Used Simat Prm 30.135 for sale (653)

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section Gedpfx Aozyyfkon Isug -Contour / profile cutting section -Cross-cutter section Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a Gsdpezc Rhvefx An Ijug bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Accessories: ruffler and special press ram

Year of construction: 2019, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, operational hours counter: 2169h, with Deduster MHG 1703-2,2 and various accessories. Gujdelubvbjpfx An Ijg

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank Gjdpfx Anjzpxhie Ioug CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, functionality: unexamined, Year of construction: 2001, machine/vehicle number: 3533, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, For sale: a custom-made cutting and marking line (using disc/circular saw) for round and square tubes, manufactured in 2001 by Simec Srl (Schio, Vicenza, Italy). The system consists of a Simec bar feeder "Caricatore BM" (serial number 3587) that feeds the main Simec unit "MEC 120 MI" (serial number 3583), with a disc cutting station identified with the FAT logo. The line includes a workbench with guides and measuring scales, a collection box for cut pieces, and a roller table for material transport. The structure is mounted on legs and features its own control panel (Siemens Simatic OP3 interface and Rovan Elettronica counter/display), manual control buttons, a mode selector, pressure gauges, and a three-phase electrical connection. Gsdszvc Utopfx An Isug Condition: it was in operation until approximately 1 year ago; the current condition has not been recently verified or tested. Inspection/testing by the buyer is recommended before purchase.

Condition: ready for operation (used), Year of construction: 1996, Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Gedpfx Aezvfnion Ioug Quench: Oil/Air Equipment: Control Siemens Simatic

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 Gedpfozvmihex An Ioug • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Guodpfozvnqtjx An Ijg Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: used, Available quantity: 10 units Gusdpfx Anozgaqme Isg 6AV7240-0HC07-0HA0 Siemens Multi-touch display SIMATIC IPC 477D, 15" multi-touch display; 4 USB (rear); without USB (front); Ethernet (10/100/1000); Celeron U827E; 2x Gbit Ethernet (IE/PN); 4 GB; 1x RS-232; without PCIE; Windows 7 Ultimate 64-bit, Replaceable without drive; SSD 80 GB Standard (MLC); Without SIMATIC software; 24 V DC industrial power supply

Year of construction: 2026, condition: like new (used), functionality: fully functional, - inside diameter 900 mm and inside length 2500 mm - door with the locking system (manually) - fan inside the tank with the electrical engine outside - water cooled - 8 vacuum ports - electrical heating about 15 kw coils - Working pressure 10 bar - Adjustable AIR max. working temperature 180 °C - Equiped with related valve and pipes -With an inside trolley and outside cart -With 1 set of installation accessories -With automatic control system - PLC unit is Siemens Simatic S7 -With the installation air accessories Gjdpfxezkwh Dj An Ieug - weight 1300 kg

