Used Nedschroef 4 Die Bolt Making Machine for sale (104,339)

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools Ijdezg D I Njpfx Acpjtn - 6 x tool carts

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Iedpfx Acez N Hxhspstn bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: ready for operation (used), * Brand: Dragon * Surface: 5000 x 1800 mm - 4 decks Isdpfjywm N Tex Acpstn * Driving: E-motor 30 kW * Incl.: springs with springsupport.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Isdpfx Acju Tln Nopetn Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates Iedpfot H Nhhex Acpetn 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: used, • Load capacity 150 kg • Year of manufacture 2013 • Maximum pane/frame size – 1500 x 2400 mm • Machine no. – L-220.1743 Iodpowcm U Hsfx Acpjtn • Price upon request

Condition: new, functionality: fully functional, Year of construction: 2026, The LCW 3000W is a compact and versatile 4-in-1 handheld laser system engineered for high productivity and operator convenience. Designed for industrial use, the machine unites welding, laser cleaning, cutting, and weld seam cleaning capabilities, making it highly suitable for manufacturing, repair, and maintenance environments. This unit is based on a Raycus 3000W fiber laser source and is equipped with an industrial water chiller for stable performance and outstanding reliability. Its touchscreen control system enables rapid parameter adjustments, saving of operating modes, as well as real-time diagnostics and warnings. An additional operator control panel ensures easy modification of parameters during use. The laser head is optimized for both welding and cleaning tasks, featuring optical protection and support for various welding processes, including spot welding, continuous welding, fish-scale welding, and full seam welding. The result is a clean, uniform, and visually appealing weld seam. The machine is also capable of removing rust, paint, resin, oil, dirt, and oxide layers from surfaces. Key Advantages: - 4-in-1 functionality: welding / cleaning / cutting / weld seam cleaning - Raycus 3000W fiber laser source - Handheld laser head for welding and cleaning - 10 m standard optical fiber length (up to 15 m maximum) - Intelligent touchscreen control system - Multi-language user interface - Industrial chiller-based water cooling - Red-light positioning feature - Automatic wire feeder - Supplied with safety glasses, working lens, standard accessories, and a spool of welding wire Technical Specifications: ----- Model: LCW 3000W Laser Type: Raycus Fiber Laser Laser Power: 3000 W Operating Voltage: 380 V Wavelength: 1064 nm Fiber Length: 10 m standard, up to 15 m maximum Welding Speed: 30–120 mm/s Cooling System: Industrial water chiller Ambient Operating Temperature: 15–35 °C Recommended Welding Thickness: 0.5–3 mm Cleaning Width: 0–80 mm Focal Length / Working Distance: 600 mm Applications The machine is suitable for: - Iron - Stainless steel - Aluminum alloys - Other metals Typical uses include: - Welding sheet metal and profiles - Pre-processing surface cleaning - Removal of rust, paint, oil, and oxides - Final weld seam cleaning Ijdsyr D A Ejpfx Acpstn Scope of Supply LCW 3000W machine complete with: - Handheld laser head - Automatic wire feeder - Laser safety glasses - Additional working lens - Spool of welding wire - Complete set of standard spare parts and accessories

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, Number of controlled axes: 4, digital Axis X travel (longitudinal): 6500 mm Axis Y travel (transversal): 1095 mm Axis Z travel (vertical): 800 mm Axis A rotation (vertical rotation): 0° to 180°, continuous Maximum axis X speed: 80 m/min Maximum axis Y, Z speed: 64 m/min Maximum axis A speed: 10,000 °/min Iodpfx Ajzczwuecpetn Electric spindle power in S1: 7.5 kW, 20,000 Maximum electric spindle speed with standard HSK-F Configurable, independent work areas on the axis 9-position tool changer Jaw positioning Number of standard stops: 4

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 Iodpfx Aeb A N T Hscpotn -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 400 kg, controller model: AGIEMATIC T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 350 mm Iodpezpypnofx Acpotn Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Working area Table size: 600 × 450 mm Workpiece dimensions max.: approx. 860 × 620 × 350 mm Workpiece weight max.: 400 kg Electrode weight max.: 100 kg Working tank (internal): approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm MACHINE DETAILS Control system: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Maximum tool length: 190 mm Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Number of fixed stops for profiling: 4 Itjdpfx Aszycltscpen Clamping block positioning: Automatic Maximum profiling height: 300 mm Motor power: 7.5 A-axis: +/-90° continuous

