Used Sinmag Sm-200S for sale (13,154)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: Fodpfey Hkfdox Alwopg - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: Fodpfsy Hkd Hex Alwepg - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) Fpedpfx Ajy Edn Njlwog tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, functionality: fully functional, •20 litre bowl •Stepless speed control (forward/reverse) •Timer •Power approx. 1 kW, 400 V •Speed: 90–800 rpm •Weight: 180 kg •Dimensions: W = 640, D = 615, H = 1380 mm Manufacturer specifications: dough min. 0.5 litres, max. 4 litres Mass min. 1 kg, max. 16 kg Cream min. 1 kg, max. 10 kg Accessories: 1 x 20-litre bowl, 1 x 25-litre bowl, 1 whisking bowl (36), 1 whisk Fpsdpfsy Rkf Sex Alwjg Technically inspected, cleaned All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible, shipping costs borne by buyer) Advance payment required with order Sales are made exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical modifications and errors.

Condition: used, Year of construction: 2018, operating hours: 7,610 h, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, Colour: Grey Weight: 2.500 kg Price: On request - Details: - └ Description: Machine currently still has a malfunction to be fixed - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 7610 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit Fpjdpfxsy Ewv To Alweg - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Fodpfxov Sbmqs Alwepg Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm Fjdewp Eblspfx Alwopg sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Fjdpfjyvgf Dex Alwjpg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 Fpsdpfoycckcjx Alwjg workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, This listing is for the Thermo Scientific Adv 4 Block Drybath 200-24V The unit is in full working condition and ready for immediate use Designed for consistent and accurate heating of samples, this dry bath accommodates multiple blocks, offering flexibility for various tube sizes. Ideal for molecular biology, clinical, and research labs requiring stable temperature performance. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Fodpfxjy Dpyze Alwspg • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Model: LCS XL-1600 Fpodpfoyvk R Eox Alweg Year of manufacture: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous application: Cutting acrylic glass The laser source was replaced 5 years ago ä12526

Condition: like new (used), Year of construction: 2018, operating hours: 4,918 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 * ID: 24090.5905 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2018 Operating hours: 4918 hours Battery: Completely NEW * 24v / 344ah * Year 2025 Fpedpfx Asy Itkxjlwsg Options: * EX * Atex - Pyroban !!!! Gas group = IIIB Type = 3D (approved for ZONE 22) Temperature class = T4 (135°C)

Condition: like new (used), Year of construction: 2012, operating hours: 1,124 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: BT LPE 200 * EX * 3G / Zone 2 Pyroban ID:25020.6540 Cat.:Demo Forks:1150 x 570 mm Capacity:2000kg Fpedpfx Aey Itc Islwsg Year:2012 Hours:1124 hours Capacity:24 v / 300 ah - Bj 06 / 2020 Options:* EX * Atex - Pyroban !!!! System = S6000 E Gas group = IIB Type = 3G (allowed in ZONE 2) Temp class = T3

Condition: like new (used), Year of construction: 2017, operating hours: 1,242 h, load capacity: 2,000 kg, lifting height: 2,150 mm, fuel type: electric, mast type: duplex, construction height: 1,750 mm, Manufacturer + model: BT SWE 200 * EX * Pyroban 2G / Zone 1 Mast: 2W2150 ID: 24110.7680 Fjdpfsy Itbksx Alwepg Category: Demo Mast: 2W2150 Lowered height: 1750 mm Lifting height: 2150 mm Capacity: 2000 kg Year: 2017 Hours: 1242 hours Battery: NEW * 24V / 255Ah * Year 11/2024 Options: * EX * Atex - Pyroban !!!! System = Ex-Tec 2G Gas group = IIB Type = 2G (approved for ZONE 1 & 2) Temp class = T3 FEM 2 fork carriage – adjustable forks

Condition: used, twin shaft paddle mixer Fpsdpfx Asy Am Dnjlwsg mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: used, 2 Color Offset Press Heidelberg SM 52-2P+ Plus version with Perfecting Fpedpfx Aey Ndinslweg 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg SM 52-2P+ Baujahr / Year 1997 - Serial-No. 201301 Druckzahl / Impressions 54 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm  Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Perfecting 1/1 - 2/0 CP-Tronic, Autoplate, Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, new ! Fodpfoyzykxox Alwspg all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Fpsdpfx Asy Au Nfslweg -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Fjdoy Au Eyjpfx Alwspg -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 Fedpfxjy Nugqe Alwepg - One print bed with a format of 2500 x 1300 mm or 2500 x 3100 mm (model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/h (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: The 1-liter ink bottles can be easily replaced from the front — refilling is much faster! - Simple operation — no alignment issues: Equipped with alignment pins and a printed measuring scale for precise media positioning on the print table. The register pins secure the media against shifting. The measuring scale makes it easy to adjust layout and RIP data to the exact position. - Increased flexibility with direct print on thick media: Prints on boards up to 50 mm in thickness - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents settling of white ink - Mimaki Clear Control (MCC): For glossy surfaces — to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces ink drying time and UV light exposure. This enables both glossy and stylish matte finishes. In addition, multiple layers of clear varnish can be applied for embossed, multidimensional effects. - Convenient ink options: - LH-100 rigid UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% stretchability, making them suitable for a wide variety of substrates - White ink for image backing reduces light transmission - Two-layer printing with white on clear and colored substrates - Print finishing with gloss or matte varnish options - Environmentally conscious printing: No harmful emissions due to UV print technology. Lower power consumption and longer lifespan thanks to UV-LED lamps - RasterLink 6: - Powerful RIP supports outstanding color reproduction - Various print jobs can be easily nested - Simple and user-friendly interface - Intuitive icons help with quick orientation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeated use - The print process is monitored directly in the main window - Software can be updated at any time via the internet, and profiles can be downloaded or updated. Printing method: Piezo inkjet Print heads: 2 heads in staggered arrangement Max. print format (W x L): 2500 × 1300 mm Max. media size (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Number of vacuum zones: 2 sections (on the X-axis) Accuracy (absolute): ± 0.3 mm or ± 0.3% of the specified distance (the larger value applies) Repeatability: ±0

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature management. It is equipped with a mold-proximal valve switching unit (piston accumulator) to supply the piston inserts with water at temperatures of up to 200°C. NEW PRICE of the system: €67,000 plus the water hoses. The system will be inspected by Technotrans (GWK) prior to sale. More technical details about the “vario” temperature control unit available on request... The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature control of mold inserts) - 1 mold-proximal valve switching unit Fpjdpfx Asyxgnfolweg - 1 piston accumulator - 1 electronic control and regulation unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package, optional for an extra charge ...and more, see pictures.

Condition: used, Year of construction: 2003, X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feed: 30 000 mm/min Feed rate: 8 000 mm/min Speed range: 40 - 12 000 rpm Table : 2 000 x 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm Fpsdjy Nlv Nepfx Alwjg T-slot distance: 100 mm Max. table load: 1 000 kg Spindle distance to table: 180 - 690 mm Spindle center to stand: 530 mm Table height: 750 mm X-axis: 1 660 mm Y-axis: 510 mm Z-axis: 510 mm Control system: Mazatrol 640M Fast feeding: 30 000 mm/min Feeding: 8 000 mm/min Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. board load: 1 000 kg Distance from spindle to table: 180 - 690 mm Spindle distance to table: 180 - 690 mm Fast feed: 30 000 mm/min Spindle center to stand: 530 mm Feed rate: 8 000 mm/min T-slot distance: 100 mm Max. table load: 1 000 kg Table height: 750 mm

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm Fpodpfjy E Abnjx Alwjg * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: used, roll diameter 420 mm throat 420 mm workpiece height 300 mm table-size 610 x 610 mm saw band length 3150 - 3260 mm turning speeds 12 - 750 m/min weight of the machine ca. 0,4 t dimensions of the machine ca. 1,2 x 0,8 x 2,0 m Band saw with Fpedpey Ezzgofx Alwog - Ideal welding machine - Grinding machine

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Fsdpfx Alsy N Dkfswopg