Used Schauenburg Cyclone for sale (250)

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Power: 11 KW Ppjdpfsgphqcsx Abgeu Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. For plastic processing pipes, profiles, injection molding

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA Ppedpfx Abex R An Eogeu 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Pedpfx Aeflq Spobgopu Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Podpev Rpx Sjfx Abgjpu Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: like new (used), Year of construction: 2020, System: 2-phase centrifuge, dewatering system in a double-deck container Manufacturer: Hiller Type: DP45N.422 VA HY Podpfov D Rlysx Abgepu Mach. No.: H6138 Year of manufacture: 2020 System: in a double-deck container, conveyor technology with side swivel conveyor, separate pump technology. System: demonstration system - as good as NEW! Maximum permissible speed: 3500 l/min Permissible Density: 1.3 kg/m3 Inner diameter of drum: approx. 450 mm Material: All parts in contact with the media made of duplex steel Drum material: 1.4470 Drum wall thickness: 11 mm Max. operating pressure: 100 mbar Drum drive: size 200L Power: 30 kW Speed: 3000 rpm V/Hz: 400V, 50 Hz Hydraulic unit: PVRK07521L Power: 7.5 kW Control: FU Seepex pump: concentrate pump MD 006-12, see photos Macerator: Vogelsang, type RotaCut, RCQ-26G inline cyclone, BioCut and RCQ-33G inline cyclone see photos Spiral conveyor: Hiller see photos Polymer plant: GVU Technik Polymer Mix Station - technical data see photos Documentation: complete

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,750 kg, total height: 2,000 mm, total length: 1,560 mm, total width: 1,320 mm, We are a company with over 30 years of experience in trading machines for the plastics industry. All offered machines are available from stock, and we can perform tests on your material. The XC series granulators are designed for shredding both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are available. Control cabinets are built with Siemens components. Material trials with customer samples are possible before purchase. For any questions, please contact us via email or the provided phone number. P&F Wartacz was established in 1990 and today we are the oldest trading company in the plastics processing sector, continuously distributing injection molding machines, granulators, crushers, chillers, conveyor belts, peripheral equipment, and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Motor power (kW): 37 kW Rotor knives (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 The unit can be purchased with extraction and cyclone instead of a drawer. The machine is unused and available immediately, with testing possible before purchase. Ppedsw Inzwepfx Abgou (Several dozen machines in stock)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. Ppsdpferdgkcex Abgsu (dozens of machines in stock)

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. Pedpfx Aborbh U Aegepu We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Rotor width (mm): 480 Motor power (kW): 20 Rotor knives (pcs): 24 Fixed knives (pcs): 2 Pjdoxud Nvepfx Abgopu Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides Pedpfjvh H Dysx Abgopu * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Year of construction: 1999, condition: good (used), functionality: fully functional, Suite arrêt de production, ligne complète de granulation pour matières plastiques comprenant trémie de chargement, vis de chargement, Extrudeuse monovis diametre 105 avec vis forceuse, doseur, puit de dégazage, pompe à vide, filtre à tiroir avec groupe hydraulique, bac inox de refroidissement, sécheur de joncs, granulateur Buhler, tamis vibrant Avitech, soufflerie, cyclone et porte big bag. Vis et fourreau refait en 2021 (facture). Pupitre de commande refait. armoire électrique complète. La vis a un profil généraliste qui permet de regranuler du PE, PP, PS, ABS et PA principalement. Ppodpfxeu E E Ezo Abgju

Condition: excellent (used), Speed (rpm): 1400 Voltage: 3x400V-50 Hz Power (kW): 3 Wheel size, driving wheel (ø mm): 200x100x28 Abrasive belt (mm): 100x1600 Tube diameter (ø mm): 21-76 Extraction capacity (m³/h): 600 With extraction unit Length (mm): 1430 Width (mm): 810 Height (mm): 1350 Net weight (kg): 205 Tube Notcher with Motor Brake - SCANTOOL 100 RSX The Scantool 100 RSX is the ideal tube grinding machine for all types of tubes and profiles. It simplifies welding and delivers a superior finish. The Scantool 100 RSX has been designed with series production in mind, where precision and clean work are required. Typical applications include the manufacture of railings, frames, go-karts, roll cages, wheelchairs, ship fittings, handrails, gates, fences, furniture frames, and stainless steel tube and profile works for the food industry, among others. The Scantool 100 RSX grinds tubes and profiles made from any material in the range of Ø 21 to 76 mm. Built-in powerful extraction Pjdpjw Ew D Refx Abgjpu The Scantool 100 RSX features an integrated high-performance dust extraction unit that removes most of the grinding dust directly at the belt. For the best dust collection solution, the Scantool 100S can be installed directly behind the belt grinder. The Scantool Cyclone 100S is available as an optional accessory. Key advantages of the Scantool 100 RSX tube grinder: • The only tube notcher on the market where the grinding unit can be set to the desired grinding angle • Does not require lateral space when grinding long tubes • Any angle can be set quickly and easily—without the need for tools • Precision grinding of tubes and profiles at any angle • Perfect adjustment of the contact roller to the required diameter • High-quality and robust side guidance • Ideally suited for series production. Original images coming soon.

