Used Kuhlmeyer Vertical Edge Belt Sander for sale (19,102)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. Hnsdpfx Aljudxchobor - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Hsdpfxotwzyfe Albjnr Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, edge sanding machine - made in AUSTRIA Hnedpfx Ale Dxrgobjr motor 2,2 kW, 400 V, 50 Hz oszillation 0,18 kW, 400 V, 50 Hz sanding belt length 3000 mm sanding belt width 200 mm work table seize 1000/ 300 mm weight 300 kg roller DM 120 mm sanding roller DM, exchangeable 65/ 115 mm small sanding table for round sanding 350/ 250 mm mitre fence suction DM 140 mm

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Hnedpfx Aljv D H Sisbjr Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. Hnedpfewwkuyjx Albjr - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Condition: excellent (used), Sandingmaster 2000 - Feed rate: 4–16 m/min - 16 kW - Sanding width: 900 mm - Year of manufacture: 1995 Hnodpfx Aley R U D Esber - Dimensions: 1800 x 1800 x 2300 mm Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: used, Technical details: Working width: 1700 mm Workpiece thickness max.: 150 - . 4,0 mm Hnsdpfxeu Ng R Hs Albjr grinding belt dimensiones: Umlauf mm machine dimensions LxWxH: 4,8 x 2,7 x 2,35 m For woodworking!!!!! pneumatic conveyor guide height adjustment via hand wheel EMERGENCY STOP switch - grinding rolls adjustment - band clamping device - roller conveyor ( infeed and outlet each L: 2800 x W: 1700 mm each with6 pc Rolls) motoric driven - operation via control panel - worpiece thickness min./max. 4,0/150mm - grinding belt width 1300mm - grinding belt support length / width: 1700/1350mm ON SALE AS IS without electric cabinet, because machine was operating in a production line with other machines and one electric cabinet! Machine won't be connetcted! *

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Hnodpfoxlqutex Albor Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: new, Year of construction: 2026, CORMAK MM2315Q 400V Wood Edge Sander The CORMAK MM2315Q 400V is a compact yet highly versatile edge sander designed for intensive, multi-purpose use in woodworking shops and manufacturing facilities. Featuring a robust construction, the ability to sand both straight and curved workpieces, and operation in both vertical and horizontal positions, the MM2315Q is a reliable solution for professional wood processing applications. Key Features Versatile operation – suitable for sanding both straight edges and curved workpieces thanks to the additional auxiliary table. Quick belt replacement – the lever-operated system allows fast, tool-free sanding belt changes, significantly reducing machine downtime. Flexible applications – the adjustable sanding unit can be positioned for both horizontal and vertical operation, expanding the range of machining possibilities. Precision and control – both the main worktable and the auxiliary contour sanding table feature height adjustment, allowing precise setup according to the workpiece dimensions. Stable and durable construction – the rigid steel frame minimizes vibration, ensuring consistent sanding pressure and repeatable results. Compact footprint – despite its wide range of capabilities, the machine occupies minimal floor space, making it ideal for workshops with limited working areas. Construction and Technology The CORMAK MM2315Q edge sander is built on a heavy-duty steel frame, providing exceptional rigidity and resistance to deformation under load. The 1.1 kW three-phase 400 V motor delivers stable belt speed of 840 m/min, ensuring efficient and consistent material removal. The sanding unit features an adjustable sanding angle from 0° to 45°, enabling precise edge and end-grain sanding at various angles, making it ideal for finishing operations and machining irregularly shaped components. The precision belt tensioning system maintains optimal belt tension, extending abrasive belt life while ensuring smooth and stable operation. Precision and Performance The large 790 × 221 mm worktable and a maximum sanding length of 790 mm allow accurate machining of large workpieces. The height-adjustable worktable and the additional 514 × 221 mm auxiliary contour sanding table provide excellent support and precise guidance, even when working with complex shapes. Standard Equipment Auxiliary table for sanding curved workpieces Quick sanding belt replacement mechanism Precision belt tensioning system Adjustable sanding unit for horizontal and vertical operation Integrated Ø100 mm dust extraction port for connection to a dust collection system Operating manual (Polish) CE Declaration of Conformity Technical Specifications Specification Value Sanding belt size 2010 × 152 mm Worktable size 790 × 221 mm Table height 810 mm Stand height 600 mm Auxiliary contour sanding table size 514 × 221 mm Maximum sanding length 790 mm Hnsdsvuggzspfx Albor Dust extraction port diameter 100 mm Edge and end-grain sanding angle 0–45° Belt speed 840 m/min Motor power S1: 1.1 kW / S6: 1.5 kW Power supply 400 V Weight 90 kg Warranty 12 months Operating manual Yes CE Declaration Yes

