Used Lynette for sale (135)

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm Itsdpfxjhgw Uxj Addob total power requirement / kW

Condition: used, swing diameter / mm total power requirement / kW weight of the machine ca. / t Center height: approx. 280mm Isdpfsia Rrkox Addotb dimension Length: 1300mm Width: 300mm Height: 560mm Weight: 265kg

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . max durchlass 369 mm Iodpfx Aerfd U Rjddstb

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Iedpfoiv Irlox Addjtb Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: good (used), Fixed steady rest with roller inserts Max. clamping diameter: 200 mm Centre height approx.: 250 mm Ijdpfsx Urvmex Addotb Below: 2 (individual) counter-supports Most likely from a VDF lathe

Condition: used, Steady rest, steady for lathe, travelling type for mounting on lathe carriage. Centre height: approx. 200 mm. Machining diameter: 90 mm. Steady rest base: 60 x 45 mm, Ø 16 mm. Hole spacing: 208 mm. - 2 adjustable bronze guide shoes. Net weight: 6.5 kg. Good condition. Iodpfx Adoxw Rc Iedjtb

Condition: used, bed width 220 mm Isdpfxexn Tw Ae Addstb daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m weight ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m².

Condition: good (used), fixed steady rest from a Heidenreich & Harbeck, Hamburg 430, clearance approx. 140 mm Itedpfx Aoxu A Svjddsb and travelling steady rest for WEIPERT 425

Condition: used, Year of construction: 2000, swing diameter 530 mm 0 620 mm Wheel width 20 mm roll diameter 45 mm total power requirement ohne kW weight 250 kg dimensions of the machine ca. 1,2 x 0,30 x 1,3 m Iodpfowdiwtox Addstb

Condition: good (used), Bezel, steady rest, lynette Itodpfx Aswtl Tcjddjb -Bezel: max. opening Ø 120 mm -Centre height: 180 mm -technical drawing: in the photos -Dimensions total: 390/120/H420 mm -Weight: 12.7 kg

Condition: used, grinding diameter 1900 mm grinding length 6500 mm swing diameter / mm electric control SIEMENS winCC required space 14,0 x 5,76 m total wight ca. 70 t Equipped with digitally programmable controls Lynettes are not available, but they can be custom-made upon request for an additional charge. Itedev N Rccjpfx Addjb Machine manufacturer: NAXOS UNION Machine model: WE1800 x 6500 mm Type: WE1800 x 6500 mm Year of manufacture: Unknown Current location: 58256 Ennepetal (dismantled) Grinding diameter: 1900 Grinding length: 6500 Control type: Conventional (with control panel) Grinding wheel dimensions: 827 mm Wheel speed: 807 rpm Coolant system: Yes Machine length (mm): 14000 Machine height (mm): approx. 2000 Machine width (mm): 5760 Machine weight (kg): 70000 Z-slide speed: 2500 mm/min

Condition: used, Year of construction: 1998, turning length 3500 mm swing diameter 1000 mm centre height 500 mm Ijdpfov Hhv Ijx Addotb turning diameter over slide 600 mm weight of the machine ca. ca. 8,5 t including 2 lynettes and 900mm faceplate

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox Ijdpfx Adexyaf Rsdetb

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 Itodpfolzm Eqex Addsb tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Itsdpfx Asw Uf Hweddob Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: good (used), Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm Itjdpfx Aedna Afeddeb -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Condition: used, Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos Iedpjh Tgdqjfx Addotb -Dimensions: 520/535/H560 mm -Weight: 32 kg

Condition: good (used), Bezel, setting stick, lynette -for: Crankshaft grinding machine Iedpfx Ajg A I Eueddjtb -Technical drawing: see photos Quantity: 1 piece available -Dimensions: 380/85/H200 mm -Weight: 13.4 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm Ijdpjuqf Nvefx Addstb -Weight: 4.1 kg / 3.9 kg

Condition: used, lunette, steady rest, lynette Itodpjuqf Tnefx Addjb -Clamping tool: clamping bracket -Clamping width: 108 mm -Dimensions: see photo technical drawing -Dimensions: 124/73/H130 mm -Weight: 1.8 kg

Condition: used, Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm -Drawing: with the photos -Dimensions: 1000/270/H900 mm Iedpfxed Nrpgo Addstb -Weight: 216 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 142 mm Itsdpfx Adju Rv Svsdeb -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 110/60/H98 mm Iodeuqf S Depfx Addstb -Weight: 1.3 kg

Condition: used, lunette, steady rest, lynette Itodpfx Ajuqf Tbsddsb -Clamping tool: clamping bracket -Clamping width: 101 mm -Dimensions: see photo technical drawing -Dimensions: 117/83/H140 mm -Weight: 1.8 kg

Condition: used, Bezel, stick, lynette -Max. Diameter: 325 mm -Tip height: 405 mm -Edition: ball bearings Itjdpfx Aod Nhivsddsb -Drawing: in the photos -Dimensions: 780/140/H845 mm -Weight: 97 kg