Used hydraulic single column presses 0-15t for sale (40)

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm Gijdpfx Abjvnwfbedol ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: used, Year of construction: 1995, pressure 6,3 t stroke 300 mm throat 250 mm dayligth 520 mm table surface area 330 x 270 mm Godpfx Aswc U I Uobdeil table height over floor 750 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,2 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, light-guard (make Sick), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Projection: 330 mm -Operation: hand lever -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg Giedpfx Abjw A Rzdjdol

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Godpjudph Ijfx Abdoil

Condition: new, Year of construction: 2021, Design Single column press Number of operating sides 1 side Forces Pressing force max. ( at 250 bar ) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool steel on steel Max. 2 sec. Dimensions Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1850 mm Hall height min. 2.500 mm Total weight of the press without operating materials approx. 1.2 to Gjdpehaqygjfx Abdoil Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Additional information Single column press with 10 T capacity, suitable for continuous shift operation CE certificate Manufactured according to EU standards Operating instructions, technical documents, documentation in German language Robust machine body with solid welded construction, manufactured according to DIN 8651 Low maintenance and reliable Cylinder with induction hardening and chrome cladding Traversing speed 0 - 10 mm/sec. downwards, Opening speed up to 25 mm/sec Starting pressing speed 10 mm/sec, adjustable from 0 to 10 mm/sec. Table size [...]

Condition: excellent (used), Year of construction: 1999, pressing force: 6 t, Used 6Ton Hare C Frame Press For Sale Gisdpfx Asv Ed Udebdel 2 available yet the listing is for 1, if you are interested in 2 feel free to enquire CAPACITY 63 kN MODEL TYPE AL630 SERIAL NUMBER YEAR OF MANUFACTURE 1999 99ALOB0020 TOTAL STROKE 100mm POWER STROKE 25mm TYPE OF GUARD FITTED CONTROL OIL TYPE OIL CAPACITY SHELL TELLUS T15 1.8 LITRES AIR LINE PRESSURE MACHINE WEIGHT MAXIMUM TOP TOOL WEIGHT 6 - 10 Bar 550 kg 50 kg

Condition: used, Year of construction: 1985, pressure 7 t throat 180 mm stroke 100 mm table surface area 320x300 mm ram surface Ø110 mm hole in the table Ø50 mm Giedpfx Absxh Sycjdel table height 850 mm tool hole in ram Ø30 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1300x1300x2000 mm

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm table height over floor 800 mm Giodpfxsv Svbcs Abdjl ram surface 40 mm feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: H80 997, overall weight: 980 kg, - Year of manufacture: 1980 - Fully functional, connected to power, ready for demonstration - Pressing force: 100 kN - Throat depth: 170 mm - Straightening stroke: 60 mm - Table area: 1300 mm + 2x 50 mm x 260 mm Giedpsxnkazjfx Abdol - Table height above floor: 935 mm - Max. oil pressure: 200 bar - Hydraulic oil capacity: 70 l - Motor power: 1.5 kW - Drive power: 2.2 kW - Weight: 980 kg - Machine No.: H80 997

Condition: good (used), Year of construction: 1993, functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN Gsdox Hfc Rjpfx Abdoil throat depth 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Weight approx. 2.5 tons Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m . Equipment and scope of delivery : . Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: new, Year of construction: 2021, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Gjdpfx Abjhma Smsdjil Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm Gjdpowbizysfx Abdjil stroke 400 mm feed down 100 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: good (used), Hydraulic punch type HE - Punching force up to approx. 20t - power approx. 3kW - stroke approx. 100 mm - table dimensions approx. W: 400 mm D: 300 mm - installation height approx. 230 mm - 2-hand safety control - set-up operation by foot switch Other hydraulic and pneumatic punches in stock. Do you need the right punching tool? - Please let us know. Gjded A Tp Topfx Abdjil We will be happy to make you an appropriate offer.

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s Godovut Rmepfx Abdsil working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: excellent (used), Year of construction: 1991, Hare 5BS Hydraulic Press Capacity 7.5T Max Stroke 100mm Bed Area 380 x 200m On Solid well made stand For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78919 Machine Serial Number: 91201811 Gjdpjwfp Sgofx Abdjil Year of Manufacture: 1991 415V Electrics Cost: £3,750.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation Gedsg Igpnspfx Abdjil - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: NEBR-4397, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! ##### Technical details Pressure 15 t Technology stroke 160 mm Machine weight approx. 330 kg oil tank 10 l robust machine body with solid welded construction, manufactured according to DIN 8651 ##### Additional information low-maintenance and reliable due to robust technology Godpfx Abefhcc Iodoil cylinder with induction hardening and chrome plating steel quality: engineering steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 T rotating mandrel attachment, mechanical, with locking, toothed shaft and brake and 220 mm travel hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring back wall projection to the center of the tool holder 280 mm mounting table swivels 180 degrees to the right with 60 mm bore in the center, M 12 T-slots Clearance height between swivel table and slide/turning mandrel guide 450 mm Passage height up to additional table, insertable, 650 and 800 mm Additional table with center hole, 60 mm, insertable, T-slots M12, size 270x200 mm Height of the base with two inserts for additional table 750 mm on the cylinder a pressure plate, hardened, diameter 10 mm bigger than cylinder in the cylinder head tool holder M 30 Pump lever moves from top to bottom Oil tank for 10 L hydraulic oil AW 46 Painting of the machine body: Blue, RAL 5012, pressure paint Painting of the attachments: Anthracite, RAL 7021 hydraulic single-column combination press as a special machine 15 tons, manual (C-press, hydraulic press, hydraulic press) ##### Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: good (used), Maximum pressing force 10 tons. Gedjxr Azfjpfx Abdoil Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: new, Hydraulic punch model EHS-120 Punching force up to approx. 12t. Design and size depending on the requirements profile. Optional with base rigid or mobile, length stops, positioning system, etc... On request, we will provide you with the right punching tool for your area of responsibility. Gisdpfxed Rh A Te Abdjl (pictured machines are equipped with customer-specific tools).

Condition: ready for operation (used), Year of construction: 1982, functionality: limited functionality, machine/vehicle number: Fabrik Nr.2977, total height: 2,300 mm, table height: 850 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 10 t, table width: 400 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 400 mm, stroke length: 110 mm, For sale: Hydraulic press – Manufacturer: Hans Schoen Model: SH-C Year of manufacture: 1982 Pressure: 100 kN Motor power: 3 kW Safety distance: 120 mm Overrun: 15 mm Gjdpfexwaumjx Abdjil Ram pinhole Ø40 mm Safety light curtain not functioning! Condition: The machine was in regular operation until recently and is in perfect working order. This robust hydraulic press from Hans Schoen is ideally suited for a range of industrial applications requiring precise pressing force. It is distinguished by its reliable performance and durability.

Condition: excellent (used), Year of construction: 1984 Gjdpfxjryn S Ae Abdsil Pressing force: 10 t Total pressing area: 300 x 300 mm Stroke: 540 mm Dimensions W x D x H: approx. 900 x 500 x 2150 mm

Condition: good (used), Year of construction: 1989, Work load 7000 Kg Rotation table load 3500 Kg Table height over floor 665 mm Upper mould half can be freely swiveled out up to 180 Gr. Lower mold half can be swiveled hydraulic using push button Lower mould tiltable 2 sides Optimum handling, free working positions All movements are hydraulic controlled Distance between column:930mm Hight under roof: 1035mm Table Length: 1280mm Ram stroke: 1100mm Approche speed: 50mm/min. Working speed: 10mm/min. Return speed: 34mm/min. Table rotation: 270U/mm Length: 2100mm Width: 3600mm Gjdpfx Abswq Rm Ajdeil Height: 3600mm Weight: 8000kg

Condition: new, Year of construction: 2019, machine/vehicle number: DF0277-Rev06, pressure:10 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 210 mm :200 mm :200 mm Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Godpfx Abjffamyjdsil Ram Height:250 mm

Condition: used, pressure 2 t throat 150 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up mm table surface area 310 x 250 mm hole in the table mm table height over floor mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base Gjdpfx Aotzv Hmsbdeil - various press accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: Fabrik Nr.3206, total height: 2,720 mm, table height: 950 mm, total width: 1,300 mm, total length: 1,300 mm, pressing force: 16 t, table width: 300 mm, table length: 500 mm, ram plate width: 360 mm, ram plate length: 220 mm, distance table to ram: 390 mm, stroke length: 165 mm, Equipment: safety light barrier, For sale: Hydraulic press – Manufacturer: Hans Schoen Type: SH-C Year of manufacture: 1983 Pressure: 160 kN Motor power: 3 kW Safety distance: 130 mm Run-on distance: 13 mm Godjxv U Uropfx Abdjil Plunger pin hole Ø40mm Condition: The machine has been in regular operation until recently and functions flawlessly. This robust hydraulic press from Hans Schoen is ideally suited for use in a range of industrial applications requiring precise pressing force. It stands out for its reliable performance and durability.