Condition: good (used), Automatic strapping machine Mosca RO-TRP-4 Features: • Can be integrated into any line • Direct transport system with frequency control, adjustable from 0.15 – 0.8 m/s • IFM Ecomat 100 control unit with display • Hot-welding system with electronic heating control • Fully automatic band threading system • Adjustable strapping distance via the control panel • Adjustable strap tension • Band end detection with ejection of remaining material • Automatic ejection of strap rings in case of incorrect strapping • Structure painted blue – RAL 5010 Itjdpfjt Srxgox Acpon The passage opening is 74 cm wide and 53 cm high. Strapping performance: Up to 46 straps / min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 kVA Weight: 300 kg. You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2002, operating hours: 20,000 h, functionality: fully functional, working width: 1,700 mm, type of input current: three-phase, total width: 4,500 mm, total length: 8,030 mm, total height: 2,150 mm, power of the servo motor: 20 W, overall weight: 34,000 kg, input voltage: 380 V, Semi-automatic die-cutting machine. Manual sheet feeding, Ijdszidhbjpfx Acpstn die-cutting section, waste removal section, and palletizing.

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis CNC machining center FOM INDUSTRIE FNC 230, year 2023 Condition: excellent, as new Standard configuration: ▪ Electrospindle 5 kW, 18.000 rpm (ISO 30) ▪ 10 location tool magazine on Left of machine base ▪ No. 2 pairs of pneumatic vices with positioning through the travelling column ▪ Left retractable fixed pneumatic stop ▪ Minimum quantity lubrication (MQL) with pure oil ▪ Manual greasing device ▪ Chip and waste collection tank in base ▪ Perimeter guard system. Retractable front door with automatic opening ▪ Control equipment: POWER-I ▪ Movable control console ▪ Handheld control unit ▪ 24” Display ▪ Licence for FST CAM 4 program Option installed on the machine: ▪ PR205562 Tool length measurement and tool breakage detection device ▪ PR205563 X-FLOW (Automatic orientation of lubrication nozzles) ▪ PR205564 Pair of additional vice swith positioning through travelling column ▪ PR205921 SINGLE WORKING AREA 2 PIECES MACHINING WITH X PAL: - LED bar - SW for profile positioning - SW to view machining cycle progress - Device to measure profile length PR205921 - ''Clock'' time calculation module program user license - Right pneumatic fixed stop Itodpfoz Ey Uajx Acpjn - Tunnel for oversized profile machining - SW to manage oversized machining operations ▪ PR205571 Lubrocooling with minimum use of water-oil emulsion ▪ PR205574 Rear chip collection tanks ▪ PR205576 Horizontal blade assembly cone with blade Ø 150 mm  ▪ PR205577 Centralised automatic lubrication system ▪ PR202971 Wireless optical bar code and QR code reader, complete with software for importing data compatible with Fom protocol ▪ ZP713706 License module Statistics: version for CNC 4-axis. Software for collecting machine operation and productivity data

Condition: as good as new (ex-display), Exhibition machine - 4-way combination - Robland HX310Pro 4-way combination machine Robland HX310Pro, Itodpfjvrvpmex Acpen 3 motors, 2 milling speeds for switching, 3 knife planer shaft, format table 1300mm, absolutely new condition

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Ijdpjhmmfkofx Acpjtn Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening Itsdsz St Uzspfx Acpon – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: used, Punching machine for, e.g., slipcases with many punching dies Itodpfx Ajxw N Ntjcpsn

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Itedpfx Aszbb Rrocpon

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Type: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: used, from a training workshop, cleaned and operational, ready for demonstration Spindle hours: 2,542 hours X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 - 4,500 rpm Feed rates: 0 - 2000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1920 kg Space requirement: approximately 2000 x 2000 x 2100 mm Total power consumption: approximately 7 kVA Central lubrication system Coolant system CE compliant Scope of delivery: – Technical documentation Isdpfx Acjzza Smopetn – Full protection enclosure – LED machine light

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Progressive Press SACMA SP260 5 Dies – Like new – Perfect working condition Available for any test at HBR srl. Completely overhauled Technical information: Number of dies: 5 Heading tonnage: 800 kN Max cutoff diameter at 500N/mm²: 11.5 mm Max cutoff length: 85 mm Max kickout stroke (die): 65 mm Max kickout stroke (punch): 20 mm Speed: 275 pcs/min Power of main motor: 30 kW Die diameter: 54 mm Die length: 90 mm Itsdpfxjwar Efo Acpen Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC)

Condition: new, Year of construction: 2025, total width: 2,250 mm, total height: 1,800 mm, total length: 3,000 mm, warranty duration: 12 months, overall weight: 700 kg, power: 1 kW (1.36 HP), Forest PT 1000 PLUS Automatic Pallet Collating Machine – Polish Manufacturer. The machine utilizes CN nailers for nails in coils. Device description: The collating machine consists of a single work table. Pallets can be collated with maximum dimensions of 1200x1200 mm and minimum dimensions of 1200x800 mm (customization is possible to meet customer needs). Specifications: - Total power: 1000W, power supply: 230VAC - Air consumption: 400 l/min Isdpfx Ajm E Np Uecpotn - Dimensions: length 2750 cm, width 2300 cm, height 1800 cm - Quick adjustment for changing pallet dimensions; the height adjusts automatically, and the boards do not need to be of perfectly uniform thickness. - Easy to operate; any nailing setting can be selected, including the choice of nailing pattern and the number of nails. - Operating manual - CE marked - Operator training - 12-month warranty - Post-warranty service - Machine output is provided upon request. Each device is tested in our facility to ensure 100% operational reliability. We operate a pallet manufacturing facility, which allows us to conduct final tests with the customer. The first machine, designed 9 years ago, was intended for use in our pallet manufacturing facility. This collating machine has been in operation in our facility ever since. Our pallet manufacturing facility has enabled us to create a collating machine that meets the expectations of almost all customers. Our machines have a good reputation among customers, and as a result, customers return to us for subsequent machines, either the same model or for other pallet components. After such extensive experience, we can comment on the machine's performance, reliability, service, output, and the wear and tear of the nailers used in the machines. Video of the Forest PT 1000 Plus collating machine and PT 16 stacking machine in operation: youtu.be/1Rpg1YBN9Fs youtu.be/udiu952ra7g

Condition: reconditioned (used), 4 axes X-AXIS (longitudinal) (mm) 7,700 Y-AXIS (transverse) (mm) 470 Z-AXIS (vertical) (mm) 420 A-AXIS (spindle rotation) 0°–180° Itedpjz R T U Hjfx Acpon ON-BOARD AUTOMATIC TOOL MAGAZINE Number of tools in magazine: 8 Automatic positioning of clamping jaws

Condition: used, Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: MORI SEIKI, controller model: M730BM, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, overall weight: 11,100 kg, Equipment: chip conveyor, With dual pallet, Mori Seiki M730BM control system. Workholding and tooling not included. Iodpfx Acjz Sqrkspetn AVAILABLE: late January/early February 2027.

Condition: excellent (used), FORMAT 4 Tempora 60.06 edge banding machine with glueBox – used Touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond flush-trim cutter with both forward and reverse rotation, glue reservoir located underneath, changeover device for glue reservoir, use of PUR adhesives possible, GLUEBOX, pressure unit with driven roller, miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, corner copying unit with diamond-coated cutter, radius trimming blade, radius trimming blade with motorized positioning, edge trimming blade, program-controlled edge trimming blade, infeed stop, spray system for release agent, spray system for lubricant, spray system for cleaning agent, year of manufacture 2022 ----- Technical data ----- Edge thickness, roll material: 0.4 - 3 mm, Edge thickness, strip material: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm, Feed speed: 10 m/min, Screen diagonal: 15 inches, Dimensions of flush-trim cutter: D 80 x 64 mm, Power of flush-trim cutter: 1.1 kW, Power of miter saw: 0.35 kW, Power of trimming station: 0.75 kW, Dust extraction port Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Overall length: 4,872 mm, Dimensions (L x W x H): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - all settings checked - adjusted according to manufacturer's specifications - complete basic inspection - complete basic cleaning - electrical system checked - pneumatics checked - ready for immediate use Iodou R S Nwopfx Acpotn