Used Juaristi Ts1 for sale (220)

Condition: new, machine/vehicle number: dd98a7658922be8f2e25bcadb, empty load weight: 2 kg, maximum load weight: 8 kg, overall weight: 10 kg, axle configuration: 2 axles, tire size: 235/75 r 17,5, Further information Chassis central axle trailer low bed Fine-grained steel welded construction Telescopic front support leg Telescopic rear support 2 wheel chocks with holder Mudguards made of sheet steel over both wheels Towing device central axle trailer Bdjdsi Ri Ebspfx Al Ijb Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, TTS bridge Low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor Bridge length 4500 mmTub at the front and sides with Load-Lock profile for attaching tensioning straps (8 straps at the front, 12 straps on each side) Note: Slight floor undulation possible due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. 2 additional pairs of lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways with grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame RAL 3002 carmine red Hot-dip galvanized drive-on ramps Attention: Archive pictures!

Condition: good (used), Year of construction: 2013, Pallet rack, Hofe, frame height approx. 3.50m to 4m, beam length: 2.70m, - used - : Price (net) ex location: only 950 dismantled, packed and loaded: Manufacturer: Hofe Model: SL 25 / RTS 110 Year of manufacture: 2013 Frame height: approx. 3.50m to 4m Frame width: approx. 10cm Beam height: approx. 10cm Bodoxtbfropfx Al Isdb Frame bracing: bolted Frame depth: approx. 1.10m Number of frames: approx. 9 units Bay load: max. 1,600kg Shelf load: max. 1,440kg Bay width: 2.70m Beams: approx. 40 units Incl. push-through protections Condition: good Available: from approx. mid-November Location: Egelsbach area, Frankfurt region

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Bdsdpjwyu Uvjfx Al Iob Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (180 - 2000 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 90 - 1000 grams (depending on dough) Piston: 1 dough part piston (diameter 120 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm Bdodpfxswyvvbs Al Ijb - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (400 - 3300 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Piece weight: 200 - 1650 grams (depending on dough) Piston: 1 dough part piston (diameter 150 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Bodpfovw R Ihex Al Iedb Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Year of construction: 2009, condition: used, Ingersoll Rand TS1100W Air Dryer Manufacturer Ingersoll Rand (manufactured by Parker Hiross S.p.A, Italy) Type Refrigeration air dryer – industrial version Bdedoxggmnspfx Al Ijb Industrial applications • Air treatment for compressed air in pneumatic systems • Industrial applications requiring dry air: machining, painting, automation, etc. • Protection of equipment sensitive to humidity Main technical specifications: • Model: TS1100W • Serial number: 3733790002 • Cooling: water-cooled • Refrigerant: R407C • Maximum low-side pressure: 1.9 MPa (275 psi) • Maximum high-side pressure: 2.8 MPa (406 psi) • Circuit pressure: 2.6 MPa (378 psi) • Minimum/maximum air pressure: 4 bar / 14.5 bar • Maximum air temperature: 60°C • Ambient temperature: 5°C to 50°C • Power supply: 400 V – 3 Ph – 50 Hz • Power consumption: 15.6 kW / 27.8 A • Protection level: IP44 • Oil carryover: ≤ 0.01 mg/m³ (with suitable pre-filtration) • Approximate dimensions: 1,450 mm width • Approximate weight: ca. 650 kg • Year of manufacture: February 2009 🧩 Machine usage The Ingersoll Rand TS1100W industrial air dryer is designed to remove moisture from compressed air in production facilities. It protects pneumatic lines, automated equipment, and processes sensitive to humidity, ensuring the reliability and longevity of machinery. ⚙️ Features / Distinctions The TS1100W is distinguished by its water cooling, ideal for industrial environments with high thermal loads. It supports high operating pressures (up to 14.5 bar), and its R407C refrigerant meets modern environmental standards. The robust design allows for heavy-duty, continuous operation.

Condition: used, Description: Temperature test chamber Manufacturer: RS-Simulators / VTS 1200/75/S Temperature range: -75 to +180°C External dimensions: 2.30 x 2.30 x 2.80 m (L/W/H) Test chamber dimensions: 1.10 x 1.00 x 1.00 m (L/W/H) Unit: 2.30 x 1.30 x 2.00 (L/W/H) Average heating rate: approx. 5 K/min (from -40 to +150°C) Average cooling rate: approx. 5 K/min (from +150 to -40°C) Current: 38 A Connection voltage: 3 x 400V/NPE 50 Hz Weight: approx. 2700kg Bdjdpfswp Ip Eex Al Isb Item condition: used item Contact us if you have any questions Shipping: the stated shipping costs apply to deliveries within Germany Worldwide shipping (shipping costs outside Germany on request) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale only to commercial customers without warranty or guarantee. Deviations from technical data as well as errors in the description of the items may occur and are reserved.

Condition: new, Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving your hands free to align the workpiece. Technical data: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Downholder pressure: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Bjdpfx Ajtvnczel Isdb Motor power: 5.5 kW Equipment: - High-quality, high-alloy shear blades with a high chrome content - Upper blade with 2 cutting edges, lower blade with 4 cutting edges - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Lateral stop with double scale - Feed worktable with ball rollers - Full-length front intervention guard - Hydraulic, independent hold-down device - Manual back gauge 600 mm - Overload-protected hydraulic system - Safety foot switch Options: - Hydraulic sheet holding device - Increased motor power for more strokes / min - Back gauge with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC back gauge 800 mm with M15S control unit - CE conformity

Condition: good (used), Year of construction: 2004, Belt conveyor, Transnorm, approx. 2.80 m long - second-hand Price ex location (net): only 895.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos32 Manufacturer: Transnorm Type: TS 1100 belt conveyor Bodou Erqkepfx Al Ijdb Year of construction: 2004 Length: 2.805mm Nominal width: 400mm Belt type: HSL 8 E PU Belt length: 6025mm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 1998, Belt conveyor, Transnorm, approx. 3.98m long - second-hand - Price ex location (net): only 895.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos75 Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of construction: 1998 Length: approx. 3,98m Nominal width: 500mm Element width: approx. 60cm Motor: SEW Condition: good Available immediately Bedpfx Alju Ezyno Iedb Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2004, Climbing belt / belt conveyor, Transnorm, approx. 2.83m long - second-hand - Price ex location (net): only 895.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos38 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of construction: 2003 Length: 1230+800+800mm Nominal width: 400mm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony Bdsdpfju Erzijx Al Ieb

Condition: good (used), Year of construction: 2003, Belt conveyor, Transnorm, approx. 3.55m long - second-hand - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Bjdpju Er Hfofx Al Iedb Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos40 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of construction: 2003 Length: 3.000mm Nominal width: 400mm Belt type: NSL - 10?LBV Belt length: 6075mm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: good (used), Year of construction: 2003, Climbing belt / belt conveyor, Transnorm, approx. 3.55m long - second-hand - Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos39 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of construction: 2003 Length: 1950+800+800mm Nominal width: 400mm Motor: SEW Condition: good Available immediately Bsdpfx Alju Etq Ss Isdb Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: good (used), Year of construction: 2003, approx. 6x belt conveyors, Transnorm, approx. 0.70m long - second-hand - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos2+3+4+5+6+8+ Manufacturer: Transnorm Type: TS 1200 Year of construction: 2003 Element length: 700mm Bodpfx Aleu Ezy Is Iodb Element width: approx. 50cm Belt width: approx. 40cm Belt type: NSL - 10ELBV Belt length: 1490mm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Bsdpfxow U A Dmo Al Iodb Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 4/33, Offered for sale is a Meyer Burger separating saw, model TS121, in used, original, and immediately ready-to-use condition. The machine has been workshop-tested and serviced; maintenance and wear parts have also been recently replaced. Bdedpfx Aexy Ny Dsl Ijb The rotary table has been replaced by us once and operates absolutely flawlessly and precisely. It is integrated into the original control system (like the original rotary table). The control system is a Sinumerik 810M with electronic handwheel. Additional services can be discussed and ordered as options, including a complete retrofit with CE certification and more. The machine is available from stock and ready for demonstration. The machine is complete, and the original documentation is available. The pictures shown are ours and up to date. For further information or to coordinate details, please contact us briefly. The machine is available from our stock. Interim sale is always reserved. TIP: We constantly have further Meyer Burger machines and spare parts in stock – feel free to visit our homepage! Contact us, we are happy to advise you!

Year of construction: 2025, condition: new, 11 m² dryingsurface, powersupply:7,5 kW, totally in inox-steel Bdsdpfxob Ipxwj Al Isb with temperature and humidity control, for fruits and vegetables, meat,...

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH Bsdpfx Alsy D Hiao Iedb • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm

Condition: new, €1,690 + 22% Italian VAT. For customers with a valid VAT ID, a net invoice will be issued. ----- With the Brugger Power Split S14, we present a powerful vertical log splitter with an impressive splitting force of 14 tonnes. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in drive options—either via the 3.7kW electric motor or the PTO shaft. Features: - 14T splitting force - Combination drive: 3.7kW electric motor & PTO drive - Weight: 250kg - Up to 110cm log length - Log lifting device The scope of delivery includes a log lifting device, making it easy to handle heavy logs. A hydraulic winch is optionally available, further expanding possible applications and simplifying operation. With a maximum splitting length of 110 cm, the Brugger Power Split S14 offers the flexibility to process even larger logs effortlessly. A log support table for shorter wood pieces is also included. The Brugger Power Split S14 is the ideal choice for anyone seeking a reliable and high-performance solution for wood splitting—whether for professional or personal use. Prices + VAT: Power Split S14 = €1,690 Power Split S22 = €2,670 Bedsxn Iq Rjpfx Al Iodb Power Split S30 = €2,960 Accessories: Support table for short wood = €125 4-way splitting wedge = €99 Hydraulic winch = €595 ----- Contact us for your tailored quotation!

Condition: used, Year of construction: 2003, operating hours: 5,000 h, Used Kosme Labeling Machine Extra Hot Melt 8T S1 E1 2003 Dimensions: 2.5m x 1.5m Power supply is 400V. Power capacity is 11kW. Air consumption is 60l/min. Nominal pressure 5-6bar. Bdedpfxjvgurio Al Iob Has run 1.5L, 0.5L, and 0.33L PET Bottles, and includes all the relevant parts such as the base plates etc. for these sizes. The label size of the 1.5L Bottle was 82mm x 278mm. The label size of the 0.33L Bottle was 40mm x 203mm Output capacity: 7,000 bph Working hours: approximately 5,000 hrs.

Year of construction: 2016, condition: excellent (used), ATLAS COPCO XATS186 11,4m3 10,3BAR COMPRESOR 2016! Mobile compressor ATLAS COPCO XATS186 ST4 machine with aftercooler (air dryer) after full service!!! Technical data: capacity 11,40 m3/min; Bdsdpfspitifox Al Isb working pressure 10.3 Bar; year of production 2016; JOHN DEERE engine mileage 1582 h !!!!!; compressor fully operational,ready to work,warranty net price: 128500 zł gross price: 158055 zł machine in perfect condition!!! Below is a link to the video , showing the work of the machine

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017. Mobile compressor ATLAS COPCO XATS 138 machine after full service!!! Technical data: capacity 5,00-7,00 m3/min; working pressure 7-10.3 Bar; year of production 2017; KUBOTA engine mileage 500 h !!!!!; compressor fully operational Bdedpfx Ajid Iy Hjl Ieb Below is a link to the video , showing the work of the machine Compressor ATLAS COPCO XATS138 7.00m3 2017 tank capacity 0 l

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 800 h, functionality: fully functional, clamping force: 1,250 kN, ejector force: 25,000 N, All FANUC Roboshot CNC machines are FULLY ELECTRIC -warranty -only 62 hours Demo FANUC Roboshot S100iB 2024 This machine was used at trade fairs as a demo unit and is practically new. Clamping force: 125 tons Screw diameter: according to customer specifications All additional equipment is configurable based on customer needs and can be upgraded to meet specific application requirements. Additional optional equipment: -FIBER sorting flap (for separation of good and reject parts) Bdjdpfx Aoya D I Dol Isb -Hot runner controller (integrated and connected to the machine) -V-gate -Additional electrical sockets -Electrical quick coupling for fast mould change -Water piping system -Mouldflo system for digital monitoring of water flow, temperature, and pressure -Machine elevation by 100 mm -Hydraulic power unit for side cores (2CH / 4CH) -Robot (cartesian or 6-axis FANUC robot) -and more This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia.

Condition: good (used), Double side grinder for carbide saws VOLLMER model Finimat DUO TS 1000 Bdedpjvgfifefx Al Ieb

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 - S/N 9813 Bsdpfx Aewrh Hvel Iedb - Year 1998