production laboratories. Its large design features a metal frame, a motorized liftable head, and a large-volume metal whisk. This configuration allows for working with different preparations using a tool suitable for whipping and aeration operations. Why this model stands out This professional mixer is characterized by its liftable upper head, which facilitates access to the mixing tool and frees up the space needed to position a suitable bowl. Its large metal whisk is a particularly useful piece of equipment for preparations requiring a whipping action. The robust frame and integrated control panel demonstrate a design intended for a professional production environment. The visible push buttons and digital display indicate a control interface that is directly accessible to the operator. Unlike a dough mixer specializing in dough processing, this type of mixer is primarily intended for mixing, whipping, and aeration operations. However, the exact working possibilities depend on the motor and the compatible tools. Key advantages Industrial design suitable for food production environments Liftable head for easy access to the tool and bowl placement Large metal whisk visible on the equipment Configuration designed to accommodate a suitable removable bowl Heavy-duty metal frame providing a stable working structure Control panel with push buttons and digital display Possibility of complementing existing equipment with a compatible bowl Used solution for professionals looking for an old industrial mixer

Condition: used, Used pallet racking systems from SSI Schäfer are among the most popular solutions for efficient and safe storage. This heavy-duty racking system is ideal for warehouses, industrial facilities, and logistics operations that require stable and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing goods with a high weight. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new construction, renovation, or expansion of your existing racking system. Individually adaptable: The racking frames (Type P120) can be adapted to your desired height – precisely and professionally in our workshop. We provide customized racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3000 / 3500 kg (depending on the model) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam color: Blue Pgjdpfxo Aggm Uo Abueu - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 45 incl. floor spaces - Model: Used SSI Schäfer PR600 - Availability: immediately available from stock, multiple units available SCOPE OF DELIVERY: - 06 × Frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × Beams approx. 270 cm (INP100 or CE110) - 40 × Locking pins Price: €1340.00 Net €1594.60 Gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will be happy to create a non-binding offer for you – tailored to your individual requirements. Whether for new construction, renovation, or expansion – we will advise you competently on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive picture of our pallet racking systems, storage racking, and other solutions on-site. Many systems are set up and can be experienced directly. Our specialist consultants are available to answer your questions and provide individual advice – we look forward to your visit! Haven't found what you're looking for yet? Visit our website, where you will find a quick overview of many offers & variations of the products! ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You can find our telephone number on our company website. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.