Used radial drilling machines 1000-1299mm arm length for sale (67)

Condition: used, Kitchen and Walker E2 4ft 6 inch, serial number 1627, speeds 25-1560 rpm, DC brake, power rise and fall, two faced tee slotted box table 850 x 1000 x 500mm (high) 2.5 inch drill capacity. Iedpfjx Tcxiox Addjtb

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm arm length / mm Itjdpjwt Dwaefx Addob workpiece height max. / mm Table dimensions: 1200x580mmTable dimensions: 1200x580mm

Condition: excellent (used), Year of construction: 2004, drilling capacity: 32 mm, column diameter: 200 mm, Heidenhain RADIAL ND 1200 R ; HeidenHain scales HeidenHain measuring probe for: Rectangle target pattern Frame target pattern Circle target pattern  Line target pattern Itjdpfx Ajx S H Nvjddob Arm Length: 1000mm Max. drill Ø cast: 32mm Max. tap Ø: 30M Stroke pinole: 240mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Floor / table area: 1370 x 700mm Speeds / ranges: 1220Rpm Spindle Taper: 4ISO/Bt/Mk Throat: 1000mm Column sleeve: 200mm Quill Ø: 50mm Length: 1400mm Width: 720mm Height: 1900mm Weight: 1200kg

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom Itedpfxoxaaabs Addsb - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Iedpfjx Hfugox Addstb Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000.

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Itsdox U Ectopfx Addob Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Itedpfx Ajx Sw Ngjddeb Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm arm length 1050 mm Vertikal stroke 450 mm quill stroke 200 mm spindle taper MK 4 spindle turning speed range 15 - 2800 U/min Itjdpfxox Szp Rs Addob transmission ratio 2 distance spindle /table 710 mm weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm

Condition: not inspected (used), functionality: fully functional, Maintained radial drilling machine Iedpoirngajfx Addetb drilling capacity in steel: 40,0 mm throat: 1300 mm tool holder: MK4 max. swivel angle: +/- 180 degrees quill stroke: 280 mm Min. distance column - drilling spindle (X) 593 mm Max distance column - drilling spindle (X) 1473 mm Speed: 52 - 2000 rpm (12 steps) Feed rate: 0,05-0,1-0,2-0,3 mm/rev (4 steps) column diameter: 250 mm spindle diameter: 68 mm clamping area: approx. 1445 x 810 mm operating voltage: 400 V Total power requirement: 5.5 kW Machine weight: approx. 2815 kg. Space requirement (L x W x H): 2010 x 820 x 2495 mm Equipment: - electric height adjustment - hydraulic clamping of the drilling slide and the column - cube clamping table with T-slots - automatic spindle feed - R/L run of the drilling spindle - electric height adjustment from boom - speed adjustment manual - feed adjustment manual - handwheel for drill carriage adjustment We will be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light Itodpjwa Tc Sefx Addeb • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: good (used), Breda radial drilling machine Ijdsx Rt Ezjpfx Addetb Type R 1220 MP 400 Volt, 3 kW Spindle taper MK 5 Arm length 1250 mm Speed 30–1200 rpm with swiveling table

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Iedpovm Akgofx Addjtb universal head portable radial

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 Isdjwid Auopfx Addstb bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U Itedev S Ay Sepfx Addsb weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,8 x 0,8 x 2,5 m Iedpfovhbpqjx Addstb Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *

Condition: used, Year of construction: 1980, 1 unit radial drilling / coordinate boring machine, Manufacturer WMW / VEB, Model BR 40/2x1250, Serial No. 8760GS, year of manufacture approx. 1980, weight 3 t, internal No. 8 Ijdpfsyaxl Rex Addjtb Category: Machinery & Technical Equipment Award subject to reservation: The awarding of this item is subject to reservation and independent of achieving the minimum price. A decision regarding the award will be made as soon as possible.

Condition: good (used), KOLB radial drilling machine NKR 43 spindle diameter 80 mm spindle stroke 325 mm Projection 1250 mm 5.5 KW Iodpfxjf Ddqgo Addjtb rpm 50 - 2100 Angle bracket LxWxH 610x500x530 mm Dimensions LxWxH 2420x920x2850 mm Weight approx. 3,5 to

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle mount MT 5 Throat 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Isdetwzk Dspfx Addstb Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Feed • Right-to-left travel • Motorized up and down travel • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2023, 50 mm Itodpewp S U Sofx Addeb 1250 mm 1345 - MK 5 bore depth 270 mm spindle turning speed range 56-1450 U/min

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm Itjdjm Sg R Depfx Addsb MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw spindle speed 22 - 2000 rpm Weight 2 to

Condition: good (used), 12 speeds 44–1500 rpm. TAI PIIN TPR-1100. MODEL: 1100 Year of manufacture: 1994-11 Drilling capacity in steel: approx. 40 mm Drilling capacity in cast iron: approx. 55 mm Tapping capacity: steel approx. M25, cast iron approx. M38 Arm length: 1100 mm Travel over slide arm: approx. 900 mm Spindle taper: Morse taper MT4 Spindle speed: 44–1500 rpm, 12 steps Automatic feed: 0.05 / 0.09 / 0.15 mm/rev (3 steps) Isdjxxv Raopfx Addjtb Spindle stroke (quill travel): 250 mm Column diameter: approx. 260 mm Box table: approx. 635 × 520 × 415 mm Base dimensions: 1725 × 715 × 180 mm Max. machine height: approx. 2530 mm Spindle motor power: approx. 2.2 kW (3 hp), 2-speed motor Transport dimensions: Height: 2000 mm x Width: 720 mm x Length: 1750 mm Weight: 1850 kg

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Itodoi D Daqopfx Addob Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Isdpfxjx Eb Rfo Addjtb Weight: approx 2,5 T

Condition: used, Radial drilling machine WEBO Type R4bR Itjdpfsu T Ty Hox Addeb Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: excellent (used), Year of construction: 2007, BEMA MG1050 Radial Arm Drilling Machine Year of Manufacture 2007 Itsdpfsxawcmex Addob 1000mm Radial Arm Spindle Centre to column min/max 300 - 1000mm Spindle Taper 4MT Spindle Motor 2.2kW Speeds 32 - 2500rpm Spindle Stroke 280mm Box Table 600 x 450 x 450mm Base Plate 1700 x 800mm LWH - 1760 x 800 x 2050 Weight 1600Kgs *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78995 Machine Serial Number: 710080 Cost: £5,950.00 + VAT (£7,140). Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.