Die-cutting machine

KRAUSE-BIAGOSCH Y50-12EM-2-68

Condition: ready for operation (used), Year of construction: 1991, operating hours: 113 h, Heidelberg GTOVS 1991 113 MIOS Stream feeder Baldwin Itedpexc H Rrofx Afaop CPC CP TRONIC WEKO

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. Iodpofmavxsfx Afastp In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Itjdpfxsw D E Rve Afaep Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: used, Year of construction: 1994, Approximately 1.2 million prints Format: 35 x 52 cm Iodpfjxugxgjx Afajtp Available at short notice

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Iedpfx Ajh Akm Tsfaetp

Condition: new, Year of construction: 2024, This tube cutter is suitable for cutting various types of paper tubes. It can automatically cut the long paper tubes produced into several shorter ones according to demand without flattening the thin tubes. Fast pipe discharge speed, high efficiency, smooth cutting surface, no rough edge, light and easy operation, low energy consumption. The machine adopts servo drive, PLC control, CNC touch screen, the system is equipped with compensation system, making the cutting more accurate. This machine adopts fixed knife to cut, the paper tube turns when cutting, the die blade does not move, effectively protect the blade and die, extend the service life of the machine. The size of pipe cutting mould can be adjusted according to customer's requirement. It is easy and quick to replace the mould. The machine can be customized according to the paper tube to meet the needs of the customer site. Specification Paper tube length - 10-1000 mm Paper tube diameter - Ø20-200 mm Paper tube thickness - 1-20 mm Number of cutter - 1 piece Minimum cut length - 10 mm Cutting Mode - Paper tube turn Isdpfx Aertnnyefaotp Feed way - pneumatic (0.4MPa) Operator - 1 person Speed control - servo motor Main motor - 2.2kw Servo motor - 1.5kw Voltage - 380v, 50hz Dimension - 1900*850*1250mm Cutter specifications - Ф83*Ф32*1.2 Weight - 700kg

Condition: good (used), Year of construction: 1997, Heidelberg SM74-2 Year: 1997 Configuration: 2 Colors – Straight Max Sheet Size: 520 × 720 mm Max Plate Cylinder prinitng 460 × 660 mm Condition: Clean, well-maintained Machine Specifications CP-Tronic Alcolor film dampening Technotrans cooling unit Autoplate (automatic plate changing) Ink roller washing device Blanket washing device Suction tape feeder Puncher & bender Grafix Alphatronic dry sprayer Included with the Machine Complete set of rollers Itsdpfx Afjxxaa Ejajp Standard tools Manuals (digital or printed) Test print available before dismantling

Condition: good (used), Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network connection MASTERWORK software: Masterwood system for automatic drawing and programming - Boring, cutting programming with boring cycle optimisation Ijdpfx Afow Emgboaotp Technical data: X-Y-Z axis strokes mm 1670-1330-87 Max displacement speed of X-Y-Z axis mt/min 25-50-25 Working range: width min/max mm 80/1000 - Length min mm 250 - Lenght max unlimited - Thickness min/max mm 10/60 Drilling head: n° 5 X axis independent vertical spindles - n° 5 Y axis independent vertical spindles - n° 2 X axis double horizontal spindles - n° 1 Y axis double horizontal spindle Spindles pitch 32 mm Motor power 1,7 Kw Spindles revolution speed 4000 rpm Sawing unit - Motore Kw 1,7 - Blade diameter mm 125 - 4000 rpm Working air pressure 7/8 bar Overall dimensions mm 2400 x 1990 x 1600 h Weight kg 1300

Condition: good (used), Year of construction: 2010, • Sanding from above and below: with roller and pneumatic sanding shoe units • Double-sided processing of parts: in a single pass • Above-average working speed, reduced workload, excellent surface finish • Working width (mm): 1100 • Feed: 1.5 kW each via frequency inverter • Height adjustment: 0.75 kW each Ijdpfxow A R U Ro Afastp • PLC Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, self-adjustment and automatic start of feed and sanding process

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, color channels: 2, paper weight (min.): 28 g/m², paper weight (max.): 400 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, Equipment: documentation/manual, For Sale: 2 x Shinohara 52 – 2-Color Offset Printing Presses We are offering two Shinohara 52 two-color offset printing presses in good working condition. Both presses are currently in daily operation and are ready for immediate use. They can be purchased individually or as a pair, with preference given to a combined sale. Specifications (per press): Brand/Model: Shinohara 52-2 Number of colors: 2 Maximum sheet size: 520 x 360 mm Minimum sheet size: approx. 100 x 150 mm Paper thickness: 0.04 – 0.6 mm Printing speed: up to approx. 10,000 sheets per hour Drive: automatic, with register control and dampening/inking system Condition: well maintained, still in daily production Additional Information: - Regularly serviced and carefully maintained - Fully operational and ready for production Isdpfxew Tlhlj Afaetp - Ideal for short-run jobs, fast and efficient in 2 colors Both machines to be transferred in a single transaction