Used Litech Laboratory Jaw Crusher for sale (5,156)

Condition: ready for operation (used), Feed diameter: 200 mm Hedpjzhu Txsfx Abgop Bore: 37 mm mounted on table base: 900 x 600 x 1500 mm

Condition: good (used), Manufacturer: LuT Metalltechnik GmbH Type: LTP 1300/1300 Rotor Dia. x W: 1.300 x 1.300mm. Hodpfxowu Uqys Abgsp Inlet size: 1.360 x 1.000mm Included: – 160 KW E.motor – Control-cabinet with softstarter New Spare-parts in stock. Crusher can be sandblasted and painted.

Condition: good (used), Year of construction: 2005, Manufacturer: Hazemag Type: AP-KH 1006 Rotor Dia. x W: 1.000 x 670mm. Inlet size: 690 x 350mm Included: – 55 KW E.motor – Control-cabinet Hsdpfxowu Urdo Abgjp – Hydraulic unit – Frame New Spare-parts in stock. See PDF-file below for more detailed information.

Condition: good (used), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 -1 Roll Dia.: 630mm Hodpfx Abjpxn D Isgep Roll Width: 800mm Included frame and electrical motors.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/105/H65 mm Hjdpfx Abszfh Auegjp -Total weight: 4.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Hsdpfx Aszfgmrobgsp -Top jaws: Jaw set for three-jaw chucks -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Hjdjzfgmlepfx Abgjp -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Hjdpfx Aszfgmfebgop -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 70/90/H57 mm -Total weight: 1.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm Hjdpezfgl Ijfx Abgjp -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H65 mm -Total weight: 3.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Hjdpfx Aozfglzjbgop -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 3.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Hjdezfgiyepfx Abgop -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Hjdpezfgh Nofx Abgep -Top jaws: Jaw set for four-jaw chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Overall dimensions: 110/105/H67 mm -Total weight: 5.4 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Hsdezfgh Aepfx Abgop -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/80/H67 mm -Total weight: 2.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Hedozfgg Eepfx Abgep -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/65/H55 mm -Total weight: 1.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg Hedpfszfggrex Abgop

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Hjdpfx Aszfgd Rebgjp -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/85/H60 mm -Total weight: 2.9 kg

Condition: used, all stainless steel for product up to 530 x 530 mm Dimension: (L x W x H): 950 x 1.450 x 1.900 mm Hjdpfxszc E S Ne Abgjp 3 x 380V, 50Hz, 22kW

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Hodjzdtflepfx Abgop Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Despatch laboratory oven. Despatch laboratory oven + 8” WAFER LCC: Maximum temperature 260 °C Lockable disconnect switch – turn off the control panel for easy maintenance Protocol 3 controller with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel interior with continuously welded interior seams on the insulation side to protect the working area from contamination Programmable door interlock prevents the operator from opening the oven door while the cycle is running The door interlock switch turns off the heating when the door is opened The recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic manometer monitors the pressure drop of the HEPA filter, so you know when the filter needs to be replaced Electric door release for ergonomic operation UL & C-UL listed control panel opens Modbus communication connection (RS485) for remote monitoring and recording Chamber dimension L 350 mm Chamber dimension W 350 mm Chamber dimension H 350 mm maximum temperature 260°C Digital display Yes Electrical connection 230 V Hsdpfx Abszdr Ekjgsp Overall dimension L 830 mm Overall dimension W 910 mm Overall dimension H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), functionality: fully functional, overall weight: 30 kg, 2 sets of hard, reversible top jaws for RÖHM chucks, helical design centric adjustment 2 sets of soft, pre-machined top jaws for RÖHM or BISON chucks Mounting on base jaws for chuck types (base jaws available upon request). for chuck types RÖHM ZGU 500.630, 700 RÖHM ZSU 500, 630, 700 UGU 500, 560, 600, 630, 710 Hodpfx Abowu R Nrjgep USU 500, 560, 600, 630, 710 ---- The listed price is per set of 3 pieces. Four-jaw chucks: 4 pieces available upon request. Dimensions: hAB = hard top jaws = width B = 63 mm wAB = soft top jaws = width B = 50 mm ---- 2 mounting holes ø 20 mm Center distance 76 mm Longitudinal groove in jaws 12.7 mm Transverse groove in jaws 17.0 mm ---- Total weight approx. 40-50 kg RÖHM ZS chucks - ø 500 mm; ø 600 mm; ø 800 mm ----- Signs of wear are present. The jaws have been cleaned, inspected, and are in good condition.

Condition: used, Two Forkardt faceplates Diameter 200mm Hsdpfscurfysx Abgep 2 BHE 200 Short taper diameter 106.4 mm = Size 6 Bolt circle diameter 133 mm

Condition: as good as new (ex-display), Top jaw Manufacturer: SMW Autolok Type: 080 954 WAKS 500 10 16 Mn Cr.5 Hjdpoftz Adsfx Abgjp Weight per piece: 4.6 kg

Condition: as good as new (ex-display), soft jaws Manufacturer: SMW Autolok Type: 13/643 Material: 15CrNi6 Weight per piece: 9 kg Hjdeftzzyspfx Abgsp

Condition: excellent (used), Claw chuck Hedeg Ny Iyopfx Abgjp Manufacturer: Schunck Type: SZA 25 - 30 Weight: 3 kg

Year of construction: 2015, condition: like new (used), Screw-on jaw Claw jaw Type SZKA 312 Hedofmdgcopfx Abgep Weight 3.2 kg