|
6
combined dovetail routing / drilling machine for the simultaneous processing of two frame corner parts per cycle up to dovetails and 2 dowel connections per corner
working capacity up to 60 cycles/h
workpiece height 10 - 120 mm,
work piece width min. 10 mm
working stations:
B2odfkuum
2 x milling cutters, motor 530 Watt (chock for HOFFMANN dovetail tool seize W1 – W3)
2 x drilling aggregate, horizontal, motor 2,2 kW, shaft DM 8 mm
2 x drilling aggregate vertical, motor 1050 Watt, shaft DM 8... more
|
|
1
refurbished (used)
Operating voltage: 380 V
Engine power: 5 / 6 KW
Table height: 800 mm
Table size: L 1800 mm x W 1500 mm
Ykxugx7a
Machine Weight: 1560 Kg more
|
|
5
1994
used
|
|
1
used
5 Stck. Messerköpfe Fabrikat: Karat 3 Stck.:1 Stck.: 100x12x301 Stck.: 100x5x301 Stck.: 100x4x306000-10.000 Upm 2 Stck.:1Stck.: 100x10x301Stck.: 100x8x307600-12000 UpM Hinweis:Die technischen Daten und Beschreibungen sind Abschrift der damaligen Auftragsbestätigung. Daten dienen zur Information und sind nicht verbindlich.
Bk7ap2jpc more
|
|
4
1976
used
Second-hand machine
Built in 1976
State: normal
with rigid spindle
with l/r run
Motor pole shift bar
3000/6000, 4000/8000, 5000/10000 RPM
Bqddrva3
Availability: short term
Location: Solingen more
|
|
4
centre distance 500 mm
Be7ynqh7g2
centre height 220 mm
documentation
Weight 2,4 t
for milling more
|
|
1
The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand whe... more
|
|
2
second hand
Make Aigner
Position 8/9
The integral stop fits every table milling machine.
Bdqzhffg
Assembly and adjustments can be done quickly and easily
can be done without additional tools.
The exact adaptation to tool diameter
and height is achieved through stepless adjustability:
Captive, integrated guide rails always guarantee
a continuous guide surface.
Other safety and work devices,
e.g. Bundix and print module, can be on the side
Recording and mounted on the mounting rail.
The surface i... more
|
|
5
1976
used
|
|
8
1963
ready for operation (used)
Used bench milling machine
Internal machine number m2934
Manufacturer Rex
Type 59 F
Ma. No. 9509178
Bg3wn7yxqy
Year of manufacture 1963
Weight approx. 800 kg
With feed, sliding table and various accessories
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
We would be happy to send you more photos by e-mail.
A forklift/crane for loading is available.
We reserve the right of prior sale.
There is the possibility of expert examination of the articles for s... more
|
|
2
New machine
Year of constr.: 2017
Facilities:
The professional craftsman machine with Swivel Milling spindle and 4 speeds.
Stable steel-cast iron construction
Anodised ALU-Formatschiebeschlitten
Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear
Four cutting speeds from 3,500 to 10,000 min-1, manually adjustable
Right left rotation as standard
Display height and inclination 1/10 mm exactly
Fast and easy speed change about eccentric tension
Solid and precise cast ... more
|
|
1
Kantenbearbeitungsautomat - schleifen/fräsen Fabrikat: REHNEN Typ: KBA Neumaschine Technische Ausstattung:Spannung: 400 V, 50HzAnschlussleistung: 6 kWMotorleistung Kantenschleifaggregat: 3 kWSchleifbandmaß (Kante): 150 × 2000 mmStufenlose pneumatische Oszillation, verstellbar: 30 –130 mmMotorleistung Fräsaggregat: 0,55 oder 1,1 kWMotorleistung Profilschleifaggregat: 0,37 kWSchleifbandmaß (Profil): 30 × 1960 mmMaschinengröße: 1000 × 3600 mmVorschubgeschwindigkeit: 2 –10 m/minMaterialstärke: 10 –... more
|
|
4
edge trimmer for overlapping edges
motor approx. 3,0 kW
tool speed 7000 RPM.
2 pcs suction hoods Ø 80 mm
machine weight approx. 340 kg
Bldocjsiu
machine dimensions (L x W x H) = 1000 x 1250 x 1400 mm
incl. tools
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-location price
• All articles or machines are bought as seen without any entitlement on warranty.
• It is left to the choice of the buyer to view the m... more
|
|
1
second hand
Make Aigner
Position 6
The integral stop fits every table milling machine.
Assembly and adjustments can be done quickly and easily
can be done without additional tools.
The exact adaptation to tool diameter
and height is achieved through stepless adjustability:
Guarantee captive, integrated guide rails
always a continuous guide surface.
Other safety and work devices,
e.g. Bundix and print module, can be on the side
Recording and mounted on the mounting rail.
The surface is coated wi... more
|
|
4
used
|
|
6
1986
used
Jones F16A mobile crane
weight capacity 15250kg
jib length 16.5m 3 part
Efzhhvb7
slew 360 degrees
rear wheel steering means that this crane is highly maneuvrable
legs for additional stability. legs do not need to be down for lift.
engine 6 cylinder dielsel
transmission automatic 4 fwd 1 reverse speed
dims 2430mm x 5530/8430mm
headroom 2640mm
year of manufacture 1986
in use on a daily basis. can be seen working by appointment more
|
|
5
New machine
Year of build 2016
Stable steel-cast iron construction
With rigid spindle
3 spindle speeds from 3500 to 10000 min¯ ¹
Milling spindle with right left rotation
Large dimensioned milling unit of grey cast iron, directly at the table with Extractor hood attached under the work table for a better extraction
Gvtzhs
Solid and precise cast iron table
Fast and easy speed change Leistungstarker motor with 5.0 kW
Standard protection cover milling
Quality made in Italy
Installation informatio... more
|
|
1
MoulderBrand: CASADEITyp: F 25With swiveling milling spindle- stable steel gray cast iron construction - dynamically balanced milling unit anchored to the work table - particularly robust design of the most heavily used machine parts - quiet running with precision aggregates and high dead weight - standard with right-left rotation with electronic blocking when changing - 5 speeds from 3000 - 10000 rpm - speed display on the front of the operator - as standard with MK 4 interchangeable spindle sy... more
|
|
10
extendable table elongations front
electric spindle hight adjustment manual with gauge
electric spindle tilting manual with gauge
spindle blocking from front, electric
fence with metal guides hand wheel adjustment
motor brake
hanging operating panel
incl. user manual, spare part list, electric plans
inkl. feeder MAGGI with 3 rollers, left - right turning and 8 speeds
table dimensions approx. 1100 x 760 mm
tilting angle spindle - 5 bis + 45 Grad
usable spindle length approx. 140 mm
spindle D... more
|
|
1
second hand
Make Aigner
Position 7
The integral stop fits every table milling machine.
Assembly and adjustments can be done quickly and easily
can be done without additional tools.
The exact adaptation to tool diameter
and height is achieved through stepless adjustability:
Guarantee captive, integrated guide rails
always a continuous guide surface.
Bg8x3xrqqn
Other safety and work devices,
e.g. Bundix and print module, can be via the
side mount and mounted on the mounting rail.
The surface is c... more
|
|
5
used
|
|
2
Used machineBuilt: 2000Copying under milling machineThroat 500 mmMachine size: 910 x 600 mmSpindle drive Motor 2,2 kW, 230 VMechanically operated via foot pedalSpindle strokeRevolver depth stop with three positionsRequired suction capacity: 500 m³/hmax. workpiece thickness: 100 mmWeight: approx. 160 kgAvailability: short-termLocation: Hochheim
U7a7lv33 more
|
|
2
used
Starrspindelfräse Fabrikat: OkomaTyp: SF2 7,5 kW / 50 Hz / 80 VTisch: 160 / 74 cmRechts-/LinkslaufStern-Dreieck-SchaltungMotor Baujahr: 1978 1 x Tischverlängerung á 108 cm Spindelumdrehung: 4500 / 6000 / 9000 UpMFrässpindelhöhe: 170 cm Hinweis:Die technischen Daten und Beschreibungen sind Abschrift der damaligen Auftragsbestätigung. Daten dienen zur Information und sind nicht verbindlich.
Bdbrqp3ovh more
|
|
4
spindle moulder with tillable spindle
guaranteed quality at your finger tips - easy-to-use
the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine.
spindle speed readout via LED's
left right turning of spindle
spindle moulder fence with manual adjustment
machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button
carriage on work table for tenoning wo... more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
