Used Okuma Multus B550 - C 2000 for sale (59,262)

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation Nodpfez Sm Amox Abujwn • Removal of adhesives and resins • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: excellent (used), We are offering a Busch WV 2000 C, NC 0300 B vacuum pump set. The pumps were rarely used and came from a solar factory. Nedpfxsv U Ru Aj Abuown

Condition: ready for operation (used), Year of construction: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Yom: 2010 Turning diameter: 630 mm Turning diameter over top slide: 370 mm Nwsdpfow Ecuuox Abuen Turning length: 2,000 mm

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER Njdjz N Sy Djpfx Abujwn 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW Nwodpfx Aezp Rvlsbujn transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package - NO additional tools included

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material - Warranty available upon request! Nwjdpfew N Rv Tox Abuen - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. Nedjzvrluopfx Abujwn New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: good (used), Year of construction: 2000, Arburg 420 C 1000-250 (2000) Clamping force : 100 t Nsdpfexqcrzsx Abujwn Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g \+ robot TECHNOMATIC

Condition: used, Year of construction: 2011, overall weight: 1,622 kg, load capacity: 240 kg, arm reach: 2,700 mm, This is a used, tested welding robot system comprising a KUKA KR 240-2 2000 and a KRC2 ed05 controller from 2011, combined with a welding unit from SKS Welding Systems. The system is designed for industrial welding and automation applications and is typically used for arc welding, heavy-duty assembly operations, and combined handling/welding tasks. The robot has a payload capacity of 240 kg and a reach of 2700 mm, making it suitable for large-scale workpieces. The system is equipped with an SKS LSQ 4 welding power source featuring wire feeder, welding torch, and a complete hose package. Nwedjy Nfl Dopfx Abuen

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Nwodswq Rpwjpfx Abuen Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: used, RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and finishing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpieces up to a maximum length of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter extraction system Performance: 4 horizontal high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” Njdpfxozklb Ee Abuown More new and used items can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC Machining Centre Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2009 Internal machine no.: 8 Travel ranges: Nwodpfoylkydox Abuon X-axis: 2,000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2,500 x 600 mm Spindle taper: SK 40 Tool magazine: 56 stations Spindle speed: 8,000 rpm Accessories: Chip conveyor AME KB 448 Paper band filter AME PS 120 LTA extraction unit Machine enclosure

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Nwsdpfx Ajt Izafjbuen

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, spindle motor power: 15,000 W, number of axes: 2, Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details. • Spindle: ASA6 mount, 52 mm bar capacity • Chuck: 8" self-centering • Max turning diameter: 220 mm • Swing diameter: 450 mm • Max turning length: 500 mm • Tailstock: Automatic cycle with MT5 rotating center, 5 kN thrust • Software/features: Tool life management; automatic chuck open/close and tailstock advance/retraction during rotation; CNC cutting force monitoring (OSP P300LA-e TEX Kit for X/Z and spindle); IGF Advanced (L) with 3D real simulation; API Library 2 (ON STATUS) • Thermal deformation control: TAS-C (Thermo Active Stabilizer - Construction) • Usage/condition: Very little used (about 8 months of operation) Additional equipment • Chip conveyor: hinge type • High-pressure coolant pump: 0.8 kW, 5 bar, 20 l/min Nedpfo Adp U Hox Abuewn • Parts unloader: parts catcher arm and unloading (applicable with manual preset) • Bar feeder interface: prepared for bar feeder • Tool setter: manual presetting • Tool holder kit: 4 external, 1 front, 3 boring bar holders, 8 bushings, 3 plugs Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Nedpfszg Twaox Abuewn Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2007, Table size 2200 x 1000 mm Longitudinal travel 2050 mm Cross travel 1150 mm Vertical travel 760 mm Nedpfx Abeg Tdavouown Spindle speeds 12.000 rpm Spindle taper ISA 40 Power feed 1 - 8.000 mm/min Rapid speed Z-axe 15 m/min Rapid speed X - Y axis 20 m/min Control Heidenhain IT 530 NC Tool change 40 pcs

Condition: used, Year of construction: 2006, Technical data: Nedpfexzq I Sjx Abuewn Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Nwjdpsz Nxmksfx Abusn Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Nwsdpfx Asyxmyujbujn Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Njdpfx Aexqfi Aobuown Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Njdpfxjx Hn D Rs Abuown Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Nwsdpfx Abepmt Ttoujn Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: reconditioned (used), Year of construction: 2009, The machine, after undergoing refurbishment, is supplied complete with a ZCH3 power unit. Nwsdjy U Ecgopfx Abujn

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Nwedpfx Abom Nb Rieuon >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Nwjdpfx Ajx D S Ekjbuon Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.