Used Schering Dyna-Plus for sale (5,411)

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Ljdpfeyvmq Iex Anxjag

Condition: used, Year of construction: 2023, operating hours: 495 h, power: 186 kW (252.89 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 495, First registration: 12/17/2024_____Price: 175,900.00 Euro net. Standard equipment/technical data: Ljdpfx Anevv Dp Noxoag ENGINE: Maximum power 180/245 kW/hp (ISO 14396), Maximum torque 1100 Nm. Maximum power with power management 194/265 kW/hp, Maximum torque with power management 1178 Nm. 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V. Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. Powercore engine air filter with coarse dirt pre-separation. EasyCare radiator package. Additional fuel pre-filter with water separator. 500-liter fuel tank.

Condition: like new (used), Year of construction: 2009, grinding length: 1,300 mm, grinding width: 650 mm, workpiece weight (max.): 1,200 kg, grinding wheel diameter: 400 mm, table load: 1,200 kg, grinding wheel width: 100 mm, spindle speed (min.): 1,450 rpm, overall weight: 6,000 kg, grinding spindle motor power: 11 W, travel distance X-axis: 1,300 mm, travel distance Y-axis: 550 mm, rotational speed (max.): 1,450 rpm, Equipment: documentation/manual, DELTA MODEL MINI 12 SURFACE GRINDER MAXIMUM GRINDABLE SURFACE AREA 1300x650 ELECTROMAGNETIC CHUCK 1200x500 GRINDING WHEEL DIMENSIONS 400x50x127 AUTOMATIC DRESSING ON HEAD / TABLE TANK WITH PAPER FILTRATION MANUALS Ljdpfx Ajzy Ewrjnxsag YEAR OF MANUFACTURE 2009

Condition: used, Year of construction: 2018, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for printing companies that need to switch flexibly between rigid sheet materials and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine color gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color space: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Year of manufacture: [2018] Condition: Technically and optically in good condition. The machine operated exclusively in a single-shift operation and was regularly maintained. Availability: Available from [immediately] or by arrangement. Location: [83410 Laufen D] Scope of supply: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). Inspection and print tests on site are possible by prior appointment. More pictures or information available on request. Laodpfx Ansz Dr T Sexsg

Condition: used, Year of construction: 2010, operating hours: 4,524 h, machine/vehicle number: 1424, load capacity: 200 kg, overall weight: 3,760 kg, construction height: 2,200 mm, product width (max.): 1,750 mm, enginetype: Electric, manufacturer: Teupen Lajdpfxozcbfxo Anxjg

Condition: used, mileage: 32,764 km, power: 103 kW (140.04 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,673 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and omissions excepted! Lajdpfjzwa Iyjx Anxog Internal number: 1279.9069289 ----EQUIPMENT * Storage compartments - storage compartment above the cab, accessible from the cargo area * Exterior mirrors, electrically adjustable and heated * Seats, 1st row: double passenger seat on the right, with storage compartment, including headrest in the 1st row, height adjustable * Floor coverings: wooden floor and wheel arch lining in the cargo/passenger compartment * Three-point automatic seat belts - with belt height adjustment at the front and electric belt pretensioner for the driver * Electrical interface for external use - function control unit 1 * Suspension/damping, reinforced and stabilization, reinforced * Weight class, front axle - reinforced front axle * Storage: glove compartment with lockable flap, illuminated * Air conditioning with manual control in the cab * Paintwork: solid color * Engine: idle regeneration * Heated windshield washer nozzles, front, and windshield washer fluid level indicator * Side paneling in the cargo area made of plastic hollow chamber panels, up to the roof frame * Seats, 1st row: comfort seat on the left, in the 1st row * Sun visors, two that fold down and swivel sideways, with wide-angle mirror on the passenger side * Stone chip protection for the front underbody * Rear step, across the entire width * Doors: cab doors, additionally with reinforced door hinges on the driver's side * Lashing rails: C-rails on the side walls in the cargo area * Socket: 12-V socket and 4 cup holders in the dashboard * Sockets: 2 12-V sockets in the cab (in the center console) * Radio accessories: 4 speakers - 2 tweeters, 2 woofers * Storage: glove compartment * Storage package 2: roof rack with two 1-DIN compartments and reading light * Driver alertness and fatigue detection system * Towing eye, front * Airbag for driver and passenger - with passenger airbag deactivation * Hill start assist * Three-point automatic seat belts with belt height adjustment and belt pretensioners for driver and passenger * Electronic stability program and ABS * Parking assist in the front and rear area * Gross vehicle weight: vehicle registration with a permissible gross vehicle weight of 3.5 t * Electric windows * Front Assist with warning and braking on vehicles, pedestrians and cyclists * Front-wheel drive * Gross vehicle weight: Permissible gross vehicle weight 3500 kg * Transmission: 6-speed manual transmission * Floor coverings: rubber floor covering in the cab * Halogen twin headlights * Grab handle on the partition in the cargo/passenger compartment * Heating and ventilation system in the cab * High roof, painted in vehicle color on the outside * Radio: Infotainment system with 26 cm touch color display * Headrests (2) * Fuel tank with 75 l capacity * Radiator grille, unpainted * Cargo area lighting: 4 LED spotlights * Steering wheel adjustable in height and reach * Steering wheel: multifunction steering wheel * Headlight range adjustment * Marker lights, side * Telephone: mobile phone connection via Bluetooth with inductive charging function * Multifunction display: Digital Cockpit Pro * Multimedia systems: 2 USB-C ports in the I-panel with up to 45 W charging power * Emergency call system eCall * Without electrical connection strip and without function control unit * Package: fuel consumption optimization package without stone chip protection * Radio Composition with 26 cm touch color display with 4 speakers - 2 USB-C ports in the I-panel with up to 45 W