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Gsdpfszizb Sjx An Ieug Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Malt bill: 2500 kg/batch Operation / Control: Simatic S7-400 Material: Stainless steel Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,484 h, overall weight: 2,580 kg, controller manufacturer: SIEMENS, controller model: S7-300, Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details. Gjdozt Sa Hopfx An Ijug - Machine Type: Double Caterpillar Saw Combination- Operating Voltage: 400 V- Connection Power: 22 kW- Nominal Current: 55 A- Frequency: 50 Hz- Operating Hours: 3484 h- PLC / Control Unit: Siemens S7-300 / Dual Siemens SIMATIC HMI Touch panels- Height Adjustment: Electrical height adjustment of the entire system- Caterpillars & Saws Adjustment: Both caterpillars and saws individually adjustableCaterpillar (Haul-off) Specs:- Total Pull-Off Force: 10 kN- Pull-Off Speed: 0.1 to 10 m/min- Belt Contact Length: 1000 mm- Upper Edge Lower Cleat Min. / Adjustment Travel: 1000/150 mm- Belt Width: 100 mm- Maximum Temperature: 120°C- Upper Part Stroke: 200 mm- Center Distance: 220 mmSaw Specs:- Regulated Saw Blade Nominal Speed: 500 - 4200 rpm- Motor Power: 3 kW- Motor Voltage: 230/400 V- Max. Saw Blade Diameter: 400 mm- Max. Material Speed: 10 m/min- Saw Repeat Accuracy: +/-0.5 mm/m- Longitudinal Stroke (Extruder Direction): 900 mm- Average Working Height: 1100 mm- Adjustment Option: +/-50 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 – UNIVERSAL MIXER GRANULATOR / PHARMACEUTICAL GRANULATOR For sale: DIOSNA V50 Universal Mixer Granulator in exceptionally good used condition. The machine is manufactured with high-quality stainless-steel components and is equipped with a bottom-mounted three-blade mixing tool and a high-speed side chopper. The product-contact area, and especially the interior of the processing vessel, is in outstanding condition. The vessel, mixing tools, and stainless-steel surfaces are exceptionally clean and show very little sign of wear. TECHNICAL DATA Manufacturer: DIOSNA Dierks & Söhne GmbH, Germany Guedpfx Aezxq U Hen Ieg Model: V50 Machine No.: 383-001 Year of manufacture: 2007 Usable bowl capacity: 46 liters Electrical supply: 400 V / 50 Hz Rated power: 6.5 kW Rated current: 15 A CE marked Ex / ATEX marking according to machine nameplate MIXING / GRANULATION SYSTEM The DIOSNA V50 combines intensive mixing and granulation in one compact processing machine. The processing vessel is equipped with: - Three-blade bottom mixing / granulating tool - High-speed side chopper - Stainless-steel processing vessel - Large side discharge system - Hinged stainless-steel vessel lid - Inspection window in vessel lid The combination of the bottom mixing tool and side chopper provides intensive product circulation and is suitable for mixing, granulating, agglomerating, and breaking down oversized product particles. CONTROL & EQUIPMENT - Siemens SIMATIC Touch Panel - Integrated stainless-steel control cabinet - Emergency stop - Key-operated control switch - Additional process control/display unit - Clean-air connections/control - Nitrogen connections/control - Mobile design on castors - Stainless-steel construction - Additional filter elements / accessories as shown in the photographs APPLICATIONS Suitable for applications including: - Mixing and homogenization of powders - Wet granulation - Agglomeration - Preparation of pharmaceutical granules - Breaking down oversized agglomerates - Pharmaceutical and chemical processing - Pilot and small production batches CONDITION Exceptionally good used condition. The interior of the processing vessel is remarkably clean and appears to have seen very little use. The mixing tool, chopper, and product-contact surfaces are also in excellent condition. The photographs show the actual machine offered for sale. INSPECTION Inspection and demonstration by appointment at our premises in: 4226 Breitenbach Switzerland Worldwide delivery can be arranged. Further technical information and additional photographs are available on request. CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Gujdpex Ehg Tjfx An Iog

Condition: used, PLC control, supply unit, converter, power module, U/E module Guodpfxsfivi Uj An Ijg -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic DP Interface Module IM151-1 ET200S -Terminal modules: Type 6ES7 151-1CA00-3BL0 6ES7 193-4DLOO-OAAO -Number: 2 modules available -Price: per piece -Dimensions: 170/120/H75 mm -Weight: 0.7 kg/pc. Gusdjh Szakspfx An Ieg

Condition: good (used), PLC control, digital output, digital output, relay output, relay output -Manufacturer: Siemens, Simatic S5 digital output -Type: 6ES5 441-8MA11 -Quantity: 11x pieces available -Dimensions: 100/45/H135mm Gsdpfx Aoh Di Hnjn Ioug -Weight: 0.2 kg/pc

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module -Manufacturer: Siemens Simatic S7 Analog Module -Type: 6ES7 334-OKEOO-OABO -Quantity: 1 module available Gedpsh Dnhajfx An Isug Price: per piece -Dimensions: 115/40/H125 mm -Weight: 0.3 kg/pc.

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, interface module Guedpfxsh Dnh Ej An Isg -Manufacturer: Siemens Simatic S7 Profibus-DP ET 200S interface module -Type: 6ES7 151-1AA02-OABO -Number: 2x module available -Price per piece -Dimensions: 75/45/H120 mm -Weight: 0.1 kg/pc.

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, reserve module -Manufacturer: Siemens, Simatic S7 electronic module ET 200S -Type: 6ES7 135-4GBO1-OABO -Number: 1x module available -Price per piece -Dimensions: 55/15/H80 mm -Weight: 0.1 kg/pc Guedoh D Almjpfx An Ieg

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital output -Manufacturer: Siemens, Simatic S7 electronic module ET 200S -Type: 6ES7 134-4GD00-OABO Gedpoh D Iltsfx An Ioug -Quantity: 1 module available -Dimensions: 55/15/H88 mm -Weight: 0.1 kg

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Gjdpfxstiwgie An Isug Ground level installation

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational Gujdpfx Ajk Nn Dzen Iog The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Condition: good (used), Assembly station, assembly device, vacuum assembly device -Manufacturer: reis, mounting station with suction cup holder -Control: Siemens simatic -Suction cups: 6x Ø 165 mm -Platform: stroke 300 mm -Previous use: Production of solar panels -Individual components: see photos -Number: 2x mounting device available -Price per piece -Dimensions: 2620/1860/H1210 mm Gjdpfx Anstrzpls Isug -Weight: 2000 kg/pc.

Condition: used, Year of construction: 2001, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, Guodpstqqlqofx An Ijg 22 machining units (drilling 7 units, drilling and thread cutting 8 units; drilling and sinking 5 units; drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device