Condition: used, Used Hosokawa Alpine ZPS 315 for sale. Was used for powder coatings. Includes filter, cyclone, rotary valves, control cabinet, air intake cooler, and much more. Pjdpfowdvt Ujx Abgopu

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Welded construction, grinding tools made of special steel Ppjdpfx Aeqi Hhpobgju The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet

Condition: used, Hosokawa Mikropul ACM 2/3 classifier mill used, with suction filter, suction cooler, fan, cyclone, piping, unfortunately the filter is missing Ppjdpfxovcmc Es Abgou

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Ppodpfx Abeygv Uijgsu

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: Ppjdpfxoyap Ico Abgsu - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Advantages: - Easy to Use - Quick Color Change Pedpfxjggyigj Abgjpu - Easy assembly and disassembly - Cleaner environment

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Psdpfx Abswu Rgqegspu Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 2,528 h, Compressor Kaeser M 56, year of construction 2003, 2528 operating hours, cyclone separator, with additional cooler for air, volume flow 5.6 m³, 4 cylinder Deutz, Ser.No.TP1229014603 Ppjdpsun Rldjfx Abgju

Condition: like new (used), Year of construction: 2021, operating hours: 2,183 h, functionality: fully functional, machine/vehicle number: SR25-055032021, total height: 2,295 mm, total width: 1,510 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 400 V, year of last overhaul: 2024, control voltage: 400 V, operating temperature: 250 °C, input frequency: 50 Hz, space requirement height: 4,000 mm, space requirement width: 2,000 mm, Equipment: documentation/manual, Professional 25 kg Industrial Coffee Roaster SR25 in Excellent Condition. The machine was used lightly in a specialty coffee roasting facility. It has been regularly maintained and operated only by trained personnel. Total production approx. 1,200 kg/month the first year, used only occasionally thereafter. The equipment is no longer in use due to a change in business focus and is available for immediate delivery. Key Features: - 25 kg batch capacity - Precise temperature control - Consistent roasting quality - Quiet and efficient operation Industrial Specialty Coffee Roaster Coffed SR25 (2021) in like-new condition, only ~2,200 operating hours in total. The machine’s condition is like new, with no technical issues, always operated by trained staff. The business is still operational but has switched to larger machines. The roaster has been decommissioned and is stored in a container, so on-site testing is not possible. However, a live video demonstration of the machine is available. Pjdpfx Abjxvxq Rjgepu Technical condition: - ~2,200 total operating hours - Excellent mechanical and cosmetic condition – looks and runs like new - No faults, no repairs, no defects - Regularly cleaned and maintained - Indoor commercial setup Included equipment: - Coffed SR25 roaster (25 kg batch) - Green coffee loader - Destoner system - Cyclone - Coffed afterburner - Control panel - Tools and accessories Full photo and video package available on request Live online demonstration Logistics: Location: Soeborg, Denmark Deinstallation support: Yes Assistance with loading and transport: No

Year of construction: 2004, condition: used, Biconical dryer model SBC-14000 manufactured by LLEAL in 304 stainless steel. Volume: - Total: 1,400 liters - Usable: 910 liters Vacuum group: - ROBUSCHI KRVS-21/S/T-02 liquid ring vacuum pump - PEDRO GIL RVB.22.20.2 rotary piston (roots) vacuum pump - Cyclone - 304 stainless steel condenser - Condenser vessel Documentation: - CE certificate - Operating manual - Drawings - Electrical diagrams Ppsdpfx Asx Uzmhebgeu

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Ppsdpfx Abev Syvqsgou Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: new, Year of construction: 2025, Shot blasting chamber, 7 x 4.5 m, with extraction floor for mineral blasting media (glass, ceramic, corundum, garnet sand, etc.). Magnetic separator, cyclone, media processing, material hopper, Podpfxsd Naafj Abgjpu blasting media refilling system, free-jet compressed air blower, filter system with cleaning function. Walls lined with 4 mm fabric rubber. Roof hatch for crane loading. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on production at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Shot blasting booth with blasting carriage and rotary table for components with a diameter of up to D = 900 mm and a height of 400 mm. Aspiration system for abrasive media with cyclone separator. Extra sound insulation and an inner lining made of rubber with fabric insert. High-quality machine for continuous use in trade and industry. Rotary table with rotary drive, D = 800 mm, for heavy components up to 800 kg. Pneumatic lift-up door. Filtration system with pneumatic cartridge cleaning and dust filter for air discharge into the building. Ppodpfjd Sl Dbsx Abgsu For questions regarding technical specifications, etc., please contact us in writing or by telephone.