CNC Lathe

DMT KERN CD 650 / 2000

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range Lasdpfx Afsu N D Ayjwef T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Lsdpfx Aoyucd Hofwjaf Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, 1 used CNC bed type milling machine with Heidenhain control. Ljdpfjwxxzqex Afwsaf Additionally, rotary table The rotary table has a diameter of 1200 mm. €220,000 – in 2012/2013 rebuilt with a new Rexroth rotary table, fully installed as a C axis. Swivel head is available. A wide range of tools as well as a 3D touch probe are included.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, total height: 3,300 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 28,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, 5-axis machining centre DMG DMF 260-11 Ledpezucm Hofx Afwsaf Year of manuf. 2012 Control Heidenhain iTNC 530 Speed [rpm] 10000 Movement X/Y/Z [mm] 2600/1100/900 Tool holder SK50 Spindle Speed 10.000 U/min Power 44 kW Torque 288 Nm Taper SK 50 Media feed-through Blast air, Coolant 4. NC-Axis Technologie NC-Swicel head Stroke +/- 100° Clamping Hydraulic 5.NC-Axis Technolgie NC-Round table Stroke 360° Diamenter 1.050 mm Clamping Hydraulic Load capaity 1.200 kg Tool magazin 60 stations Rapid travers 40 m/min Chip managment Chip conveyor Coolant mangament Coolant through spindle, 80 bar Positioning sensor Direct scale in all Axis Workpiece measurment Touch probe, Heidenhein TS 649 Oil mist seperator: Media feed-through spindle Blast air, Coolant Process observation Operation mode 4

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor • Tool presetter • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Lajdpfxox D I Rie Afwof Technical Machine Benefits • Max. Turning diameter: Ø 420 mm • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Lsdpfjyn Em Rsx Afwoaf Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, Technical details: Laedpfx Asu Nc Riofwof x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Lasdpfxsh Tnpxj Afwsf

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition. Ljdpjvtrc Sjfx Afwjaf

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Lasdpfx Afezg Nmkswjf Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter