Used Nord Inverter for sale (2,202)

Condition: used, mileage: 311,000 km, power: 213 kW (289.60 HP), first registration: 10/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,650 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2017, Equipment: ABS, air conditioning, Manufacturer MAN Model TGM 18.290 4x2 Carrier Supra 1250 nordic Year 2017 Condition Good Serial Number WMAN28ZZ6JY365837 Ref. nr. 198181 Reg. date: 25-10-2017 Last seen: 27-01-2026 Hk: 290 Km: 311000 Bodezyd U Aopfx Al Aoln Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Tank liter: 400 Air conditioning: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22,5 Cover% left 50 - 80% Front suspension: Air Suspension rear: Air Total weight: 18000 kg. Net weight: 10050 kg. Load capacity 7950 kg. Inside length: 8650 mm. Internal width: 2500 mm. Interior height: 2500 mm. Lift Brand: Zepro Lift capacity: 2500 kg. Remote control: ? Refrigerator brand: Carrier Supra 1250 Nordic Refrigerator year: 2017 Engine hours 5451

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery Blodpfsz Dv Uyjx Al Aon - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 442.2 m³/h, pressure (max.): 12.8 bar, type of cooling: air, Equipment: refrigerant dryer, Screw Compressor Atlas Copco GA37VSDFF Bodpfsy Rva Isx Al Aeln Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,614 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kaeser DSDX243SFC, 132 kW with 8.5 bar and 26.90 m³/min. Frequency inverter integrated. New compressor stage installed at around 45,000 operating hours. Blodpfoyhakksx Al Asn

Condition: excellent (used), Catalog number 7807 TECHNICAL DATA - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table dimensions 1900x790mm - height from base to table 830mm - top - 2 rows of pawls/ejectors - 2 smooth, metal feed rollers - saw arbour - 2 feed rollers, pressure rollers - bottom - guide strip - pawls/ejectors - track - electric height adjustment of the machine body Bsdpfx Alszwwvze Aoln - central lubrication - stepless speed adjustment via frequency inverter - feed motor 4kW - main motor 75kW - dust extraction nozzle diameter 2x150mm - overall dimensions L/W/H 2050x1800x1800mm - weight approximately 3500kg ADVANTAGES - German-made - DTR documentation available - used multi-blade saw - very good condition Net price: 58900 PLN Net price: 13700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors Blodez A Ufzjpfx Al Asn modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. Bjdowkdt Njpfx Al Aoln We also have additional components from the same log infeed available.

Condition: used, Technical details: welding current: WIG: 420 A welding current: E: 320 A Bjdov H Ayhjpfx Al Ajln open-circuit voltage: WIG: 59 V open-circuit voltage: E: 42 V weight of the machine approx.: 11,5 kg dimensions L x W x H: ca. 0,85 x 0,4 x 1,0 m Welding rectifier / inverter, on 4 wheels TIG / electric welding Direct current TIG = up to 420 A E = 240 A Protection class IP 23 Air cooling *

Condition: used, Board repacking line Bodpfx Aleykauzo Aeln Manufacturer: PlanSel/Nordautomation Pack chain conveyor Tilt hoist Board elevator Edge cutting system Measurement system Stacker with spacers Outfeed chain conveyor Boards till 6 m

Condition: as good as new (ex-display), Year of construction: 2026, Machine to be exhibited at EUROBLECH 2026: Trade fair – special price! Bsdpfx Aez Hkh Hol Ajln Press force: 1600 kN Stroke: 15 – 110 mm Stroke rate: 30 – 65 /min Ram adjustment: 95 mm Table: 1,100 x 700 mm Ram: 900 x 500 mm Installation height: 460 mm Weight: 12,000 kg Connection: 15 kW Includes: - Fully automatic stroke adjustment, hydraulic overload protection, motorized ram adjustment - Frequency inverter, central lubrication, light curtain - Control system: SIEMENS S7/1500

Year of construction: 2019, condition: used, Technical data: - Manufacturer: Cefla - Type: TR - Year of manufacture: 2019 - Equipped with its own control cabinet - Feed rate setting: approx. 2.2 - 20 m/min. - Emergency stop - Display for Hz frequency inverter Blodjyifv Sepfx Al Aen - Transport length: 1,500 mm - Working width: 1,300 mm - Working height: 900 ± 20 mm - Installed power: 0.8 kW - EX ATEX design - Location: in the warehouse

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Bodpfx Aloz Hib Ss Asln Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued.

