Used Thread Winder for sale (2,715)

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Itsdez E Imqopfx Acpen Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. Isdpfjz E In Iex Acpjtn With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement ! Iedpfxez E Iwio Acpotn

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON04, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Ijdpfxjz Ipire Acpotn Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Iodpfx Aez Iprtjcpjtn Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable Iodpfxoz Iq Tre Acpstn - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS Itodpfx Aez Irx Nocpen – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: Iodpfx Acsz Ir Haopotn - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,325 mm, total length: 3,100 mm, total width: 2,800 mm, overall weight: 5,000 kg, Equipment: cooling unit, GF AgieCharmilles CUT 30P – Wire EDM machine, manufactured in 2011 Isdpfjz I Ritox Acpjtn Wire EDM machine for tool and die making Technical data & features: - Travel ranges X/Y/Z: 600 × 400 × 350 mm - U/V axes: ± 50 mm - Max. workpiece size: 1,050 × 800 × 350 mm - Max. workpiece weight: 1,000 kg - Tapered machining: up to ± 25° at 80 mm height - Wire diameter: 0.15–0.30 mm, wire spool: 25 kg - Automatic wire feeding and re-threading - Glass scales, automatic wire tensioning and collision protection - Surface quality: up to Ra < 0.25 µm - Windows-based control system with 15″ LCD, DXF import and 3D graphics check - Connection power: 9 kVA The machine has already been cleaned, overhauled and tested. You are welcome to inspect the machine on site and test it under power. We can also offer transport, commissioning and training as additional services. Contact us for a customized offer.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, GF AgieCharmilles CUT 2000X Itsdpsz I Nbbsfx Acpjn Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm, including option KIT 50 Includes automatic wire changer AWC Wire EDM machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes glass scales for X and Y axes VISION 5 control 15" LCD color screen, jog shuttle and mouse Includes Conic-Plus option for improved taper Includes Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We would be happy to perform an individual test cut. We also offer on-site commissioning and training for this machine.

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Itodpfx Asz Ha Hlecpjn

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Numerical display for working height Planer table made of gray cast iron The planer table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller clamping pressure adjustable Front infeed roller with helical gears Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter block Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position is maintained perfectly even without locking Helically geared steel infeed rollers for consistent and even wood feed Second, rubberized feed roller at the outfeed Solid anti-recoil guards prevent workpiece recoil A 4-cutter block ensures an optimal planing result Dimensions and weights Ijded Hx E Iepfx Acpjtn Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust extraction connection Dust extraction nozzle diameter (planer table) 150 mm Drive power Main motor 7.5 kW Installation information Space requirement (length) 1170 mm Space requirement (width/depth) 1003 mm Space requirement (height) 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 520 mm Planer table width 1000 mm Working height min. 3.5 mm Working height max. 250 mm Working length min. 210 mm Maximum chip removal 8 mm Electrical data Connection voltage 400 V Planing cutter block Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Itjdpsff Efasfx Acpen Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size Itedpovutw Hjfx Acpen 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Itsdew Sgnkopfx Acpjn - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Superstructure: Compressor with oil cooling. The compressor is operated via tipping hydraulics! Oil motor Sunfab type M-034, No. 278048, silo compressor GHH type CG80 H with diesel bell, machine No. 383266 WO2225NJ630F4DG, silo oil 405 spec. compressor oil K-10 ltr., pressure silencer W1-12 s2.0 inch Storz C2.0 inch internal thread, intake air filter W12/13 M lid R F-Part. AL17 safety valve R 1 1/2 inch 2.6 bar, measured compressor speed on Szm motor 1050 rpm, split drive large = compressor 3450 rpm. Dismantling of a Feldbinder silo. The compressor was overhauled in 2006 for approximately €9,000; invoice is available. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Ijdji Rnx Uspfx Acpjtn

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: K2266, MAMMUT VMK 3 250 CNC 601 multi-needle industrial sewing machine, double-chain stitch, manufactured by Nähmaschinenfabrik Emil Stutznäcker (Cologne, Germany). A benchmark machine in the bedding industry for the continuous quilting of mattress casings, duvets, bedspreads, and panels. Features: - Manufacturer: MAMMUT (Emil Stutznäcker GmbH & Co. KG) Isdpjz N A Ryjfx Acpetn - Type: VMK 3 250 CNC 601 - Year of manufacture: 1997 - Serial number: K2266 - Stitch type: double-chain stitch - 3 rows of needles, 75 mm spacing between rows - Minimum needle spacing: 25 mm - Working width: approximately 2,500 mm - CNC 601 numerical control - Integrated thread stand (cone holders) - Unwinders and fabric roller - Electrical cabinet with control and emergency stop - CE marking Location: Mouscron, Belgium Sale EXW, loading possible upon request.

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Some of the technical specifications on the nameplate are damaged and not completely clearly legible. Equipment: Isdpfx Aez Iqh Aecpjtn RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Repair of existing vibration testing systems Supply of replacement and assembly components Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No warranty for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed.   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Itodez Iqigjpfx Acpsn Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, AGIE CHARMILLES CUT 20 CNC wire erosion machine Manufacturer: GF AgieCharmilles Model: CUT 20 Year of manufacture: 2008 Ijdpfx Aez Rz D Iocpotn Control: AgieCharmilles CNC control Machine type: CNC wire erosion machine Travel ranges: X-axis: 350 mm Y-axis: 250 mm Z-axis: 250 mm U/V axes: ±45 mm Working area: Max. workpiece dimensions: 900 × 680 × 250 mm Max. workpiece weight: 400 kg Max. taper angle: ±25° at a workpiece height of 80 mm Wire erosion system: Wire diameter: 0.15–0.30 mm Automatic wire threading Machining in a water bath Dielectric fluid: Deionized water Wire speed: approx. 30–330 mm/s Machine data: Connection voltage: 380 V / 50 Hz Machine weight: approx. 3,000 kg Machine dimensions: approx. 3,000 × 2,100 × 2,300 mm (L × W × H) Equipment: - CNC control AgieCharmilles - Automatic wire threading - U/V axes for taper machining - Dielectric fluid and filter system - Wire collection container - Handheld control unit According to the previous owner, the electronics have been extensively refurbished, with work carried out by Charmilles technicians.

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Itjdpfx Ask Dpxljcpen Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Special accessories for DECKEL SO + SOE tool grinding machines: - 1 milling cutter special holder in very good condition o for grinding shank milling cutters with a diameter of 16 – 25 mm and with a Morse taper socket MK 1, MK 2 + MK 3 o Milling cutters with a shank diameter of 25 mm can be directly inserted o Through-hole max. 25 mm Itjdjctyh Ujpfx Acpsn Price: €950.00 net - New collets for milling cutter special holder: - 1 set of collets for milling cutter special holder, inner diameter Ø 16, 18 and 20 mm, price: €129.00/piece net - 1 set of collets for milling cutter special holder, inner square □ 8, 10 + 12 mm, price: €145.00/piece net - 1 set of Morse taper sockets MK 1, MK 2 + MK 3, price: €245.00/piece - New cup grinding wheel Ø 80 mm, price: €40.00/piece net - 1 brand new knurled nut for clamping collets with a saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All of the above prices are net prices plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Iedpfxjwwmkde Acpjtn Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. Itsdpfx Aezdtflecpsn In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Itsdjvr Eh Espfx Acpon Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel