Used Stripper/Casing Separator for sale (8,412)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm Dedpjw Sgnkjfx Aggokt - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Year of construction: 2021, condition: used, machine/vehicle number: TSC.153.028, Wolf bucket separator Terra-Star Compactline TSC.153 continuously impresses customers with its high throughput. The TSC.153 requires only 20 to 30 seconds to process a capacity of 0.95 m³. With 50 fills, this results in well over 45 m³ per hour. The ability to quickly and easily convert the shafts makes the Terra-Star Compactline series unique on the market. The separator is equipped with screening shafts, star discs with a separation gap of 30mm – producing a grain size of 0-35/40 mm. In wear zones, the tools are reinforced with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Dksdpfx Aow Skvrsggst Throughput: 34 - 50 m³/h Leak oil connection required: no

Year of construction: 2023, operating hours: 514 h, condition: used, functionality: fully functional, overall weight: 7,900 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0602, SORT FLUID is a dry sink-float sorting system with an integrated dosing bunker. This replaces conventional wet sink-float sorting and eliminates the need for liquids entirely. Through an innovative combination of airflow, a special bed material, and gravity, the metals are sorted according to their average particle density. This enables separation of light and heavy metals with a high purity of up to > 99%. This module is part of our rental fleet. Djdextb A Depfx Aggskt

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Dksdpfxeymmqze Aggjt Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Dodowxlm Hopfx Aggekt Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, - Vacuum filler Handtmann type VF 616 - Output approx. 3,600 kg/h – Filling pressure approx. 45 bar – Power: 6 kW / 3 x 400 V / 50 Hz - PCK-3 control monitor - Filling hopper 350 l – split – 90/350 l - Weight compensation - Vacuum pump Busch 16 m³. - Lift for 200 l standard trolley type 83-6, stainless steel Dedpfx Asykz T Eoggekt - Twisting gearbox type AG 410 / stainless steel - Holding device type HV 414 including 2 x filling tubes + brake / stainless steel - Deflection device with deflection rollers / stainless steel - Casing loading device DA 78-6 – stainless steel - Year 2015 / Completely reconditioned in 2026 !!! with original spare parts - Made by Handtmann !!! - Complete accessories + documentation - Metal separator Liquiscan-VF – included for free

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Dkedpoya Uuzjfx Agget Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. Djdpfx Ajyfwbzoggekt On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210

Year of construction: 2023, condition: used, Wolf bucket separator TSP.124 is designed for tough continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free, and the chain casings contain fluid grease, which is distributed to all areas by the movement of the bucket and the running chain, ensuring constant lubrication. Therefore, the Terra-Star never needs to be relubricated and is maintenance-free. The machine is equipped with M80X mixing shafts, and the tools are hardfaced with armored wire in the wear zones. An OQ70/55 adapter is installed, although other adapters can also be mounted. Combined use with excavators and wheel loaders is possible without difficulty. The adapter is not included in the price. For excavators from 18 t For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³ / h Dsdpfxoyf Aqno Aggekt Leak oil connection required: 1 Series: TSP.124.096

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134 used, year 2025 Maintenance-free, screening line 0-20/25 mm, star discs TA 15mm Star discs armored Application with screening shafts: Dodpfx Asyf Arxsggskt Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also works with moist soil. Mixing in compost, sand, substrate, etc. in one operation during screening is easily possible. Screening of topsoil, construction debris, gravel. Refilling of construction pits and cable trenches, etc. Shafts for other grain sizes or tasks can also be installed—ask us for details. Fitted with OQ65 Price is without adapter plate For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Required leakage oil connection: 2 Series: TSC.134.012

Year of construction: 2025, condition: used, List price €34,000 Breaking up, crushing, mixing particle size 0-60/80 mm For soil conditioning, mixing in lime, stabilizing agents, sand, compost, and other soils. Crushing and breaking up soil clods, separating stones, branches, roots, etc. Particle size 0-60/80 mm Aerating, crushing, shredding, turning biomass, organic waste, and compost For lime application, we also offer a binder spreader in our range, available with weighing system. The separator comes from a short-term rental and shows minimal signs of use. Price without adapter. The surcharge for the lightly used OQ70/55 is €4,250 For excavators from 16 t For wheel loaders from 8.5 t Dkedpfx Ajyf Ar Soggst Throughput: up to approx. 65 m³/h Drain oil connection required: 1 Series: TSC.154.326