Condition: ready for operation (used), Heidenhain UM 112, ID: 325 001-01, SN: 7812209 – including test report, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Bledpfx Alsz Hia Is Aon Note: In the exchange process, your defective unit must not have any mechanical damage, such as cracks or fractures, as these are no longer repairable. In this case, an additional charge of €400, including VAT, will be applied. Attention: You are bidding on a Heidenhain inverter, Heidenhain UM 112, ID: 325 001-01, SN: 7812209, in exchange (exchange service). It has been professionally and completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective unit must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued.

Condition: ready for operation (used), Heidenhain UM 111 inverter, ID: 325 000-01, serial number: 7896171, complete with test report. Professionally overhauled and tested, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Blodpez Hiazefx Al Aon Note: In the exchange process, your defective unit must not have any mechanical damage, such as fractures, as these cannot be repaired. In this case, an additional charge of €300 including VAT will be applied. Attention: You are bidding on a Heidenhain UM 111 inverter, ID 325 000-01, serial number 7896171, for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. 100% functional. Scope of delivery as per photos. In both the repair and exchange procedures, your defective exchange unit must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €300 including VAT will be issued.

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Bjdpozbunkofx Al Asln Extraction air velocity: approx. 30m/sec

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Bedpfjfg E H Ssx Al Asln Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable Bledpfx Ajvkiwbel Ajn with clamp

Condition: new, Year of construction: 2025, Cartridge filter housing – 3 × 30″ – SUS304 Bsdoz Iaynspfx Al Ajln Cartridges 3 Cartridge length (inch) 30 Material SUS304 The inch value refers to cartridge length, not overall housing height. Connections, seals, operating pressure and temperature must be confirmed for the selected version. Image [1] [1]

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Bjdpefg E Ibefx Al Ajln Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right Bodpfx Alexz Dqmj Aeln • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), empty load weight: 2,830 kg, maximum load weight: 15,170 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2021, next inspection (TÜV): 02/2027, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF demountable semi-trailer Twin tires 235/75R17.5 BPW axles Ride height 990 mm Drawbar adjustable in length Multiple units available Bjdez Ihcdjpfx Al Aoln ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! INSPECTIONS ONLY BY APPOINTMENT! #####

Condition: used, Year of construction: 2007, -no machining tools required -spindle replaced in 2018 -NUM control replaced in 2019 -machining dimension X: 5500 mm -machining dimension Y: drilling 1440 mm / milling 1780 mm -safety device: bumpers / protective grating -automatic central lubrication via CNC control -central extraction system -rear tool magazine HSK 63 with 24 positions -chip conveyor -TV-Morbidelli table with 10 supports, L=1500mm -vacuum cups, approx. 15 pcs, X=145/Y=145/H=50 mm + approx. 8 pcs, X=145/Y=55/H=50 mm -positioning aids on Morbidelli table -vacuum cup positioning via laser -vacuum pump, 250 CBM/H -drilling head speed adjustable via machine inverter -CNC control with PC office -prepared for teleservice Bsdpoz Ehvrefx Al Aoln -drilling unit with 30 spindles and 4+2 horizontal spindles -base for vacuum cup attachment to support rail Location: Supplier

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Bljdpfx Alew Dcb So Aon

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bjdpfx Aovvi N Ijl Ajln

Condition: excellent (used), Year of construction: 2017, REF: MM6171 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. Bljdpfx Alew Euzme Asn ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.