Dowel boring machine

Koch Sprint PTP3-L

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg Hodpfxjqu N U Dj Airofl 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing Hjdpfxezib Nio Airofl buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Hfjdpfoznuncsx Airsl Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Hedpfxounvg To Airefl Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Hedpfjt Hmt Iox Airjfl

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Hfedpeidqf Refx Airsl Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: used, machine/vehicle number: 007849, Max. panel width: 1000 mm Hfsdpfxowkfzzj Airsl Max. panel length: 2200 mm Length of conveyor: 9000 mm Panel return for edgebander: Right

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) Hfedjzlbrvepfx Airjl - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Hfsdpfx Aey Exwfjirel Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: AH/117989, Usable working area: X-axis = 3,086 mm Hfsdpfx Aiozy Euqsrel Y-axis = 2,155 mm Z-axis = 100 mm Work table: Gridded table with a phenol resin base, grid spacing 30 x 30 mm Multi-zone vacuum system WORKING UNITS: Drilling unit Vertical spindle in X: 5 Vertical spindle in Y: 2 Additional unit (ATEMAG) Motor power: 2.2 kW Milling spindle: 6.6 kW electric spindle HSK-F63 tool holder Tool changer: Linear tool magazine 13 tool positions Becker pump: 2 x 250 m³/h Control: PC-based BUSellato/SCM control system Handheld control unit WAVE CAD/CAM software (depending on configuration) Machine dimensions: L = 5120 x W = 3420 x H = 2120 mm Weight: 3400 kg