Used wire EDMs with x-travel of 300-399mm for sale (60)

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505 Fsdoz Ar Agepfx Al Sogh

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Fgodpfx Aljz Dpapo Sjh

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Fedpfx Aez Dpacol Sogh

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Fsdpozr D Dnefx Al Ssgh

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Fsdpfxoz I Nbbj Al Ssgh Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. We also offer on-site commissioning and training for this machine.

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Charmilles P25 Fodoz Nhwrspfx Al Sogh Year of manufacture: 1983

Condition: excellent (used), AGIE – CNC wire electrical discharge machining (EDM) machine – AGIEMATIC CF20 / AGIEPULS MMD / DA-15/TP For sale, a complete industrial CNC wire EDM machine from AGIE, manufactured in Switzerland. The machine is designed for the precise cutting of metal components using the wire EDM process. The offered set includes: - AGIE AGIEMATIC CF 20 – CNC control - AGIEPULS MMD – pulse generator for EDM - AGIE DA-15/TP – dielectric preparation and circulation unit - working fluid filtration system - cooling unit Fgedpfx Asz Et Rusl Seh - pumps and auxiliary equipment - complete set of cabinets and accessories as shown in the pictures Device data from the nameplates: AGIEMATIC CF 20 - series: 465 - device: 004 - weight: 280 kg - power supply: 3 × 380 V - 50/60 Hz - power: 1.2 kVA AGIEPULS MMD - series: 436 - device: 001 - weight: 415 kg - power supply: 3 × 380 V - 50/60 Hz - power: 10 kVA DA-15/TP - series: 228 - device: 004 - weight: approx. 420 kg - power supply: 3 × 380 V - 50 Hz - power: 4.8–6.9 kVA Manufacturer: AGIE, Switzerland. The machine is a complete set with the original AGIE control, generator, and dielectric system. Condition: used, condition as shown in the pictures. Inspection on-site is possible. Before purchasing, it is possible to verify the completeness of the equipment.

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 370 mm Travel distance Y :270 mm Travel distance Z: 255 mm max. workpiece size X: 700 mm max. workpiece size Y: 600 mm max. workpiece size Z: 250 mm max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 60 generator: 13 Ampere submerged cooling unit FANUC Series 31i-WA control Automatic wire threading Fodpfx Aljz Eqk Se Ssgh Cutting in water bath Cooling unit Filtration system

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Fodpfx Aljzncqlo Sogh Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min Fjdpfxszrh N Ue Al Segh rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2022, operating hours: 4,204 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 550 kg, total height: 2,350 mm, total width: 2,025 mm, total length: 2,040 mm, overall weight: 2,920 kg, table load: 550 kg, Operating hours 24,038h, cutting hours 4,204h, tool changer, fire extinguishing system, dielectric tank 400l, max. electrode weight 50kg, extraction system is not included in the scope of delivery. Fgjdpfx Aleyu R Imo Ssh

Condition: good (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, table width: 450 mm, overall weight: 2,100 kg, table length: 680 mm, Equipment: documentation/manual, 3-axis erosion machine. Fodpfx Aoz D Na Nsl Segh

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Fodpfx Aozuclisl Sjgh Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Fjdpfx Alszbimhe Ssgh Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. Fodpfx Aoy Tvtmel Segh 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR Fodpfx Aloy Twkas Sjgh SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 12 mm, number of axes: 5, wire diameter (min.): 6 mm, This 5-axis Sodick AQ300L wire EDM machine was manufactured in 2004. It features a maximum workpiece weight of 660 lbs and a wire diameter range of 0.006" to 0.012". The machine is equipped with linear motor drives for enhanced precision. If you are looking to get high-quality electrical discharge machining capabilities, consider the Sodick AQ300L wire EDM machine we have for sale. Contact us for further details. Fgedpfxez D Eyfs Al Ssh • Control Unit: LN1W Linear Servo CNC Control • U & V Axis Travel: 3.1 x 3.1 inches (approx. 80 x 80 mm) • Max Workpiece Weight: 660 lbs (300 kg) • Max Workpiece Height: 7.87 to 8.66 inches (200 mm) • Wire Diameter: 0.006" to 0.012" (standard), with some setups accommodating up to 0.019" • Taper Cut Capability: ±20°

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER Fgjdpfxoy Twg Us Al Seh WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING Fsdpfx Alsy Twf Rs Sogh RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS Fgjdpfoy Tw Tbox Al Ssh COOLING UNIT TEST CUT POSSIBILITY

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Fgsdeztp Emepfx Al Seh Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000S Year of manufacture: 2018 Fgodpjzlx A Sjfx Al Ssh Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm incl. option KIT 50 Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handheld control box for convenient setup VISION 5 control system 15" LCD color screen, jog shuttle and mouse Incl. AGIESETUP 3D Incl. Conic-Plus option for improved taper Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We will gladly perform an individual test cut. We also offer commissioning and training on-site for this machine.

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Fgedpfezf Akyjx Al Ssh Wire guides, 0.25 mm. Large bobbin kit.

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? Fgjdszxq Iyepfx Al Seh For further information or contact options, please use the contact form.

Condition: reconditioned (used), Year of construction: 2006, operating hours: 19,500 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, overall weight: 2,450 kg, Charmilles FI240SL, year 2006. The machine can be inspected at our premises in Semsales during April. The machine will be fully cleaned and serviced. Viewing available on request. Fgsdpfxsylkr To Al Soh