Condition: new, Year of construction: 2026, The CORMAK MSM250 multifunctional belt and disc grinder is a modern and efficient combination grinding machine designed for industrial, workshop, and woodworking applications. By combining two functions – belt and disc grinding – the machine provides maximum flexibility and efficiency when processing metal, wood, and plastics. Equipped with high-quality NSK bearings, this grinder operates extremely quietly, smoothly, and reliably for a long service life. This distinguishes it from competing products and ensures professional performance. The belt grinder with a base features a balanced rotor supported by ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive grinding operations. The integrated Ø38 mm dust extraction connection allows easy connection to an extraction system, improving working comfort and safety. Additionally, the CORMAK MSM250 disc grinder with a base is equipped with an adjustable work rest and IP54 protection, ensuring precision and operator safety. If you are looking for a reliable bench grinder with universal applications, the MSM250 model will meet the expectations of even the most demanding users. Main features of the machine: Combination belt and disc grinder – maximum functionality Industrial NSK bearings – quiet operation and high durability Suitable for grinding metal, wood, and plastics – versatile applications Motor with copper windings – reliability and efficiency Ø38 mm extraction connection – clean and safe working environment Stable base – improved comfort and ergonomic operation Technical specifications Hsdpfoxfgw Rox Albenr Parameter Value Grinding disc size 250 × 32 mm Grinding disc bore 32 mm Disc grit K40 Grinding belt size 1020 × 75 mm Belt grit P80 Speed 2960 rpm Motor power S1 0.9 kW Motor power S6 1.5 kW Voltage 400 V Dimensions 570 × 310 × 1410 mm Weight 32.5 kg S1 – motor power during continuous operation under full load. S6 – motor power during intermittent operation with idle periods accounting for up to 40% of the duty cycle.

Condition: used, functionality: fully functional, On offer: SAMCO Unilev 150 edge sander – double-sided, working height 150 mm. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its double-sided design, which allows for the use of both sides of the sanding belt. The adjustable platen, two belt speed ranges, and tilting worktable enable sanding of straight edges, angled components, veneered components, and internal curves. Hnsdpfjzqan Tox Alber Specifications: • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 × 2150 mm • Sanding belt speed: 2 ranges • Number of worktables: 2 • Worktable dimensions: 220 × 1440 mm • One worktable adjustable at an angle from 0–30° • Motor power: 3.5/4.5 HP • Pneumatic belt tensioning and oscillation • Adjustable platen for precise sanding, including veneered components • Fixed opposing belt pressure surface: 150 × 750 mm • Attachment with protractor for angled sanding • Additional table with roller for sanding internal curves • Dust extraction port: Ø140 mm • Weight: approximately 450 kg • Overall dimensions: 144 × 72 × 133 cm (L × W × H) Applications: • Sanding straight edges of solid wood components • Sanding edges of glued components and boards • Precise sanding of veneered components • Sanding edges at an angle • Sanding curves and internal profiles • Preparing edges for painting, oiling, or further processing Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-Community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using our MDD fleet or through external carriers • We assist in obtaining leasing or hire purchase financing • The delivery cost depends on the destination and the method of machine transport MDD maszyny do drewna is a company specializing in the sale and service of used woodworking machines. We offer professional advice, technical inspections, repairs, and machine preparation for operation. We support customers both before and during the machine's subsequent use. We regularly update our offer. If you are looking for a machine that we do not currently have, we can help you find and import it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco, and many others. Contact us for more information, to arrange a machine demonstration, and to find out the transport costs. MDD maszyny do drewna – sales and service of machines for the woodworking industry.

