Used Rapid Hp 205 for sale (11,524)

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Lajdpfx Aex Sq Uvonxsg Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Ledpfx Aszk Npgenxjag Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2018, offer consists of: - punch unit HP-200A Horizon HP-200A punch unit - features: press- and punch - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 356x508mm; min. 120x90mm - punch thickness: max. 4mm - speed: max. 4000 Broschüren/h Lajdpfx Aexr Ahlenxog - power: 230V / 50Hz - 0,68kW - dimensions: 500x770x1035mm - weight: 168kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2002, 3 MONTHS WARRANTY offer consists of: Horizon HP-20A punch unit - features: press- and punch Laodpfxeu Tdmqj Anxeg - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 350x500mm; min. 120x90mm - punch thickness: max. 3,2mm - speed: max/hr. 4050 Broschüren/h - power: 230V / 50Hz - 260W - dimensions: 590x760x1035mm - weight: 200kg

Condition: excellent (used), Year of construction: 2008, operating hours: 12,705 h, power: 265 kW (360.30 HP), gearing type: automatic, fuel type: diesel, first registration: 06/2008, color: other, Equipment: air conditioning, = Additional options and accessories = - 1 fuel tank - ABS - Armrest - Day Cabin - Hub Reduction - Hydraulics - PTO - Radio - Sper - Thick Axles = More information = General information Cab: day Technical information Engine capacity: 7.145 cc Drivetrain Drive: Wheel Axle configuration Brakes: drum brakes Front axle: Differential lock; Steering; Tyre profile: 80%; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction Weights Empty weight: 10.000 kg Carrying capacity: 3.350 kg GVW: 13.350 kg Max. towing weight: 40.000 kg Functional Quick coupler system: Yes Interior Number of seats: 2 Ledpfx Aozwu U Uenxoag Condition Technical condition: very good Visual appearance: very good Financial information Ask about the lease options

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many Laodpfx Aeymf Ilenxsg many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Lasdpfeymf Nvsx Anxog Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories Lasdpfx Aoymf Sksnxjg - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Ledpfx Anjxfb Ikjxjag Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 2009, Power / KW Lajdpfxezcgh Ss Anxjg clamping range 3-5 mm voltage / V

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm Ledpowt Dwaefx Anxsag arm length / mm workpiece height max. / mm Table dimensions: 1200x580mmTable dimensions: 1200x580mm

Condition: good (used), machine/vehicle number: 11528, Year of construction: 2014, operating hours: 9,150 h, load capacity: 4,990 kg, lifting height: 6,880 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, battery voltage: 80 V, fork length: 2,400 mm, front tire size: 355/45-15, rear tire size: 21x8-9, overall weight: 8,091 kg, Equipment: 3rd hydraulic function, 5233296 Serial Number: 516330E00112 Lajdpfx Anszp Hqxoxjg Battery Details: 80V 6PzS 930Ah BJ:2017

Condition: used, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: Laedpfx Aozwg Rusnxjg - Feed - Thread cutting device

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Intermediate block -Bore: Ø 100 mm / Ø 25 mm -Dimensions: see photos -Dimensions: 205/180/H90 mm Ledpozr Hbcefx Anxeag -Weight: 8.2 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 7,000 mm, measuring range Y-axis: 3,150 mm, measuring range Z-axis: 2,400 mm, Coordinate measuring machine in double-arm design Ljdpfxoyla Iwj Anxsag TECHNICAL DETAILS X-axis measuring range: 7,000 mm Y-axis measuring range: 1,600 mm YT-axis measuring range: 3,150 mm Z-axis measuring range: 2,400 mm Probe head licenses License: PC-DMIS, NodeLocked PC-DMIS Option – World Axis PC-DMIS – CAD++ (DCC CMM) PC-DMIS Option – Tool Changer PC-DMIS Option – Wrist PC-DMIS Option – Require Hasp PC-DMIS Interface – Leitz (B&S) Measuring conditions Temperature range: 16 – 26 °C Max. temperature gradient (over time): 1.5 °C/h Temperature gradient (over 24h): 5 °C/24 h Temperature gradient (spatially): 1 °C/m Measuring accuracy MPEe for single arm: 20 + 13 L / 1,000 ≤ 55 µm MPEe for double arm (Yt = 3,150): 30 + 15 L / 1,000 ≤ 80 µm MPEp: 20 µm Measuring technology Probe head: CW43L (continuous) Probe: TP6 Stylus length: 40 mm Resolution: 1 µm Dynamics 3D positioning speed: 52 m/min 3D acceleration: 2.0 m/s²

Condition: used, Year of construction: 1982, Column Drilling Machine GSP type 205 R Spindle: Ø 100 mm Cone CM4 Spindle exit: Ø 300 mm Rotation: from 12 to 1800 RPM Table size: 800 x 400 mm Year of construction: 1982 Maxi distance spindle nose/tablein low position: 700 mm Mini distance spindle nose/table: 250 mm Throat depth: 400 mm Ledpfxjzzv U De Anxeag Cross-table 1150 x 400 mm Drilling/tapping function Automatic spindle advance The manual descent of the spindle is hard (works perfectly in automatic advance) Manual raising/lowering of the table Voltage: 380 V Width: 1300 mm Depth: 1700 mm Total height: 2700 mm Weight: approx 1,5 T

Condition: new, functionality: fully functional, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, SARIS CW 205 113 750 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Side panel height incl. railing: 43cm Loading platform height: 51cm Total weight: 750Kg Payload: 595Kg Unbraked single-axle flatbed trailer KNOTT axle Low chassis Fully welded, hot-dip galvanized steel frame Steel railing Rear side panel foldable and removable 15mm thick, non-slip, and robust screen-printed wood floor and side walls 6 lashing eyes with 400Kg tensile force 13" tires M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Lights at the rear with reversing light and triangular reflectors Plastic mudguards 2x wedge Drawbar OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder Lsdpfx Aezcawgjnxeag -Foldable and removable front panel -Ramps -Tilting loading platform -Gas springs for tilting loading platform -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Flat cover with or without bows -High cover 120cm -Rear supports -Support wheel Further accessories available on request! Plus freight to Gera and vehicle registration document 100 € net Pictures are examples and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist for axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, maximum load weight: 1,105 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 133 1350 2 NEW VEHICLE Internal dimensions: 205 cm x 133 cm Sidewall height incl. railing: 43 cm Loading platform height: 52 cm Gross weight: 1350 kg Payload: 1100 kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350 kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15 mm thick, robust phenolic plywood sidewalls Steel railing Rear drop-down/removable tailboard with tension locks 15 mm thick, slip-resistant, robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg traction force 14" reinforced C-type tyres M+S tires Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog light and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front board - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft lock - Fine or coarse-mesh net - H-frame - Mesh sides in various heights, also available closed - Flat tarpaulin with or without bows - Raised tarpaulin 120 cm - Rear supports Additional accessories available on request! Plus freight to Gera and vehicle registration documents: €100 net. Images are for illustration purposes and may show optional accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. Our workshop operates weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Axle repair specialist, including for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Lederk Ik Hspfx Anxoag Get advice by phone, visit our website, or come by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW - 50, empty load weight: 223 kg, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1000kg Payload: 777kg Ledpfx Ajrk Ikqsnxoag Braked single-axle low loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg pull force each 13" tyres 2x U-chocks Net/rope hooks on frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY PRICE REDUCED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarpaulin with or without bows - High tarpaulin 120cm, openable on all sides - Rear supports More accessories available on request! Plus freight to Gera and vehicle registration document €100 net Pictures are examples and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including caravan axles. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by in person.

Condition: new, functionality: fully functional, empty load weight: 220 kg, maximum load weight: 1,130 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,330 mm, loading space height: 430 mm, suspension: other, tire size: 185 R 14 C, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS MP 205 133 1350 2 NEW VEHICLE Internal dimensions: 205cm x 133cm Side panel height incl. railing: 43cm Loading platform height: 52cm Total weight: 1350kg Payload: 1130kg Braked single-axle low-loader Overrun brake and parking brake by AL-KO 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels Steel railing Rear side panel foldable and removable with tension lock 15mm thick, non-slip and robust screen-printed wooden floor Drawbar wheel 6 lashing eyes with 400kg pulling force 14" reinforced C tires M+S tires Net/rope hooks on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflector OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Foldable and removable front panel Ljdpfx Anogrqy Rexjag -Ramps -SARIS alloy wheels -Complete LED lighting -Anti-theft device -Net, fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Flat cover with or without bow -High cover 120cm -Rear supports Further accessories available on request! Plus freight to Gera and vehicle registration document 100 € net. Pictures are examples and may show optional accessories that are subject to an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles in stock, permanently and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: used, Industrial vacuum filler Vemag HP 15 E A reliable German powerhouse for medium-sized and large butcher shops. Ideal for the production of all types of sausages, frankfurters, pâtés, and processed meat products. Main advantages: Perfect product quality: The gentle conveying system protects the filling material, guarantees a clear cut, and prevents air inclusions. Highest weight accuracy: The precise servo drive portions to the gram, which minimizes raw material loss. Laedpozcazfefx Anxog Versatile: Seamless synchronization with all common clipping machines (Poly-Clip, Alpina), cutting and forming lines. High performance: Processes even very firm and cold masses effortlessly with a filling pressure of up to 45 bar. Technical data at a glance: Filling capacity: up to 14,000 kg/h Portioning speed: up to 700 portions/min. Portioning range: from 5 g to 100 kg Hopper capacity: 250 / 350 liters Control: Vemag PC control (graphic display, program memory)

Year of construction: 1996, condition: used, machine/vehicle number: 7200124-01, For sale is a high-pressure pump from the company Abel, manufactured in 1996. Flow rate: 19 m³/h Lodpfx Anjzwk H Tjxjag Pressure: 10.0 MPa Oil volume: 7.5 dm³ Stroke rate: 420 1/min The pump can be inspected upon request.

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Lodpjzictpsfx Anxjag Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: good (used), functionality: fully functional, axle configuration: 2 axles, first registration: 07/1992, Year of construction: 1992, Equipment: crane, hydraulics, For sale is a robust tandem crane trailer with a HIAB loading crane, type 205-4. The crane was manufactured in 1992 and, despite its age, is in good and functional condition. The crane trailer has only been used sparingly in recent years and is therefore being sold due to lack of use. An inspection and functional test on-site are possible by arrangement. The equipment includes a winch, grapple, remote control with charger, and concrete counterweights. The crane has several hydraulic extensions and hydraulic outriggers. Thanks to its large reach, this combination is suitable for various tasks in agriculture, forestry, construction, and transport. Equipment / Scope of supply: Ljdpfx Anszzzy Eoxoag HIAB loading crane, type 205-4 Year of manufacture 1992 Manufacturer's serial number 3183 Several hydraulic extensions 4 hydraulic outriggers Winch Grapple Remote control including charger Concrete counterweights Tandem axle Loading platform with sideboards PTO drive / hydraulic supply Only the crane trailer with crane and the described accessories is being sold. The tractor shown in the pictures is not included in the offer and will not be sold. The crane trailer shows signs of use and wear corresponding to its age. The tires are partially significantly worn. The condition can be clearly seen in the pictures.

Year of construction: 2022, condition: used, - Model: Classic Line 2 FE - Year of manufacture: 2022 Ledjzrvk Tjpfx Anxoag - Load capacity: 800 kg - Collection capacity: 205 liters - Dimensions: 1,236 x 815 x 360 mm - With grating - Steel construction - Color: blue (powder-coated) - Weight: 64 kg