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, the machine delivers an enormous throughput with its 4 shafts! Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc., while simultaneously crushing soil clumps. Aerating, shredding, tearing, turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc. that cannot be crushed. Crushing easily breakable stones in construction debris such as pumice, bricks, Poroton blocks, while simultaneously separating the chunks. Larger and harder parts remain in the separator. Feeding lumpy soil to a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Dkedoyf Au Hjpfx Aggst Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.128

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132 Dkodpsyf Avdofx Aggst

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. Dkjdpfxsyf A Ere Aggjt With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. Dedpow Rkxqsfx Aggekt For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Leak oil connection required: no

Year of construction: 2024, condition: used, machine/vehicle number: TSC.153.042, Wolf Bucket Separator Terra-Star Compactline TSC.153 continually astonishes customers with its high throughput. The TSC.153 requires only 20 to 30 seconds for a capacity of 0.95 m³. With 50 fillings, this results in well over 45 m³ per hour. The ability to quickly and easily change the shafts makes the Terra-Star Compactline series unique in the market. The separator is equipped with screening shafts and star discs with a separation gap of 15mm – producing a grain size of 0-20/25 mm. Tools in the wear zones are armoured with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Drain line connection required: 2 Dkedew Rqz Espfx Aggst

Condition: new, Year of construction: 2024, overall weight: 265 kg, empty load weight: 265 kg, operation weight: 265 kg, _____Basic equipment > Hydraulically driven single-chamber spreader with feed auger and spreading disc. > Spreader hopper and distributor made of stainless steel. > Dimensions (W x H x L): 1050 x 950 x 1800 mm. > Unladen weight approx. 265 kg. > Incl. tarpaulin cover. > Incl. manual operation. > Incl. rear extension. (Length determined by axle load calculation) Mounted spreader, A1201 B1050 H950 L1800 Carrier vehicle: Multihog MXC Batch/Serial number: 40941 Special equipment - Discharge welded - K-basis 2 control system, fixed wiring harness, microprocessor control in CAN-BUS technology. Regulation of all drives in a closed control loop (with feedback). Functions: - Adjust spreading width - Adjust spreading density - Beacon on/off - Work light on/off - Spreader operation/pause - Illuminated buttons and rotary controls - Data logging - Speed simulation - x2 button - Complete wiring incl. wiring harness separation - Terminal box for mounting outside the cabin Rear apron W 1500 x H 500 Yellow beacon Agitator shaft set - Improves functionality regarding bridging with damp, poor quality spreading material. Auger reversing - Allows reversing of auger direction at the press of a button on the unit in case the feed auger is blocked or jammed. Location: 54595 Prüm Djdpew Ibbqofx Aggskt

Condition: excellent (used), DEMAG hub motor 36/20 K6P for electric hoist P1600 available with clutch and brake disc on request Dksdpfx Agjv Uai Ajgst Type 36/20 K6P, motor in good, tested condition Motor/armature/rotor/runner, bearing shields, clutch, brake also available separately P2000 casing, cable drum, cable guide from large stock

Condition: reconditioned (used), Year of construction: 2006, Casemaker - device for processing center strip rolls - processing hot-glue - viscosity control device - board center strip magazine - board cutting device PS - device for producing quarter-bound cases in 2 passes - device for processing of asymmetric cases Dkedpfxov Uh Nko Aggst

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Dksdsyupynepfx Aggst

Condition: used, mileage: 109,384 km, power: 70 kW (95.17 HP), first registration: 06/2022, fuel type: diesel, empty load weight: 1,596 kg, overall weight: 2,021 kg, axle configuration: 4x2, wheelbase: 2,713 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, F2U Parking Package, SA8 Seat Comfort Package, Q10 Cross Member for Trailer Hitch, FR8 Reversing Camera, H10 Heated Seats for Driver and Passenger, W50 Rear Doors Double-Wing 180 Degrees Without Windows, E07 Hill Start Assist, MA2 Speed Limit Assistant, KA1 Particulate Filter, MJ8 ECO Start-Stop Function, H06 Air Conditioning, C6L Multifunction Steering Wheel, JK5 Instrument Cluster with Color Display, MS1 Cruise Control, JA5 Light and Rain Sensor, F68 Exterior Mirrors Heated and Electrically Adjustable, B26 Parking Brake, T16 Sliding Door Right, L16 Halogen Fog Lights, IM1 Wheelbase 2716 mm, J56 Seat Belt Warning for Driver and Passenger Seats, E1D Digital Radio (DAB), BB3 Electronic Stability Program (ESP), SA4 Airbags for Driver and Passenger, FQ3 Glove Compartment on Passenger Side, Lockable, BB0 Braking System with ABS and ASR, D50 Full Partition, IL5 Left-Hand Drive, IA0 Drivetrain Formula 4x2, SD1 i-Size Child Seat Attachment, H20 Heat-Insulating Glass All-Around, BA3 Active Brake Assist, JB4 Active Lane Keeping Assist, JW8 Attention Assist, EY5 Mercedes-Benz Emergency Call System, JP7 Blind Spot Assist, I44 16" Steel Wheels, R2F 40.6 cm (16") Alloy Wheels in 5-Twin-Spoke Design, GK6 6-Speed Manual Transmission, T78 Sliding Door Track Cover in Body Color, P2F Active Safety Package, V3L All-Weather Floor Mats, FG1 Armrest with Storage Compartment, P4A Equipment Level A, IC3 Model Series 420 VS11, SL2 Height-Adjustable Passenger Seat, IK7 Exterior Mirror Indicators in Halogen Technology, I5D Diesel, EW6 Digital Extra: Remote Services Plus, E4S Digital Extra: Smartphone Integration, MO6 Emission Standard Euro 6d-TEMP M/N1 GR. II, SF6 Height-Adjustable Driver Seat with Lumbar Support, FE3 Power Front Windows with Comfort Function, FC5 Heat-Insulating Front Windshield, X0I Weight Variant 2,021 kg, I40 Black Grained Grab Handle, V43 Wooden Floor, I28 LED Front Interior Lighting, LL1 Interior LED Lighting, VA2 Cargo Area Interior Trim up to Roof Height (Wood), J1F Dashboard in Black Grained Plastic, J1B Dashboard Black Plastic, XD0 Internal Code ALL6, CU9 Internal Code SSPREM, IF6 Panel Van, HI2 Climate Zone 2 (Temperate), JH3 Communication Module (LTE) for Digital Services, IK0 Complete Vehicle, KL5 Fuel Filter with Water Separator, CK1 Paint Control 1 Dkedpfx Asy Sr Tmsggot Note In spite of our careful control of all price markings, there may still be errors that occur. In some cases, these may result from transmission errors in the systems of various platform providers. We also cannot rule out the possibility of mistakes on our part. Therefore, please be aware that all information is without guarantee and does not constitute a legal claim. Furthermore, a price indication cannot be considered a part of the contract. If you place special value on a specific equipment feature in our listing, please bring this to our attention at the time of contract conclusion. Thank you for your understanding!

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. Dkedezfy R Depfx Aggot A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. This module is part of our rental fleet.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Djdpjzc H H Iofx Aggekt Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. Dkodpfx Aeyvrzxoggjt For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Condition: used, Year of construction: 2025, Technical details: content: 1000 cbm capacity in bar: 11 total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg • Function: Serves as a buffer and storage medium in compressed air stations, separates condensate, and reduces the frequency of compressor cycling. Djdpfxsy I Rr Ts Aggokt • Quality standards: Manufactured in accordance with the European Pressure Equipment Directive (2014/68/EU) or 2014/29/EU (simple pressure vessels) as well as the AD 2000 guidelines. • Surface protection: Typically hot-dip galvanized inside and out in accordance with DIN EN ISO 1461 for maximum corrosion protection and durability. • Operating data: Designed for temperatures typically ranging from -10 °C to +50 °C (in some cases up to +80 °C) and a standard operating pressure of 11 bar with a test pressure of 16 bar. • Design: Vertical design with welded longitudinal and circumferential seams. *