Used Provatec 745 for sale (173)

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Blsdpfx Amjw Tk Udoish Control cabinet: complete with (ABB frequency inverter) Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: new, machine/vehicle number: d24246f092ae53c0e155d19dd, empty load weight: 2,400 kg, maximum load weight: 13,600 kg, overall weight: 16,000 kg, Further information Chassis tandem trailer Welded steel construction with approx. 152 mm high floor assembly, load-oriented and torsion-resistant steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and with guide tunnel at 600 mm intervals, tunnel with guide at the top and sides, tunnel height approx. 45 mm, 4 x swap body corner fittings on 20ft base. 4 x support legs for Jumbo parking height 970 mm, extendable and foldable sideways by 90° with short safety strut and safety catch, bolt safety catch on the frame, stable drop latch as second transport safety catch, -symmetrical arrangement of support legs form A 2 for CWB C 745 / 782 for parking height of approx. 970 mm Reinforcement between the support legs 7 pairs of lashing eyes embedded in the outer frame, 2.5 tons each Heavy-duty pallet stop on both sides, approx. 20 - 25 mm high, with lashing option every 200 mm, loading height reduced by approx. 20 - 25 mm Door stop on the side Impact protection at the rear made of flat iron Floor Screen printing plates approx. 27 or 30 mm thick, manufacturer's choice, for high point load capacity, for forklift axle load up to max. 4400 kg Front wall/front stanchions 2,800 mm high, rest with tarpaulin, steel corner stanchions in volume design, release device for side tarpaulin on front wall Center stanchions 1 pair of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. Insertion slats 3 rows of aluminum V-insertion slats or wooden insertion slats of the manufacturer's choice, 1 additional row/rows of aluminum V-slats Rear wall/rear stanchions Rear corner stanchions, steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, Approval / plates Country of approval: Germany Manufacturer's certificate in accordance with EN 12642 XL Paint finish Hot-dip galvanized frame Front corner stanchions hot-dip galvanized Front wall aluminum Rear corner stanchions Hot-dip galvanized Rear wall white Bljdjkt Ni Uopfx Amioh Tarpaulin RAL 9005 jet black with advertising lettering Attention! These are archive pictures.

Year of construction: 2013, condition: good (used), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm Bodjw E Iumepfx Amijlh • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment • Die-Cutting Plate Size: 1,080 x 760 mm

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm Bodjxzr Hpopfx Amislh • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. Blsdjr Nc Ufepfx Amish There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Condition: used, functionality: fully functional, mileage: 80,622 km, power: 115 kW (156.36 HP), first registration: 10/2006, fuel type: diesel, empty load weight: 4,600 kg, overall weight: 6,500 kg, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: parabolic leaf (spring), Year of construction: 2006, Equipment: ABS, additional headlights, air conditioning, Firefighting vehicle decontamination: Renault Mascott 160 DXi Registered: October 24, 2006 80,622 km (odometer change at 75,000 km) Double cab, 4-seater + storage rack Curb weight: 4,660 kg; Gross vehicle weight: 6,500 kg Tow bar with tow bar 3,500 kg Overall dimensions: 745 cm x 215 cm x 310 cm (L x W x H) Box dimensions: 415 cm x 215 cm Interior box height 205 cm Wheelbase 460 cm Twin tires Aluminum box body Integrated ladder on the side Fully walk-in box Hand crane on the "roof terrace" Air conditioning External power socket 220 V sockets Electrical front door / electric mirrors Rear warning system Area lighting Bsdpfswh Nx Sjx Amiolh Rear tail lift (500 kg) Foldable protective walls at the rear Refrigerator 4-cylinder diesel engine, 2953 cc; 115 kW First-hand vehicle Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: ready for operation (used), Year of construction: 1999, operating hours: 45 h, Man-Roland 204 E OB age 1999 Only 45 Mio RCI 2 - remote controlled inking Rolandmatic continuous dampening Easy plate Blanket washing device - automatic Stream feeder, Powder sprayer Antistatic feeder Bodpfx Amewarb Heielh Technical Data: Maximum sheet size: 52 x 74 cm (20.5 x 29.1 inches) Minimum sheet size: 26 x 40 cm (10.2 x 15.7 inches) Maximum printing area: 51 x 72 cm (20.1 x 28.3 inches) Maximum printing speed: Up to 13,000 sheets per hour Plate size: 605 x 745 mm (23.8 x 29.3 inches) Substrate compatibility: Paper, cardboard, light packaging materials Number of colors: Available in two-color configuration Power requirements: 400V, 50Hz, 42 kW Machine weight: Approximately 13,000 kg (28,660 lbs)

Condition: used, TECHNICAL DETAILS - Number of axes : 6 MAIN SPINDLE - Spindle nose : ASA 8'' A2 - Spindle power : 27 - 42 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 77 [mm] - Max. turning diameter : 550 [mm] - Max. diameter on bench : 920 [mm] Bljdpfxouhbnho Amieh - Max. chuck diameter : 745 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 16 - X/Z stroke : 315 / 800 [mm] - Y stroke : [mm] - Live tools speed : 4000 [rpm] - Live tools power : 16 [kW] COUNTER-SPINDLE - Spindle nose : ASA 6'' A2 - Spindle power : 8 - 14 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 43 [mm] - C axis indexing precision : 0,001 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 45 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2800 x 2020 [mm] - Machine height : 2240 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of working hours : 18656 [h] EQUIPMENT - CNC : Fanuc 31i Model A - 3 colors status lamp - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO III

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Manufacturer: KSB Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Pump weight without motor: 4100 kg Bedpsxb Tvxofx Amiolh Length with motor: 7723 mm

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, overall weight: 750 kg, total length: 1,275 mm, total width: 560 mm, total height: 745 mm, gear ratio: 160, torque: 14,560 Nm, shaft diameter: 125 mm, 1 unit industrial bevel-helical gearbox from Manufacturer: Penig DDR TGL: 21815 Type: 10LA1-224/315 Condition: from stock clearance (likely never used) Maximum continuous torque: 14,560 Nm Gear ratio: i = 160 : 1 Exact gear ratio: Efficiency: 97% Transmittable power at: 1400 rpm-(8.7 rpm) = 13.5 kW 950 rpm-(5.9 rpm) = 9.0 kW 710 rpm-(4.4 rpm) = 6.8 kW Oil fill: 85 kg Weight: 750 kg Shaft diameter d1: 35 mm Shaft diameter d2: 125 mm Shaft height h1: 400 mm Bedsxtxphjpfx Amislh Overall height h2: 745 mm Length: 1275 mm Width: 560 mm (without shaft) Large shaft couplings also available!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Bedpfxeyrrpyj Amiolh Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is not dismantled, the potential buyer must include the costs of dismantling.

Condition: good (used), Year of construction: 1997, operating hours: 92,000 h, functionality: fully functional, clamping force: 1,250 kN, overall weight: 6,300 kg, Krauss Maffei KM125-520 C1 Injection Moulding Machine for sale. Including SEPRO robot. With shut-off nozzle and Stäubli quick-clamping system. Clamping Unit: Clamping force: 1250 kN Max. mold opening force: 70 kN Movable platen opening force: 35 kN Movable platen closing force: 28 kN Mounting plate (H x V): 745 x 770 mm Clearance between tie bars (H x V): 470 x 470 mm Mold opening stroke: 600 mm Min. mold installation height: 300 mm Maximum daylight: 900 mm Ejector stroke: 150 mm Ejector force forward/backward: 22/10 kN Injection Unit: Bledpfxow Hyd Ne Amieh Screw diameter: 40 mm L/D Ratio: 23 Injection pressure: 2377 bar Shot volume: 217 ccm Shot weight (PS): 198 g Injection rate: 126 ccm/s Screw speed: 307 rpm Electrohydraulic Equipment: Rated power of pump motor: 18.5 kW Installed heating power: 13 kW Number of cylinder heating zones: 5 Oil filling: 345 l Dimensions and Weights: Space requirement approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6000 kg Max. mold weight: 1485 kg If you have any further questions, please feel free to contact us at any time.

Condition: used, mileage: 635,000 km, power: 324 kW (440.52 HP), first registration: 07/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, Volvo FM 440 / 6x2 Platform 7,45 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 635 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION TIPPER: 745 x 247 x 60 cm (L x W x H) CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 13R22,5 WHEELBASE: 575/135 cm SUSPENSION: AIR CRANE: HIAB 288 E - 8 HIPRO + REMOTE CONTROL TEL: Bsdpfxjyu Hk De Amijlh * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 70247

Condition: new, functionality: fully functional, grinding wheel diameter: 400 mm, Equipment: documentation/manual, Impeller mounted on ball bearings ensures quiet, smooth operation and long service life. Powerful drive motor with high torque. Adjustable guards made of durable plastic provide effective spark protection. Standard equipment includes 35 mm suction nozzles, with provision for dust extraction connection. Bsdpfoyt Hvwsx Amijlh Robust, modern design and a very wide range of additional accessories. Adjustable workpiece support rests. Modern LED lighting. Large spark protection covers. Bases shown in the photos are optional equipment available at extra cost. Technical Specifications Disc/wheel diameter: 400 mm Disc/wheel thickness: 50 mm Disc/wheel bore: 127 mm Disc/wheel grit: G 36 / G 80 Maximum rotational speed: 1450 rpm Motor power: 7.5 kW Motor power S1 100%: 5.5 kW Voltage: 400 V Dimensions - width: 745 mm Dimensions - depth: 540 mm Dimensions - height: 510 mm Weight approx.: 114 kg

Condition: new, column diameter: 260messurements (LxWxH): 1725 x 745 x 2550weight approx.: 1800drilling performance: Stahl (S235JR) - 42Drilling table T-slot size: 19Drilling table T-slot spacing: 171Clamping table length: 635Clamping table height: 415connected load: 4Maximum spindle to drilling table distanc: 1270speed range: 37 - 1253Number of speed ranges: 12Machine FeaturesFunction & ApplicationVersatile application range, e.g. drilling, reaming, tapping Forward and reverse rotation Drive & ControlElectrically braked motor 24V DC electrics and 2-channel safety circuit according to DIN EN 12717 Clearly arranged control panel All axes are manually clamped Structure & DesignHeavy, solid, high-quality cast construction Thick-walled cast column for high smoothness and stability Rigid, high-strength boom construction Large reach thanks to horizontally adjustable machine head Massive, precise drilling table with generous dimensions Hardened and ground clamping table with parallel T-slots Elaborately designed column swivel with optimized clamping for maximum stability and minimal clamping offset Drill head and column can be clamped or released together or separately Movement & MechanicsSmooth-running swivel and travel axes Boom height adjustment via powerful motor drive and lifting spindle Boom guideways hardened and precision-ground Drill head gearbox runs in oil bath Gear wheels made of hardened and precision-ground chrome-nickel steel, ensuring quiet and smooth operation Additional EquipmentMachine light Bodpfx Ajwrukzjmiolh LED lamp Overload protection Coolant system with integrated tank in the machine base Model VersionsRD 4 / RD 5

Condition: new, capacity: up to 1 000 kg/h power: drive Motor: 0,75 kW brush cleaning: 0,37 kW high-pressure cleaner: 4,7 kW electric outlet: 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 2 145 mm Bjdpedix Icsfx Amiolh width: 1 270 mm height: 1 290 mm insertion resp. discharge height: 1 290 mm belt width: 580 mm spread width: 240 -460 mm spread height (9 stages): 10 - 50 mm weight: 665 kg material: 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuous): 2,1 - 5,5 m/min lead time: 0,6 - 1,6 min water consumption for cleaning: 3 l/min connections: sewage Connection: DN75 juice discharge Connection: 1 ½ “ juice discharge height: 305 mm sewage discharge height : 86 mm pomace discharge height: 745 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN Bljdpfx Amsx Avhyjioh - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Bedpexqx Avjfx Amislh Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: refurbished (used), Year of construction: 2003, container length: 23 ft, color: white, overall weight: 16,000 kg, maximum load weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 45 m³, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, MOBILE BOX IN PLYWOOD 745 REPAINTED IN WHITE RAL9010 REAR DOOR WATERTIGHT 2 UNITS AVAILABLE Blsdpjw Hm S Tefx Amieh RAILWAY APPROVAL