Condition: used, VG F-300 belt grinder grinding width 300mm, 1 unit (rubber roller) + base 5.5KW motor. two feed speeds, manual table adjustment, Hnjdpfoziankex Alber oscillation, the grinder is fully ready for operation.

Year of construction: 1988, condition: good (used), table dimensions 2500x800mm built-in extraction Hnedpfx Aljih H Eajbor 4kW engine electric adjustment of the table up / down power supply 380V

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Hnsdpfx Alsyn E H Rjbsr Further technical information can be found in the documentation.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, COSTA wide belt grinder, two-roller model, 1350 mm roller width. The machine features a contact roller and a finishing polishing platen. Hnodpfx Aley Tx Exebor

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. Hedpsy Uahwofx Albonr The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture.

Condition: excellent (used), functionality: fully functional, SCM Sandya 10 wide belt sander Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 1. Metal calibrating roller Hnjdpfozggzrjx Albor 2. Combi unit with shoe Combi unit with abrasive belt blowing system Two feed speed settings Material thickness gauge Main motor power: 11 kW Dust extraction connection: 2 x 160 mm Machine weight: 1620 kg Machine dimensions: 165 x 186 x 206 cm (H)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, KUHLMEYER Type ZBS Twin-Belt Grinding Machine - incl. automatic mode and scissor lift table Hedpfx Aeza Uhhslbsnr - for rough and fine sanding in a single machine - Machine location: The Netherlands - Further technical specifications, information, and videos of the machine are available upon request.

Condition: new, Year of construction: 2026, total width: 2,000 mm, total height: 2,000 mm, total length: 1,620 mm, working width: 1,100 mm, overall weight: 1,000 kg, power: 12 kW (16.32 HP), input current: 20 A, sheet thickness (max.): 120 mm, sheet thickness steel (max.): 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm wide. DM1100 Z finishes and deburrs light metal sheets cut by laser, punching or shearing. This machine has a single wide belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, where it can be used with both standard sandpaper and non-woven/scotch belts. DM1100 Z Working capacity (mm) 1100x120 No. of belt stations (Z) 1 Sanding belt, dimensions (mm) 1100x1850 Sanding drum specifications Ø186mm Sanding belt speed (m/s) 8-22 Feed speed (m/min) 1.5-10 Hedpfx Aotzfpkslbonr Sanding belt motor per head (kW) 11 Feed motor (kW) 0.18 Total power (kW) 12 Power consumption (A) 20 Rod suction connection per head (Ø mm) (1x) 152 Dimensions (mm) 1620x2000x2000 Weight (kg) 1000

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Hjdpfxjynk Dne Albjnr Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Hsdpsx Dm Tvjfx Albjnr Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: new, ACETI belt sander, adjustable, model 17 Voltage: 400 V – Three-phase Electrical power consumption: 1.1 kW RPM: 2800 Hnsdpfxskt Uu Ej Albjr Belt width: 120 mm Belt length: 1500 mm Weight: 75 kg

Condition: excellent (used), Working width: 110 cm First unit: steel roller Second unit: combination – rubber roller plus pad Pneumatic belt cleaning Pneumatic oscillation with photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt size: 2200 x 1130 mm Voltage: 400 V Motor: 12 kW Weight: 1542 kg Hsdpfx Aow Drb Ujlbjnr Year of manufacture: 2004

Condition: good (used), functionality: fully functional, SCM Sandya 30 RT wide belt sander Working width: 1100mm Working height: 3-160mm Number of sanding heads: 2 Steel calibration roller Sanding head with a segmented platen divided into 20 sections Motor power: Hnodpfx Alozdgltjbsr 1.15 kW 2.11 kW Optical oscillation Dust extraction system on the second sanding head Spare segmented platen Belt dimensions: 2620x1115mm Feed speed adjustable by means of a variator Machine dimensions: 180x300x230cm (H) Machine weight: 2700kg

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Hjdex A Unxepfx Albonr Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg