2013 Vollmer CMF 200
Vollmer CMF 200

Name: Vollmer CMF 200
Brand: Vollmer
Availability: InStock

Year of construction

2013

Condition

Used

Location

Cloppenburg Germany

Show map

Machine data

Machine type:: 2013 Vollmer CMF 200

Manufacturer:: Vollmer

Model:: CMF 200

Year of construction:: 2013

Condition:: used

Price & Location

Location:: Cloppenburg, Germany

Call

Details about the offer

Listing ID:: A18777421

Reference number:: M01943

Update:: 21.03.2025

Description

Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring.
Circular saw blade diameter: 200 - 840mm
Circular Saw Bore Diameter: from 16 mm
Tooth pitch: 6 - 180mm
grinding path: up to 25 mm
Bwjdpfjv Sbmqox Aaask
tangential relief angle: 0 to 10 degrees
max. grinding wheel diameter: 125 mm
Grinding wheel bore diameter: 32 mm
Grinding spindle variable: 1600 - 5500 rpm,
Connected load approx.: 8kVA (400V / 50Hz)
Dimensions W x D x H =: 2770x1900x2045mm
mass: approx. 4700 kg
colour: Gray

Seller

Last online: A week ago

Registered since: 2009

43 listings online

Call

Send inquiry

Telephone & Fax

+49 4471 ... show

Fax:

These listings may also fit your interest.

Listing

Grevesmühlen

954 km

Frame sharpening machine
RivoGA250

Call

Listing

Eccentric Press - Single Column SCHULER PDr C63-315

Plettenberg

883 km

Eccentric Press - Single Column
SCHULERPDr C63-315

Call

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm Bjdpfxelp U D Tj Aaaowk table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

See details

Listing

Cold Circular Sawing - Automatic MEP TIGER 352 NC 5.0

Remseck am Neckar

1,127 km

Cold Circular Sawing - Automatic
MEPTIGER 352 NC 5.0

Call

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm Bjdpfx Aajfg Rlcoaowk 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

See details

Listing

Reiden

1,200 km

Radial drilling machine
OerlikonUB2

Call

Listing

MACHINING CENTRE CASADEI MC 5016 ALU RAN Casadei Samec ALURANGER 5016

Zamość

1,845 km

MACHINING CENTRE CASADEI MC 5016 ALU RAN
Casadei SamecALURANGER 5016

Call

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Bwjdpfx Aaemzbr Seaek Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

See details

Listing

Eccentric Press - Single Column WEINGARTEN N 63

Eislingen/Fils

1,164 km

Eccentric Press - Single Column
WEINGARTENN 63

Call

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Bwodsfx Hv Hopfx Aaask hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

See details

Listing

Crane chassis hoist 4000 kg Stahl GO 24 20 16 AS 2010

Wiefelstede

785 km

Crane chassis hoist 4000 kg
StahlGO 24 20 16 AS 2010

Call

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm Bodpfxjl Tuvdo Aaaswk -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

See details

Listing

Lifting table HS 300 large Reinhold Beck Maschinenbau GmbH HS 350 Groß

Krauchenwies

1,196 km

Lifting table HS 300 large
Reinhold Beck Maschinenbau GmbHHS 350 Groß

€1,998

ONO plus VAT

Call

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, LEVEL - Lift Table HS 350 Large without worktop Description: ᐳ Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for accommodating various worktops; 4 swivel castors, 2 with brake; Wheel diameter 125 mm; operated by foot pump Load capacity in kg: 350 Bwedpfx Aaeh A Hxijajk Weight in kg: 150 Useable lift in mm: 610 Construction height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

See details

Listing

Balaguer

1,546 km

Hydraulic guillotine shear
HACOTS 306

Call

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Bwodpexgdlnjfx Aaaok Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

See details

Listing

Miechucino

1,374 km

Sawn wood chipper
LINDNERT 400/140-2

€13,878

Fixed price plus VAT

Call

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection Bsdpfxer Ak Rgj Aaaewk – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

See details

Advertise here

2013 Vollmer CMF 200Vollmer CMF 200

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

2013 Vollmer CMF 200
Vollmer CMF 200