Used Movitrac Inverters for sale (1,687)

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Pedpezdtflofx Abgjgn Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer you a conveyor spray processing machine from Mega Electronics. Mega Electronics conveyor spray processing machines Conveyor spray processing machine FAPC 3000 The new FAPC models were developed to work with the latest development, etching, and stripping chemistries for the production of printed circuit boards, metal signs, and chemically milled metal components. The FAPC 3000 can accommodate panels with a width of up to 300 mm. Process chamber 450 mm Water rinsing chamber 280 mm Spray bars – Top 4 process chamber, 1 rinsing chamber Spray bars – Bottom 4 process chamber, 1 rinsing chamber Nozzle type: Poly v-jet – removable with ¼ turn Nozzles per tube: 3 + 4 for process, 4 for rinsing Nozzles: Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control: Adjustable over the entire range from top and bottom. Conveyor speed control: High torque. AC drive motor system, powered by a precision inverter with digital displays for precise operator reference. Speed range: 45 mm - 1.6 m / min Temperature range: Ambient temperature to 50°C ±1°C Temperature controller: Digital Liquid level sensors: For heating and pump Manual reset of the over-temperature protection Voltage: 220 / 240V 50Hz (13A plug) Pjdpfezdqbwex Abgsgn Dimensions: Height: 670 mm Depth: 670 mm Length: 1430 mm Including drip tray Type: FAPC 3000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert Pgjdpfx Ajwcx Rmjbgon Type: F4 -Part No.: 16 F4 C1G-M440/2 2 -Power: 23 kVA / 15 kW -Quantity: 1x frequency converter available -Price: per piece -Dimensions: 415/180/H335 mm -Weight: 14.9 kg/pc.

Condition: used, mileage: 517,000 km, power: 330 kW (448.67 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,170 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electric window regulation, navigation system, power mirror, traction control, trailer coupling, General information Number of doors: 2 Registration number: 91-BPH-4 Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Axle configuration Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle 1: Double wheels; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Suspension: air suspension Rear axle 2: Lift axle; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: air suspension Pgjdpfxozghcqo Abgen Weights Empty weight: 21.984 kg Carrying capacity: 6.016 kg GVW: 28.000 kg Financial information Price: On request = Additional options and accessories = - Air horn - Aluminium fuel tank - Coupling - Heavy duty engine brake - Lock diff - Outside temperature display - Parking air conditioning / roof air conditioning - Radio/CD player - Refrigerator - Sleeper cab = Remarks = Leather chears New smart tacho 2 Inverter 220 volt Length chassis 780cm 2x Bed PTO Preperation

Condition: used, Farley Greene Sievmaster Rota 200 stainless steel sieve machine, centrifugal sieve. Basket diameter: 180mm x 810mm. Equipped with a control cabinet with a frequency inverter. Equipped with a mobile frame. Pgodewyfztspfx Abgen See our other listings. VMA Wekerom.

Condition: used, Year of construction: 2013, WP V500 1/2 dough divider 1 or 2 pocket developed for gentle and accurate dividing of a wide range of dough types. Suitable for wheat doughs, rye doughs containing up to 70% rye, and doughs with high water absorption. Doughs with long fermentation times and delicate doughs, with or without filling, can also be processed. year of build 2013 weight range 1 pocket 300 - 2600 grams-cap 1500 ph weight range 2 pocket 150 - 1200 grams-cap 3000 ph Dividing unit Ni-Resist with automatic oiling with 4 fixed dosing valves Voluminator Compact II Discharge conveyor cross 500 mm, with quick-lock system, scraper and catch tray Separate drive on in- and outside conveyor with drum motors Pneumatic discharge flap with plastic scraper Hopper stainless steel inside Teflon coated contents 120/180 ltr. Hopper base Teflon coated Oil catch tray underneath the machine Frequency inverter for variable speed of drive system Operation by means of touch screen Main piston Ni-Resist Automatic switch of in case of no oil Psdpfxszghp Ds Abgsgn Measuring pistons bronze Knife hardened steel Cover plates stainless steel, brushed, with Schmersal safety switches Frame steel, nickel coated Crankshaft and drive rods cast iron, nickel coated pictures BEFORE reconditioning

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Psdpfx Aow Nafkebgegn Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Podpfx Abjw Nadysgogn Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Psdpfxow Tfw Hj Abgsgn Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Pgjdpfx Abey D U A Isgon Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Podpfx Abexc Rmqjgjgn Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Pgodsx Nbzujpfx Abgjn Availability: short-term

Condition: as good as new (ex-display), FN 350 Single-phase EMC filter for motor drives and inverters Compact filter solution for single-phase inverter applications Touch-proof connection terminal Enables compliance with EN 55011/14/22 Compliant with ICE 60950 Frequency: DC - 400 Hz Leakage current: 4.9 to 11 mA Attenuation performance: standard, high Pgjdpfjcdzyrox Abgsn 8 units available

