Used Müller Sdz 63.1.1 for sale (1,113)

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2026, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 970 mm, Year of construction: 2026, Equipment: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 TRIDEM TANDEM DUMP TRUCK - Dump body 5,000 x 2,420 mm (external dimensions) - Side board height 500 mm - Floor made of fine-grain steel S 420 MC, 4 mm thick - Side boards laser-welded from fine-grain steel, front wall fixed - 2 pairs of folding lashing eyes with lashing capacity LC 5000 daN, each pair recessed into the steel floor at the front and rear. 4 pairs of folding lashing eyes with LC 3000 daN recessed into the steel floor. - Mesh hooks integrated on each side and at the rear in the side board supports and in the front wall. - Reinforced and certified body according to EN 12642 XL - 2 LED reversing lights on the rear of the trailer - Aluminum loading ramps without a track for rubber-tired and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox Fedpfsy S Nwvsx Adcsph - Aluminum compressed air tank - BPW, with S-cam brake - Tires 235/75R17.5 Suitable for a coupling height of approximately 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Fpjdpfjvcqanex Adcsh Terms of delivery: ex location

Condition: good (used), Year of construction: 2009, Mueller P7505 Pure steam generator Serial: 394131-1 Fpsdpfjw Ha I Iex Adcjh 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph

Condition: used, maximum load weight: 14,300 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, first registration: 02/2020, next inspection (TÜV): 02/2027, loading space length: 9,800 mm, loading space width: 2,520 mm, Equipment: ABS, * ABS Fodjy T Dh Sspfx Adceph * Rear support * BPW ECO-Plus axles * Orange rotating beacon * Aluminum rims * Duomatik air connection ----Body: Hot-dip galvanized low-bed trailer (2500+7300mm) / Loading height approx. 900mm, sloped towards the rear / Driving height approx. 770mm, steel/wood floor and anti-slip covering, can be widened to 3 meters, hydraulic loading ramps (folded for a low driving angle) with anti-slip covering, also hydraulically side-shiftable, lashing points For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Fodpfx Adoy Erzdjcoph Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, maximum load weight: 6,610 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 11/2017, next inspection (TÜV): 10/2026, loading space length: 5,500 mm, loading space width: 2,470 mm, loading space height: 2,500 mm, loading space volume: 34 m³, Year of construction: 2017, Equipment: ABS, 2-axle Müller-Mitteltal TA-2 Pr.+Pl. Trailer VIN: H0061885 Chassis / Attachments: * Air suspension * Tires: 235/75 R17.5 * Remaining tread: approx. 70% * 1x Jost landing leg * 2x rear support legs Body: * Pr.+Pl. * Sliding curtain * Edscha sliding roof * Dimensions: 5,500 mm x 2,470 mm x 2,500 mm * Approx. 34 m³, 13 pallets capacity Weights: * Gross weight: possible 10,500 kg - derated to 10,000 kg (no SP inspection required) Fjdpsy Squpefx Adcoph * Unladen weight: 3,390 kg * Payload: 6,610 kg Miscellaneous: * German vehicle * MOT valid until 10/2026 * No SP inspection required due to weight derating New MOT / safety inspections or weight uprating/derating possible upon request. We are happy to assist you in obtaining export/transfer license plates, and can arrange vehicle transfers within Germany. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing or typographical errors. Subject to change, prior sale, and errors! --- Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our special strength lies in the sales of new and used commercial vehicles. On 11,000 sqm, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and trustworthiness. As customer satisfaction is very important to us, we offer our customers excellent all-round service and provide them with a knowledgeable contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle Loading We are happy to assist you with loading your purchased vehicles. Organization of Special Transports We are happy to help you organize special transports. Day plates / Export plates We can assist you in acquiring export or temporary plates. Handling of Customs Formalities We are happy to assist you in handling customs matters.

Condition: used, maximum load weight: 38,230 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2026, loading space length: 8,500 mm, loading space width: 2,520 mm, Müller-Mitteltal Low Loader with Wheel Wells TS 3 RM ML 30.0, 2 Loading Heights and Ramps * Kingpin load increase from 12 t to 18 t included. Kingpin mounted in: second kingpin position 2", kingpin up to and including gooseneck 2,750 mm. Rear swing clearance approx. 2,400 mm (min. 150 mm clearance recommended). Front swing clearance 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance between tractor unit and trailer to be ensured by the customer. * Extendable components in the front and rear wheel wells (205 mm deep). 6 planks for wheel wells, bracket mounting as per code 09.112. ALU air tank instead of steel. * Smartboard control box mounted on the trailer as information tool with pressure sensors, finally for total axle load display. Indication possible either at the control box or in the truck via the EBS air suspension system (depending on truck manufacturer). * ?SP combination package: toolbox with 45° corners in galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the platform. W: 2,480 × H: 500 mm, with top hinged lid, side doors, and slanted left side. ALU side walls foldable to saddle platform (500 mm high), ALU rear wall insertable (150 mm high), inside and outside drop sides painted RAL 9006 white aluminum. Including foldable & removable rear stanchions, galvanized (without additional coating). Including bolted front structure. Length from front crossmember to gooseneck 3,935 mm. Front swing clearance, without spare wheel at gooseneck 2,450 mm or 2,750 mm approx. 1,750 mm or 1,480 mm. * 2 container locks, recessed in the front crossmember * 3 storage compartments under the platform for either ALU loading ramps or wooden planks for wheel well covers * Folding/extending outriggers (galvanized) and wooden planks for widening included (not on rear slope), plank bracket on the platform (maximum cargo track width 2,500 mm) * Second LED position light on the warning package (front and rear, dual lighting), only available with warning package * 2 LED reversing lights at the rear of the trailer, controlled via reverse gear (suitable for 12 V and 24 V), maximum 2 additional allowed in total * 7-pin socket at the rear, wired for overlength lighting with tail light (58 R) and ground Fpodpfx Aoy R Ipujdceh * Rubber covering on left and right ramp slopes (approx. 860 mm long), 190 07644 rubber strips on the inside plank of the one-piece ramps * Fully automatic central lubrication system with pump (24V), grease container, and integrated trailer control, without connection to ramps (on steered version: including connection of distributor on platform). Note: Only compatible with towing vehicles with 24V lighting system! Subject to prior sale and errors! Sale exclusively under our general terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. In some cases, such errors are due to transmission errors in the systems of different platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal entitlement. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is given without guarantee and does not constitute a binding commitment.

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * KWH 9.9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Parabolic leaf spring suspension * Spring-assisted square tube supports at the rear with base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm or 50 mm screwed towing eye (height-adjustable) * Mount for an additional drawbar, located on the right side (direction of travel) of the coupling device * Chassis made of torsion-resistant square tubes and crossmembers * Plastic toolbox * LED lighting * Swivel-mounted cable drum assembly consisting of base frame, rotary bearings, and drum supporting arms * Supporting arm ends with tension locks for drum shaft protection * Locking of the swivel-mounted cable drum frame to the chassis via a centrally positioned claw lock Fjdpey R Ipnofx Adcjph * Steel drum shaft 76 mm diameter with centering and rotating ends * For drum diameter 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic operated pull and push cylinders with load-holding valve * Control valve with automatic neutral position and pressure relief valve * Hydraulic connectors, hoses, and pipes in NW 13 * Required hydraulic oil capacity approx. 10 liters * Drum drive is hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed controller and brake for drum drive * Hydraulic pump unit with diesel engine and hand starter, 6.5 HP with gear pump (150 bar) * Pressure supply optionally via re-plugging connections either from truck hydraulics or from the pump unit * Cover for weather protection, hot-dip galvanized without topcoat * Tyres: 315/80 R22.5 Subject to prior sale and errors excepted! Sale is exclusively according to our General Terms and Conditions. Important note: Despite careful inspection of all details in our offer, errors may occur. Some may result from transmission mistakes in the systems of various platform providers. Therefore, all information is given without guarantee and does not constitute legal claims. Legal notice: This advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The details provided here are not guaranteed and do not constitute warranted characteristics.

Condition: used, Hydraulic press line for deep drawing and forming processes, featuring multiple presses and automated parts handling. Manufacturer: Fritz Müller / Schuler Machine type: Hydraulic press line / transfer press Number of presses: 6 Press 1 Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 Press force: 12,000 kN Press 2 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 3 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 4 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 5 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 6 Type: ZE 800 – 40.3.1 Year of manufacture: 1993 Press force: 8,000 kN Max. workpiece size: 3,500 x 2,200 mm Max. tool weight: 32,000 kg Material thickness: 0.5 – 2.5 mm Fpedpfxey Ndz Rj Adcjh Max. drawing depth: 430 mm Documentation: No digital data available Drawings: Partially available as ink drawings, can be viewed onsite Packing lists: No packing lists with individual weights available Type plates: Not fully available, exact model designations only partially present Location: Radeberg

Condition: used, Year of construction: 1998, Stream feeders Müller Martini 3736 Fjdpfetq Nnxox Adcsph Year: 1997/1988 Description: - Stream feeders: 2 x

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Fpedpfx Aey Rtg Ejdceh

Condition: excellent (used), Professional industrial hydraulic press from the renowned German manufacturer MÜLLER – Fritz Müller Pressenfabrik Esslingen. Robust and heavy-duty construction designed for pressing, stamping, punching, and forming metal and technical components. The machine is in good visual and technical condition. Equipped with manual controls, stroke counter, and pressure gauge. This industrial-grade design is ideal for manufacturing plants, tool shops, workshops, and production lines. Technical specifications: Manufacturer: MÜLLER Model: S 16.1.20 Year of manufacture: 1977 Machine number: 9183 Machine type: hydraulic press Two-hand control Fpsdpfxey St R To Adcsh Stroke counter Pressure gauge Overrun path: 5 mm Overrun time: 35 ms Safety distance: 55 mm Robust steel frame Three-phase power supply Applications: - Pressing of metal components - Stamping - Punching - Forming parts - Production and workshop operations - Sheet metal and technical parts processing Delivery on pallet or loading via forklift possible.

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Fpodpfx Ajhcfzksdceh Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: good (used), Year of construction: 2001, machine/vehicle number: NN7716, Maximum book size: 40cm X 27cm, Minimum book size: 12 cm X 9,5cm Maximum book block size: 40mm, Minimum thickness book block: 3 mm, Max.speed 1500 p/h 4 Clamps, Milling, Back and side gluing with hot melt Fodpfx Adsrmkmrecsph

Condition: excellent (used), Offer consisting of: Presto E90, year of manufacture 2010, 6+1 feeders, Apollo cross stacker, available immediately Fedpoy H Anwefx Adcoph

Condition: excellent (used), functionality: fully functional, Low-speed machine with gearbox Cutting width - 250 mm Motor power - 3 kW Rotor speed 100 rpm Number of rotor blades - 20 pieces Fjdpfx Aeyf I Tbodcsph Number of stator blades - 2 pieces 7 units available, in perfect condition Capacity up to 50 kg/h Price 1550 EUR per unit

Condition: used, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 5,060 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2018, MUELLER MITTELTAL Anhänger ( KIPPER ) 5,06 m Fodpfsy E Ecnox Adcjph Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2018 AIRSUSPENSION TIRE SIZE: 385/55R19,5 WHEELBASE: 115 PLATFORM: 506 x 242 x 50 m TOTAL WEIGHT: 13 500 kg CAPACITY: 6 350 kg TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: excellent (used), Karl Müller dry-running, oil-free vacuum pump 6.3m3/min Manufacture: Karl W. Müller Type: SD-7-7NA 98724945 RA-8 2.9 kW, 50/60 Hz 230/400 V Capacity: 6.3 m3/min Pressure: 200 mbar Karl Müller dry-running, oil-free vacuum pump 6.3m3/min /ct1850 Manufacture: Karl W. Müller Type: SD-7-7NA 98724945 RA-8 Fpjdpfxetiy Tts Adceh 2.9kW, 50/60Hz 230/400V Capacity: 6.3 m3/min Pressure: 200mbar

Condition: used, Year of construction: 1997, power: 2 kW (2.72 HP), Bandsaw KARL MÜLLER HBS321GC for sale For sale is a robust metal bandsaw HBS321GC by KARL MÜLLER, built in 1997. Technical specifications: - Cutting diameter: 320 mm - Cutting range 90° round: 320 mm - Cutting range 90° flat: 350 × 250 mm - Cutting range 45° round: 260 mm - Cutting range 45° flat: 250 × 180 mm Fpjdpjy R Udrsfx Adceh Drive: - Motor power: 2.0 kW Dimensions & Weight: - Dimensions (L × W × H): 1950 × 1100 × 1450 mm - Weight: approx. 750 kg Features & Advantages: - Heavy-duty industrial design - Precise cuts at various angles - High stability and smooth operation - Ideal for steel, stainless steel, and other metals Year of manufacture: 1997 Condition: used Inspection and test run possible by arrangement Price: €2,500 net ex location Werdau

Condition: excellent (used), Year of construction: 2003, Ref:10925 . 2003 Muller Martini 3631 ‘CB-16’ Book Stacker. Compensating counter stacker for perfect bound books. Comprising:- Positive tape infeed 2-up product handling capability Separating and counting system Fpodpfx Aevzzt Asdcsh Automatic function monitoring by micro-processor Electronic programming of counting function Twin tape table delivery. Specification: Book size, Max: 450 x 450 mm Min : 140 x 100 mm Intake thickness, Max: 3 - 70 mm Stack height, Max: 240/300 mm Mechanical speed, Max: 18,000 cycles/hr. Air required : 6 bar, consumption: 50 Nm3/hr. (Note: separate compressor or in-house supply required).

Condition: excellent (used), Year of construction: 2010, Ref:10684 . 2010 MULLER MARTINI HK75 (pair) Ref:10687 . 2005 MULLER MARTINI HK75 (pair) Ref:10686 . 2005 MULLER MARTINI HK75 (pair) Ref:10682 . 2010 MULLER MARTINI HK45 NARROW (single) Ref:10680 . 2005 MULLER MARTINI HK45 NARROW (pair) Fpjdpet Dpqqjfx Adcsh Ref:10678 . 2002 MULLER MARTINI 0249 LOOP (pair) Ref:10677 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10676 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10675 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10673 . 2010 MULLER MARTINI 0249 LOOP (pair) Ref:10674 . 2010 MULLER MARTINI 0249 LOOP (single) Ref:10679 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10683 . 2010 MULLER MARTINI HK75 (pair) Ref:10685 . 2010 MULLER MARTINI HK75Q (single) Ref:10681 . 2005 MULLER MARTINI HK45 NARROW (single)

Condition: excellent (used), Year of construction: 2007, Ref: 10815 . 2007 Muller Martini 3215 Ventura High speed, fully automatic sewing machine Features: High range of product sizes Papers from 22 gsm Feeder and/or knife opening Innovative sewing system Patented loop formation with compressed air Quick change between different type of stitches Equipped with: Suction opening 4 + 4 for products with or without over fold Fodpfxet Sybce Adceph Optical scanning system Additional parts for processing of thin printing Stacker delivery Max signature length: 510mm Max. speed: 12,000/hour

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up. Fedpfxjyr Tlce Adcsph

Year of construction: 1989, condition: used, A used CNC- lathe in good condition with NUM- CNC control Chip conveyor, coolant unit, hydraulic power chuck, jaws and tool holders Fodpfjflhcmsx Adcoph turning diameter over bed 360mm Turning diameter over support 260mm Max. turning length 625mm Spindle speed 3500 rpm spindle passage 42mm Tech. Data and dimensions: Errors excepted. Further tech. data see pdf.- document

Condition: used, pressure 35 t Fpedpfxoykb Dqj Adcjh throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m