Condition: used, This listing is for Zeta Plus 16NZA Encapsulated Filter System The unit is in full working condition and ready for immediate use This high-performance, single-use depth filtration asset provides reliable fluid clarification and impurity removal for pharmaceutical and bioprocess laboratory operations. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Lajdezqf Dgjpfx Anxjg Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Laedpfxsxl Dy No Anxjg Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: used, This listing is for the 3M Zeta Plus Laedpfxeyq Ryuj Anxsg

Condition: used, This listing is for Zeta Plus 16NZA Encapsulated Filter System The unit is in full working condition and ready for immediate use. This high-performance, single-use depth filtration asset provides reliable fluid clarification and impurity removal for pharmaceutical and bioprocess laboratory operations. Lajdpfozqf Dasx Anxeg Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 9,100 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 8,440 kg, total length: 5,120 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 159A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 159A8 Rear tire condition: 80 - 100% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2026 Battery condition: 80 - 100% Lasdpfx Aezyxcnenxsg 3rd valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, full free lift, CE certificate, LED, seat Equipment: Classic

Condition: used, Year of construction: 2016, operating hours: 704 h, machine/vehicle number: 3886, overall weight: 4,900 kg, working height: 12,000 mm, enginetype: Electric, manufacturer: JLG Lodpfxszcbkhj Anxeag

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Laedpfx Aozwv Ntenxeg Operation in manual mode is also possible. The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade.

Condition: new, Robust band saw for steel and stainless steel. Double-bevel cuts, up to 60° to the right and up to 45° to the left. 2 speeds: 35 and 70 m/min. Manual lifting of the saw frame, assisted by tension springs. Downward movement is achieved by gravity, dampened by an oil damper with an adjustable throttle valve. Cutting capacity examples: Round: 90°: 235 mm -45°: 165 mm +45°: 185 mm +60°: 115 mm Lasdpfx Aneztu R Isxog Rectangular: 90°: 280 x 180 mm -45°: 185 x 80 mm +45°: 185 x 100 mm +60°: 115 x 80 mm With: Cooling system Vise with quick-release mechanism Mechanical material stop Manometer for saw blade tension Mechanical saw brush - Also available in the ARG 260 Plus version (cutting capacity for round stock: 260 mm) – available from stock!

Condition: like new (used), Year of construction: 2005, Retrofitted: 2026 Lodpfey Az H Dox Anxsag Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2500 x 2000 mmTable construction: Continuous rotation with a hydraulic breakNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1500 mmZ axis traverse: 1300 mmVertical capacity (VC): -5 / 1295 Milling head Auto-indexing Orthogonal 90º - Bodies B C (1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 5000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 20000 mm/min Weight and dimensions Machine weight approximate: 39000 kgMaximum weight on table: 13000 kgMachine dimensions approximate: 7980 x 8000 x 3750 mm Accessories Guarding: Peripheral without roofAutomatic tool changer: ATC-60Chip conveyor: 1 rear longitudinalElectronic handwheel: HR-410Coolant: External internal high-pressure coolant through spindleCoolant filter: Paper strip filter Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,497 h, construction height: 3,270 mm, power: 209 kW (284.16 HP), empty load weight: 9,450 kg, total length: 5,274 mm, construction width: 2,620 mm, Tractor Ledpfxjy U A H Nj Anxsag Speed category: 50 Technical condition: good Battery condition: good

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,257 h, load capacity: 5,600 kg, construction height: 2,965 mm, power: 156 kW (212.10 HP), empty load weight: 7,900 kg, total length: 4,453 mm, construction width: 2,505 mm, Tractor Speed class: 50 Technical condition: very good Battery condition: very good Ljdpfx Anjzc Dbioxoag

Condition: new, functionality: fully functional, Year of construction: 2026, SENFENG SF6012 PLUS – 3kW Fiber Tube Laser Cutting Machine High productivity, efficient material handling and maximum material utilization The SENFENG SF6012 PLUS is a high-performance fiber laser tube cutting machine designed for efficient series production of small to medium-sized tubes and profiles. Equipped with a 3,000 W MAX Photonics fiber laser source, semi-automatic tube loading and the advanced T PLUS overtravel cutting concept, the machine combines high cutting performance with efficient material handling and minimal residual material. Available for viewing, demonstrations and test cutting in our showroom from October 2026. Why choose Besten Machines? ✔ Over 25 years of experience in metalworking ✔ Locations in the Netherlands and Germany ✔ Own Dutch and German service engineers ✔ Installation, commissioning and operator training ✔ Technical support and spare parts availability ✔ More than 70 SENFENG machines successfully installed Machine Configuration 3,000 W MAX Photonics fiber laser source BOCI autofocus 2.5D laser cutting head FSCUT3000DE-A CNC control system Cooling system for laser source and cutting head Power stabilizer Semi-automatic loading system up to 6.5 m Loading capacity for up to 5 tube/profile positions Unloading station with 2 m conveyor Optional 3–4 m conveyor TubesT 3D tube nesting software Fully enclosed, CE compliant Technical Specifications Laodpfxjzwquqe Anxjg Model: SF6012 PLUS Laser power: 3,000 W Laser wavelength: 1060–1080 nm Tube length: 1,000–6,500 mm Round tube: Ø15–Ø120 mm Square tube: 15×15–120×120 mm Maximum tube weight: 120 kg Maximum acceleration: 1.5G Maximum rapid speed: 150 m/min Maximum chuck speed: 240 rpm Positioning accuracy X/Y: ±0.4 mm Repeatability X/Y: ±0.4 mm Power supply: 3×380 V / 50 Hz Protection class: IP54 Dimensions incl. loading system: approx. 9,100 × 2,230 × 2,300 mm Machine weight: approx. 3,400 kg Key Features T PLUS Overtravel Cutting The movable front chuck enables overtravel cutting, minimizing residual tube length and maximizing material utilization. Semi-Automatic Loading Loading system with up to five tube/profile positions for material lengths up to 6.5 m, reducing manual handling while maintaining production flexibility. Servo-Controlled Tube Support Active supports reduce sagging and vibration during processing, improving stability and cutting accuracy. FSCUT & TubesT Software Integrated CNC control combined with 3D nesting software for efficient programming, automatic nesting and material optimization. Automatic Unloading Finished parts are discharged via conveyor for controlled and efficient material handling. Applications Suitable for processing carbon steel, stainless steel and aluminium tubes and profiles. Ideal for machine construction, steel fabrication, furniture production, automotive components, agricultural machinery and general series production. Showroom & Service The SF6012 PLUS 3kW will be available in our showroom from October 2026 for demonstrations and test cutting. Besten Machines provides installation, commissioning, training and after-sales service through our own service team in the Netherlands and Germany. Contact us for a quotation or demonstration. Send us your drawings and material specifications and we can perform a test cut for your application.

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630 mm - max. thickness of workpiece: 250 mm - from above: - toothed feed roller - pressure rollers Lodpfx Anezx Rknsxeag - pressure pad - toothed feed roller, 2 pcs - pressure pad - 4-knife planing shaft, 630 mm, 15 kW - pressure pad - smooth feed roller - from below: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630 mm, 7.5 kW - adjustable feed roller in the lower table, 2 pcs - electric height adjustment - lifting motor 0.65 kW - 6 feed speeds - feed motor 4 kW - diameter of dust extraction nozzle: 2 x 160 mm - dimensions (L/W/H): 1780 x 1850 x 1700 mm - weight approx. 3000 kg ADVANTAGES - new knives installed - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37,900 PLN Net price: 9,024 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 2006, S009758 PROD. ATLASCOPCO TYPE GA45 PLUS S/N API507879 YEAR 2006 Lajdpfx Ansz D Dtkjxsg POWER (kW) 45 CAPACITY (m3/min) 7.73 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 17837/35122 2021.10.29 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no NEW/USED USED

Condition: used, mileage: 23 km, power: 130 kW (176.75 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,640 mm, next inspection (TÜV): 05/2028, color: grey, driver cabin: other, emission class: euro6, number of seats: 7, loading space volume: 7.9 m³, loading space length: 2,320 mm, loading space width: 1,760 mm, loading space height: 1,930 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Tow hitch up to 3.5 tons (optional), navigation via smartphone possible, warranty 5 years or 250,000 km from initial registration (according to the manufacturer's warranty conditions). Body style: High roof in vehicle color, Climatic air conditioning, central locking, exterior mirrors electrically adjustable and heated, power windows front, Multifunction display Plus, Digital Cockpit Pro (digital instrument display), hill start assist, lane keeping assist, emergency braking assistant (Front Assist) including pedestrian and cyclist detection, traffic sign recognition, distraction and fatigue detection, speed control system (cruise control), Intelligent Speed Assist including speed limiter, multifunction steering wheel, parking assistance front and rear, reversing camera, partition, spare wheel with road tires, summer tires, heated windshield, light and rain sensor, LED headlights, LED daytime running lights, digital radio reception (DAB+), infotainment with touchscreen color display 26 cm (10.4 inches), Bluetooth hands-free system with wireless charging function, audio system Composition (radio - touchscreen color display - USB interface), W-Lan / Wifi hotspot, mobile online services App-Connect Wired and Wireless, emergency call system, tire pressure monitoring system, heat-insulating glazing, storage package 2, tachometer, driver airbag, airbag driver/passenger side - passenger airbag can be deactivated, anti-lock braking system (ABS), electronic stability program (ESP), air suspension seat, comfort seats, center armrest, driver comfort ErgoActive suspension seat (20-way seat adjustment - massage function) with armrest and lumbar support, rear headrests, light assistant (Coming Home - Leaving Home), start/stop system, diesel particulate filter, service history available, sliding door loading/passenger compartment right, immobilizer (electronic), headlight range control, exterior temperature display, power steering electro-mechanical, preparation for trailer coupling (socket and cable), tinted windows, paint: Ascot Grey, wooden floor with interior paneling, mud flaps rear, passenger double seat with storage/stowage compartment and backrest that can be folded down to form a stowage table, chassis: dampers and stabilizers reinforced - front and rear, front bumper in grey with trim in vehicle color, trailer stabilization program, mobile phone interface, multimedia interface 2 USB-C (center console) with increased charging power - 2 USB-C charging ports (center - front), truck registration, non-smoker package, storage: 2 DIN compartment in front under the headliner, interior lights in the driver's cab: front reading light, permissible gross weight 3.50 t, underbody paneling with CW value, radiator grille with chrome strip on top, exterior mirror convex - left, exterior mirror convex - right, LED turn signals integrated into exterior mirror, automatic headlight activation, windshield wipers with intermittent operation - adjustable, floor covering in the driver's cab: rubber, entry handle on the rear pillar left, entry handle on the rear pillar right, grab handles A-pillars, remote control key (2) foldable, seat belt warning system (driver/passenger side), interior lights in the driver's cab: LED, interior lights in the loading/passenger compartment: LED, glove compartment with flap, preparation for alcohol interlock (Alcolock), dual-tone horn, sockets (12V connection) in the driver's cab (2 pieces), lashing eyes in the cargo area, brake assi Lasdpfozizbfjx Anxog

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Ledpfx Anjxzq Ncexjag Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2005, Format: 320 x 480 mm Equipment: Quality control: Semko ASIR III Feeder: Number of feeder: 9 x 370 cover feeder 1x 1529 Card adhesive: 1x 423 AMRYS - Automatic Make Ready System Stitching unit: Typ: Prima Plus Amrys 390 2x stitching heads AMRYS - Automatic Make Ready System Lajdpfx Aoyxqvmonxog Delivery: Typ: Rapido 7525 year: 2001 serial number: MMZO 490 194 Display direction: left Technical data: Format min: 90 x 105 mm Format max: 320 x 480 mm Maximum mechanical speed: 14,000 cycles/hour. Three-knife Typ: Mueller Martini 449 AMRYS - Automatic Make Ready System

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Ledpsra Rbgjfx Anxjag Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 400 mm, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M574 was manufactured in 2010. It features a measuring range of 500 × 700 × 400 mm and includes a Renishaw MH20i probe head with a TP20 standard force probe system. The machine is equipped with a granite measuring table and multiple styli for enhanced versatility. If you are looking to get high-quality coordinate measuring capabilities, consider the Mitutoyo Crysta-Plus M574 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 500 × 700 × 400 mm • Probe Head: Renishaw MH20i • Probe System: TP20 Standard Force • Probe Module: Standard Force • Scale Resolution: 0.0001 mm (0.1 µm) • Probe Ball Diameter: Ø 4 mm • Stylus Length: 20 mm • Operating Temperature: +5 °C to +40 °C Lsdpfxszt Nq No Anxoag • Length Measuring Error (E0, MPE): (5 + 6L/1000) µm • Single Stylus Form Error (PForm, MPE): 6 µm • Test Sphere Diameter: Ø 3.994 mm • Automatic Temperature Compensation: No • Calibration Date: 10 March 2026 Additional Equipment • Renishaw MH20i indexing probe head • TP20 probe system • Stylus rack • Multiple styli • Granite measuring table • Machine stand