Condition: new, Year of construction: 2026, The CORMAK WS32BC bench drill press is a precision column drill for metal, equipped with automatic spindle feed and a cooling system, designed for demanding drilling and tapping operations. With its 8-speed gearbox, rigid construction, and extensive equipment, it is perfectly suited for intensive industrial use. Key Advantages Automatic spindle feed with adjustable speed up to 110 mm/min – improves ease of operation and ensures repeatable machining results Bodpjrigaqsfx Amiolh Integrated cooling system – protects tools from overheating and enhances machining quality Tapping function – automatic spindle reverse enables efficient thread cutting up to M24 High structural rigidity – 100 mm diameter column and heavy-duty base effectively reduce vibration 150 mm spindle stroke – allows deep drilling without interrupting the cycle 8-speed gearbox – range of 140–1960 rpm for precise parameter adjustment Enhanced safety – spindle and belt guards with limit switches, CE compliant Design and Technology The CORMAK WS32BC bench drill press is built from seasoned, precision-machined cast iron components. The spindle and transmission shafts are made of hardened steel to ensure durability and wear resistance. The MK3 Morse taper allows quick tool changes and compatibility with a wide range of drills and taps. The stable worktable, rotatable 360°, facilitates machining of workpieces with various shapes and dimensions. Precision and Performance Thanks to the automatic feed system and integrated cooling, the WS32BC ensures high hole quality and significantly reduces machining cycle times. The 1.1 kW main motor and 0.12 kW feed motor provide efficient operation even under heavy loads. The machine is ideal for drilling, reaming, and tapping in steel, cast iron, and alloy materials. Applications The CORMAK WS32BC automatic feed drill press is an excellent solution for: tool rooms and metal fabrication workshops maintenance departments manufacturing plants technical schools and training centers Standard Equipment Keyed drill chuck Drift key for taper removal Cooling system U-type spindle guard with limit switch Belt drive cover with safety switch Technical Specifications Parameter Value Max. drilling diameter (steel) 32 mm Max. tapping diameter (steel) M24 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Feed speed 0–110 mm/min Spindle–column distance 265 mm Spindle–table distance 390 mm Spindle–base distance 745 mm Spindle taper MK3 Speed range 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Number of speeds 8 Table dimensions 380 × 400 mm Base dimensions 645 × 470 mm Machine height 1370 mm Main motor power 1.1 kW Feed motor power 0.12 kW Power supply 400 V Net weight 230 kg Machine dimensions 900 × 500 × 1400 mm

Condition: new, Year of construction: 2026, The CORMAK WS32 bench drill press is a robust and precise column drill for metal, designed for intensive operation in industrial and workshop environments. With high structural rigidity, an impressive spindle stroke, and tapping capability up to M24, this machine is a versatile tool for a wide range of machining applications. Key Advantages Tapping function – automatic reverse rotation enables safe and precise thread cutting 150 mm spindle stroke – allows deep-hole drilling without repositioning the workpiece High rigidity – 100 mm diameter column and stable cast iron base ensure excellent stiffness and vibration damping Belt drive system – five speed settings (280–1875 rpm) for precise speed adjustment to suit the material MK3 Morse taper – compatible with a wide range of drills and taps 360° rotating worktable – with T-slots, manually adjustable Enhanced safety – U-type spindle guard with limit switch and CE certification Design and Technology The CORMAK WS32 metal drill press is manufactured from high-quality seasoned cast iron, ensuring long-term durability and machining precision. The hardened spindle and transmission shafts are highly wear-resistant. A clear control panel and ergonomically arranged operating components improve operator comfort and ease of use. Precision and Performance Thanks to its heavy-duty construction and extended spindle travel, the WS32 ensures stable performance even in demanding applications. The ability to tap up to M24 makes it an ideal solution for machining heavy steel components. Smooth spindle operation and a flexible speed range enhance both drilling and tapping efficiency. Applications The CORMAK WS32 column drill is designed for: machinery and metalworking industries metal fabrication and tool rooms maintenance departments technical schools and training centers The machine enables precise drilling, reaming, and tapping in steel, cast iron, and non-ferrous materials. Standard Equipment Keyed drill chuck Drift key for taper removal U-type spindle guard with safety limit switch Belt drive cover with safety switch Technical Specifications Parameter Value Max. drilling diameter (steel) 32 mm Max. tapping diameter (steel) M24 Column diameter 100 mm Column wall thickness 12.7 mm Spindle stroke 150 mm Spindle–column distance 265 mm Spindle–table distance 390 mm Spindle–base distance 745 mm Spindle taper MK3 Speed range 280, 400, 675, 1140, 1875 rpm Number of speeds 5 Table dimensions 380 × 400 mm Base dimensions 645 × 470 mm Blodpfsrif Udsx Amieh Machine height 1370 mm Motor power 1.1 kW Power supply 400 V Net weight 230 kg Overall dimensions 900 × 500 × 1400 mm

Condition: excellent (used), For sale: ABB dry-type transformer. Type: DTE 100 / 1.1 3-phase dry-type transformer, 50 Hz Year: 2003 Power: 100 kVA Connection: Dyn5 Voltage drop: 5.82% Weight: 745 kg Bodpjx Tzcyofx Amislh Voltage: 400 V Condition: very good

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min Bedei E H Ikopfx Amielh air flow: 189.6 /hour operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm