Used Schaublin Sa 125 C for sale (59,597)

Condition: used, Year of construction: 1980, 1250 mm tank diameter / tank height 1000 / 350 mm turning speed range 920 / 1415 U/min voltage 380 V power requirement 1,9 kW volumn 125 Liter weight of the machine ca. 600 kg dimensions 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit Iiedpsxq Hgvefx Am Eea See images

Condition: used, mileage: 707,546 km, power: 350 kW (475.87 HP), first registration: 02/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2019, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle Data * Tractor unit, air suspension * First registration: 02/2019 * Axle configuration: 4x2 * Wheelbase: 3,700 mm ---Engine & Drivetrain * OM 471, inline 6-cylinder, 12.8 l * 476 hp (350 kW) * 2,300 Nm torque * Emissions standard Euro 6 * High Performance Engine Brake * Mercedes PowerShift 3 automatic transmission * Axle ratio i = 2.533 * Predictive Powertrain Control (PPC) ---Chassis & Technology * Rear axle air suspension Iedpfx Amsyfzmbs Esia * Disc brakes front & rear * Electronic brake system ABS / ASR / ESP * Secondary water retarder * Tire pressure monitoring system * Cruise control * Speed limiter 90 km/h ---Assistance Systems * Emergency brake assist * Hill-start assist * Lane-keeping assistant * Attention assist ---Cab * BigSpace cab, 2.50 m wide * Electric lifting roof * Comfort lower bed (upper bed prepped) * Driver comfort seat, co-driver multifunction seat * Velour seat covers * Full wraparound curtains * Carpet flooring * Additional thermal insulation ---Climate & Heating * Automatic climate control * Electric stand air conditioning * Additional hot water heater * Residual heat utilization ---Comfort & Interior * Refrigerator under the bed * Multimedia radio with touch screen * 2-way speaker system * Sun blinds * Numerous storage compartments & drawers * Chrome interior package ---Tanks & Supply * 820 l diesel + 90 l AdBlue (aluminum tank, left) * AdBlue protective cap ---Electrics & Connections * 2× 12 V / 220 Ah batteries * 24 V socket in co-driver’s footwell * 12 V auxiliary consumer outlet * FMS interface (fleet management) * 15-pin trailer socket ---Fifth Wheel * JOST JSK 42 * Low maintenance * Fifth wheel height 150 mm ---Safety & Miscellaneous * Fog lights * Work lights * Underbody cladding (aerodynamic) * Warning triangle, safety vest, first-aid kit * Digital tachograph (VDO) ---* Tire size front axle: 315/70 R22.5 * Tire size rear axle: 315/70 R22.5 * Fuel tank: 820 l * AdBlue tank: 90 l * Gross vehicle weight: 18,000 kg * Curb weight: 7,943 kg * Perm. fifth wheel load: -- * Overall length: 6,157 mm * Next safety inspection due: 08/2026 ---Vehicle number: 11678 ---Errors and prior sale excepted ---All advertising and various markings have been digitally removed. ---We are happy to assist you with all formalities related to purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge: * Trade-in of your old vehicle * TÜV/inspection approval * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transportation * Vehicle registration * Recoveries and vehicle transport --- YOUR VTS TEAM

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: Ijdpjwc R A Iofx Am Eoia The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Iijdpfxswhi Srj Am Esa Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg Iiedpfsb A Rdqjx Am Eea

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric Iisdpfxjb A Rdlo Am Eoa -Replaceable jaws: soft -Weight: 6 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting Isdpfx Ameb A Rkde Ejia -Weight: 65 kg

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS-F 125 Forestry Mulcher / incl. rotary actuator / NEW / in stock & available immediately Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher attachment for excavator mounting, suitable for mulching along riverbanks, in forests, next to railway tracks, and other hard-to-reach areas - Mulches bushes and wood up to 20 cm diameter - Suitable for excavators from 10-20 tons - Compatible with various mounting plates - Drive designed for hydraulic motor depending on carrier’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) Iisdpfxeyii T Ie Am Eea - 27 pieces, spare part number 176.02.005 OPT 465 M-BOOST Bent-axis piston motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood A separate hydraulic unit is recommended for operation. The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses, couplings, and mounting plate. We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden (phone) is happy to assist you. We are happy to provide a financing offer upon request. We are official sales and service partner for Magni telehandlers, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Westtech, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! Empty weight: 780 kg Please contact Marius Herden for further information...

Condition: new, For inquiries about the attachment, Mr. Herden will be pleased to assist you by phone. Iisdpfx Amsyii Tzj Esa Seppi M. BMS 125 Forestry Mulcher / NEW / in stock & immediately available Price: €30,690.00 net / €36,521.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavator mounting - Ideal machine for mulching in hard-to-access areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm Ø - For excavators from 13 to 30 t - For installation on various mounting plates - Drive designed for hydraulic motor, depending on carrier oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge across the entire hood length - Front and rear chain guards - Height-adjustable support skids in sandwich construction, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor stub shafts OPT 465 M-BOOST angled-axis piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required oil flow: 80 - 170 l/min Three hydraulic lines required: supply, return, and drain. The unit is supplied without hoses, connectors, or mounting plate. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden will be pleased to assist you by phone. Financing quote available on request. We are official sales and service partner for DMS, Westtech, Gierking GMT, OilQuick, Weber MT, Holp, Seppi M., Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! = More Information = Please contact Marius Herden for more information.

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm Iodpfxedqzh To Am Ejia sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), ELIN EBG electric motor MUP 125 F04 ZWZ Ijdpfxjwnfnce Am Eeia

Year of construction: 2005, condition: ready for operation (used), A fully equipped bistro is available. Components: 1) Dish conveyor dishwasher. 2) Furniture. 3) Small and large kitchen equipment. 4) Customer furnishings such as tables, chairs, and self-service counters. 5) Refrigerators. 6) Deep fryers and grills. 7) Cash registers and scales. 8) Dishes, plates, etc. 9) Extraction and filtration technology. Documentation available. An on-site inspection is possible. Iiodpfx Ajxc Nhmsm Esa

Year of construction: 2008, condition: ready for operation (used), A round and long moulding machine Eberhardt is available. Moulding length: 1450mm, dough piece weight range: 150g-1500g, moulding capacity: approx. 650-1000pieces/h, machine weight: approx. 650kg. Including additional moulding bell (650g-1750g) and touch panel control. Documentation available. An on-site inspection is possible. Iodpfx Amsx I Rpfo Esia

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit version 1 . 3 used 100% functional Iiodpfx Amei D T D Sj Esa

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 385706, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ijdpfxjnri Euj Am Eoia

Condition: ready for operation (used), Rexroth MAD225C-0100-SA-S2-FH0-35-N1 / R911317252 Servomotor SN:7800406280035,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iijdpfxetzhf Uj Am Eja

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit software / hardware version 1 . 3 used 100% functional Isdpei D T D Ijfx Am Eoia

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit, used, good condition, 100% functional Iodpji D T D Dsfx Am Ejia

Condition: new, Rexroth M-3 SED 6 CK13/350 C G24 N9K73 L seat valve R901257167, unused, 100% functional, scope of delivery as per photos Iijdei Eczrepfx Am Eea

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 378503, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iiodpfenvyh Nsx Am Eoa

Condition: new, Siemens 6SC6100-0BN20 module B C D SN:T-T31257, unused, 100% functional, scope of delivery as per photos Ijdpoxagy Usfx Am Esia

Condition: used, first registration: 01/2016, loading space length: 13,382 mm, loading space width: 2,410 mm, loading space height: 3,157 mm, * SAF axles * Hydraulic loading ramp * Hydraulic supports * Winch * Remote control * Edscha sliding roof system -----Internal vehicle number: 11079----Errors & interim sales reserved WhatsApp support available! Iisdpfxswz Dm De Am Esa If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2007, loading space length: 13,633 mm, loading space width: 2,435 mm, loading space height: 2,871 mm, * Lift axle * Edscha sliding roof * Disc brakes * Tail lift * Unladen weight: 8,850 kg -----Internal vehicle number: 11086----Subject to errors and prior sale WhatsApp support available! If you have any questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp Iiedpfx Aowz Dl Tjm Eea Whatsapp German, English -- Whatsapp German, English, Arabic

Year of construction: 2000, condition: good (used), Brand: SICA Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Iedpfxexu I Szj Am Ejia Year of manufacture: 2000

Condition: good (used), Year of construction: 1994, machine/vehicle number: 027/103, This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm Iiodorgqnrjpfx Am Esa - Cooling length: 6000 mm - Year of construction: 1994