Condition: excellent (used), Frequency inverter Pgedpfx Abefuv Szogjn Manufacturer: Omron Sysdrive Type: 3G3XV-AB004-EV2 Input voltage: 230 V, 50/60 Hz Output current: 3 A Output power: 0.4 kW, 230 V

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 180 mm, number of axes: 5, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M100 CNC processing center was manufactured in 2019. It features a useful working field of 3110 mm in the X-axis and 1620 mm in the Y-axis, designed for high productivity in furniture and panel processing. The machine includes advanced capabilities such as 5-axis routing, drilling, and integrated CAD-CAM software. If you are looking to get high-quality panel processing capabilities, consider the SCM Morbidelli M100 machine we have for sale. Contact us for further details. • Year/usage: Purchased 2019; approx. 2,000 operating hours • Axes/capabilities: 3/4/5-axis machining; drilling (vertical and horizontal on 4 sides), routing/milling, grooving, edge machining; PRO-SPACE safety system • Working area: X 3110 mm; Y 1620 mm; Z passage 180 mm; Y passage 1900 mm; pendulum length 1400 mm • Worktable: TV FLEX 1600 worktable, 6 mobile bars/supports, 6 crossbars; standard bar positions 6–12; mobile bar length 1600 mm; 12 fixed vacuum cups (145 x 145 x 75 mm); prep for 6 pneumatic clamps; 4 pneumatic panel loading/support devices; 8 rear limiters; 8 intermediate limiters; left lateral reference + laser for shaped parts • Structure/motion: Welded steel frame; linear guides with recirculating bearings; X by mobile bars, Y by gantry with rack & pinion both sides, Z by ball screw; CNC-managed positioning • Speeds: Max XY vector speed (PRO-SPACE) 56 m/min; drilling spindles up to 8,000 rpm; electrospindle up to 24,000 rpm • Drilling unit: F23L group with 13 vertical spindles (7R+6L), 10 horizontal spindles (4+3 in X, 2 in Y); integrated X-direction saw Ø125 mm, 2.2 kW; 75 mm pneumatic on/off stroke; inverter for programmable speed • Main spindle: Hiteco JQX 5-axis electrospindle, HSK F63, liquid cooled, ceramic bearings; power class ~10 kW (S6 up to ~15 kW), 24,000 rpm • Tool changers: Rear TRB 14 (14 positions; 350 mm stroke; 115 mm pitch; tools up to Ø240 mm; total 70 kg); Front FAST 14 (14 positions; tools up to Ø130 mm in selected pockets; max 8 kg/tool; total 24 kg) • Control/software: Windows 7; 21.5" FHD display; keyboard/mouse + machine panel; Maestro CNC CAD/CAM (parametric/graphic programming, DXF import, ISO graphics, simulation); TECPAD 7" mobile touch pendant; remote control along machine • Vacuum: Standard vacuum pump (machine standard); centralized automatic lubrication • Utilities: Installed power 23 + 28.5 kVA; compressed air 450 NL/min; dust extraction requirement 4500 m³/h, 25 m/s, outlet Ø250 mm; centralized/optimized extraction with adjustable conveyor and grouped outlets • Safety/standards: PRO-SPACE concept (no front photocells/side fences per offer), CE conformity, emergency stops and guarded areas as per EU norms Podezgcc Eepfx Abgsgn Additional equipment • Additional vacuum pump: 1 x 90 m³/h • Additional hardware key for Xilog/Maestro (USB)

Condition: used, axle configuration: 1 axle, first registration: 07/2008, total length: 9,540 mm, total width: 2,550 mm, suspension: air, tire size: 215/75R17.5, wheelbase: 4,800 mm, color: black, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Toolbox = Notes = GS semi-trailer. First registration: 16-07-2008. Maximum weight: 11,000 kg. Insulated walls. Victron inverter. Kabola heating system. Air conditioning. Battery pack, 4 x gel batteries. 1500-liter fresh water tank. Pgjdpexz D Ursfx Abgen 2 x 800-liter grey water tanks. Kitchen equipped with: Stovetop. Microwave. Combi oven. Large refrigerator with freezer compartment. Seating area with speakers and TV. In the upper section, the camper is equipped with: Shower. Sink. Toilet with ventilation. 2 x double sleeping spaces, both sleeping areas are equipped with: Storage space. Lighting. Roof window and side windows that can be opened. Various 220V power outlets. Under the sleeping area is a workshop, which is equipped with: Lighting. Workbench. Cabinet space. Drawers for small tools and materials. Sink. Refrigerator. Various 220V power outlets. On the right exterior side, the camper is equipped with an electric sun awning. TV with speakers. = Further information = Tire size: 215/75R17.5 Brakes: Drum brakes Suspension: Air suspension Unladen weight: 4,210 kg Payload: 6,790 kg GVWR: 11,000 kg Price: On request Model number: CAMPER TRAILER / MOBIL HOME = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: good (used), mileage: 122,802 km, power: 96 kW (130.52 HP), first registration: 04/2018, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 2, total length: 5,700 mm, total width: 2,100 mm, total height: 2,650 mm, loading space length: 2,810 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, traction control, trailer coupling, = Additional Options and Accessories = Podpfxjzd Rv Is Abgsgn - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1591 kg, Unladen weight: 1909 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2500 kg, Trailer coupling, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Turn signals, Engine power: 96 kW (129 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Rear step, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Double door, Workshop equipment, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, L2H2 Air conditioning, Tow hitch, Navigation, Camera, Auxiliary heater, Inverter 220 Volt, Crane 75 KG, Euro6, 131 HP!, Spare wheel, Spare wheel tread: 3%, Tire type: Winter tires = Additional Information = General Information Number of doors: 1 License plate: V-229-JZ Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 5 mm; Tire tread right: 4 mm; Suspension: Coil spring Axle 2: Tire tread left: 3 mm; Tire tread right: 7 mm; Suspension: Leaf spring Weights Unladen weight: 1,909 kg Payload: 1,591 kg GVWR: 3,500 kg Functional Loading area height: 70 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2

Condition: used, mileage: 94,089 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 01/2018, emission class: euro6, color: white, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: * Drive type: All-wheel drive, * Rear differential lock, * Mounting rails for roof racks, * Heated rear window with windshield wiper, * High cargo area partition with sliding window, * Driver's seat with height adjustment and lumbar support, * Double passenger seat, * Heated driver and passenger seats, * Rear windows tinted, * Tow hitch, * Workshop equipment, Technology: * Headlights and taillights LED, * Electrical package 1, * Audio system Composition Audio (radio, SD card, MP3), * Driver assistance system: Parking assist (rear), * Mobile phone interface Bluetooth, * Multifunction display Plus, * Inverter Cotek SP 3000 Safety/Environment: * Airbag driver/passenger side, * Side airbag / head airbag (curtain airbag) front, * Driver assistance system: Brake assist (HBA), * Driver assistance system: Multi-collision brake, * Low emissions according to emission standard Euro 6, Other: * 1 previous owner, * German original delivery, * Engine 2.0 L - 110 kW TDI, * Wheelbase 3000 mm, * Truck registration, * Gross vehicle weight 3.20 t Pgjdpfx Aszg Rtxebgjn Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles from the areas of vans, commercial vehicles, and construction machinery in stock! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally without a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: Podoyk I U Aepfx Abgsgn 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Pgsdpfx Asvvi N Iobgjn

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Podovvi Scopfx Abgjgn

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Podpjw Dcb Ssfx Abgjgn

Condition: used, mileage: 344,050 km, power: 110 kW (149.56 HP), first registration: 12/2017, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Vehicle No.: 2175 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles available immediately. Largest selection – best price. More than 1,000 satisfied customers per year – top customer ratings. Pgjdpfx Abezf Inwogon WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to see the vehicle completely, inside and out: Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Volkswagen Next service due in 13,500 km Like-new rear brakes Automatic transmission Ambulance/patient transport vehicle (RTW/KTW) Adapted for disabled access Wheelchair ramp Stretcher fastening system O² bottle holder incl. connection Blue light & siren Inverter Rearview camera Cruise control Climatic air conditioning Upon request, we offer an optional trailer coupling retrofit for only 599 euros. ---- Special equipment: * Composition Audio audio system (radio, SD card interface, MP3 playback function) * Loudspeakers (2) * Electrical Package 1 * Electrically adjustable and heated exterior mirrors * Electric windows * 2nd battery * Reinforced battery * Electrical interface for external use (CAN data bus) with connection terminal * Windows in the loading/passenger compartment: - sliding front, fixed rear right * Cruise control * Interior release for tailgate/rear doors * Child safety lock in the loading/passenger compartment * Climatic air conditioning (cab) + auxiliary heater (in the loading/passenger compartment) * Mobile phone interface Bluetooth * Fog lights with integrated cornering lights * Spare wheel with road tires * Heated windshield washer nozzles * Mud flaps front and rear * Seat cover/upholstery: Simora fabric * Seats in the cab: armrests, driver's seat * Seats in the cab: driver's seat height adjustable * Seats in the cab: driver's seat lumbar support * Bumpers in body color * Central locking with remote control and interior operation * Auxiliary heater * Permissible total weight 3.20 t (including reinforced 16" steel rims) Standard equipment: Electronic Stability Program (ESP) with brake assist, ASR/ABS, EDS and hill start assist, Driver assistance system: hill start assist, Sliding door trim cover, Airbag passenger side can be deactivated, Airbag driver/passenger side, Anti-lock braking system (ABS), Drive type: front-wheel drive, Exterior mirrors aspherical, left, Exterior mirrors convex, right, Floor covering in the cab: rubber, Driver assistance system: brake assistant (HBA), Driver assistance system: multi-collision brake, Window in the loading/passenger compartment: - fixed, front and rear left, Windshield laminated glass tinted, Gearbox 7-speed - dual-clutch gearbox DSG, Glove compartment lockable, Tailgate with glazing, Rear window heating, Interior filter: pollen filter, Interior mirror dimmable, Body/structure: standard station wagon, Body variant: normal roof, Fuel tank: 70 liters, Steering column (steering wheel) adjustable, Engine 2.0 L - 110 kW TDI, Non-smoker package, Wheelbase 3400 mm, Tire pressure display, Diesel particulate filter, Low emissions according to emission standard Euro 6, Sliding door loading/passenger compartment right, Power steering, Start/stop system, Daytime running lights, Door storage compartment front.

Condition: new, ROGI BAND SAW MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw blade dimensions ----- 3770 x 34 x 1.1 mm Saw blade speeds ----- variable 20-80 m/min. Motor power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity at 90° ----- 355 mm / 490 x 300 mm Cutting capacity at 60° ----- 230 mm / 180 x 220 mm Cutting capacity at 45° ----- 350 mm / 290 x 340 mm Cutting capacity at -45° ----- 290 mm / 250 x 250 mm Pgodpega Tzxjfx Abgsn INCLUDED Saw blade Workpiece stop Base cabinet Pressure gauge for saw blade tension Saw blade guide with carbide inserts Hydraulic quick-release clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic shut-off

Condition: good (used), functionality: fully functional, mileage: 394,524 km, power: 125 kW (169.95 HP), first registration: 10/1999, fuel type: diesel, empty load weight: 6,220 kg, maximum load weight: 1,270 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 4,200 mm, next inspection (TÜV): 12/2026, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, loading space length: 3,950 mm, loading space width: 2,430 mm, Year of construction: 1999, operation weight: 7,490 kg, Equipment: ABS, additional headlights, airbag, all-season tires, cable winch, central locking, crane, cruise control, differential lock, fog lights, hydraulics, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, summer tires, trailer coupling, truck registration, winter tires, Model: 817/42AT7 First registration: 12.10.1999 Mileage: 394,524 km (original) Engine power: 125 kW Engine displacement: 4,250 cm³ Crane model: PALFINGER PK 5000 B WINCH 3x hydraulic extensions 4x hydraulic outriggers/legs Rear legs extendable Maximum lifting capacity: 2,500 kg Maximum outreach: 8.7 m with 450 kg at hook end Year of manufacture: 1999 PTO or Hydraulics ALUMINIUM TOOLBOXES STORAGE SPACE/PIPES UNDER THE PLATFORM GOOD WINTER TYRES GOOD SUMMER TYRES EQUIPMENT FOR TRANSPORTING LONG POSTS 3-SEATER 230-Volt inverter Auxiliary heater Antennas Radio/Cassette/CD/MP3 1x air-suspended seat with seat heating, fully adjustable 1x sleeper berth Electric window lifters Electrically adjustable exterior mirrors Sun visor Work lights Fog lights High beam Hazard warning light Stowage box Aluminium fuel tank Emission class: EURO2 Retarder/Intarder/Engine brake Drive configuration: 4x2 Differential lock Wheelbase axles 1 and 2: 4,200 mm Tyre size axle 1 (front): 215/75R17.5 Tyre size axle 2 (rear): 215/75R17.5 Leaf spring suspension / leaf spring suspension Wheel covers Unladen weight: 6,220 kg Payload/loading capacity: 1,270 kg Permissible total weight: 7,490 kg Overall vehicle dimensions (L x H x W): 715 cm x 275 cm x 243 cm Body dimensions exterior or interior (L x H x W): 395 cm x 42 cm x 235 cm New TÜV and emissions inspection available by arrangement for an additional charge! You are welcome to contact us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. German (Deutsch): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English (English): We speak German and English, but feel free to send us a message in your language! Spanish (Español): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Portuguese (Português): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! French (Français): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italian (Italiano): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Pgodpfezhahnex Abgsn Russian (Русский): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Arabic (العربية): نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! Dari (دری): ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Price is net! We can transfer your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, preparation of export documents and production of customs plates if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for inspecting the condition, dimensions and equipment of the goods/vehicles independently. All information is provided without guarantee. Subject to change, prior sale and errors.