Used Uez Zm 200 E for sale (78,644)

Condition: excellent (used), Year of construction: 2019, Panel dividing saw HOMAG SAWTEQ B-200 / HPP 200/38/32, manufactured in 2019. Cutting length 3,800 mm; saw blade overhang 65 mm; scoring saw; intelliGuide Basic; three air cushion tables; label printer. Collection possible from December 15th. Earlier collection is only possible by arrangement. Inspection by appointment. Dismantling, loading, and transport will be arranged. Pgedpfx Abo Adubfjusu Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Pgodewc Rk Eopfx Abuou Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), Year of construction: 1999, Year: 1999 Podpsz Hk Hvjfx Abuogu - technically efficient, ready to work – after full service - for the upper and lower hinge - centering the element - SPS control

Condition: used, Year of construction: 1997, _Engel ES 1050/200 HL_ Clamping force: 200 t Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Pgedpfsztadgex Abueu Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Condition: used, functionality: fully functional, Year of construction: 1975, machine/vehicle number: CR2360 / 075, Abus / Steel - Year of manufacture approx. 1975 - Abus chain hoist, year of manufacture 2008 Pgjdpfx Abszv H H Hjusu 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane system Load capacity 2000 kg Width approx. 8.4 m, gauge approx. 7 m Crane girder INP240 Includes running gear, complete control system, floor-level operation via control panel, chain hoist Abus GM6-2000.5, 2-strand All cranes can be moved electrically in all 3 axes Lifting height/hook travel approx. 4 m Connection to 400V 16A Year of manufacture approx. 1970/2008 Good used condition Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Pgodpfx Abezd Dw Ejuou Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: good (used), Brake shoe set, wheel brake, brake kit Pjdpfozbryqsx Abuegu Manufacturer: Knott, brake drum type unfortunately without type designation -Maximum permissible weight: kg -Bolt circle: Ø 110 mm / M12 Quantity: 7 pieces -Price: per piece -Dimensions: Ø 225 x 85 mm -Weight: 6,6 kg/piece

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter: 540 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 1,065 mm, controller model: Mazatrol 640, TECHNICAL DETAILS X-axis travel: 530 mm Y-axis travel: 140 mm Z-axis travel: 1,065 mm Z2-axis travel: 1,005 mm X-axis rapid traverse: 30,000 mm/min Z-axis rapid traverse: 33,000 mm/min Y-axis rapid traverse: 15,000 mm/min Z2-axis rapid traverse: 20,000 mm/min Milling spindle speed: 15–6,000 rpm Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm Max. swing diameter: 540 mm Chuck size: 8" Max. machining diameter: 540 mm Max. machining length: 1,018 mm Max. bar diameter: 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: 61 mm Spindle speed: 35–5,000 rpm Pgjdpfx Abezyl Hgouou Motor power (30-minute rating): 22 kW (?) Max. torque: 350 Nm Counter spindle Spindle nose: JIS A2-6" Spindle bore diameter: 44 mm Spindle speed: 35–5,000 rpm Motor power (10-minute rating): 7.5 kW Max. torque: 57 Nm Turret type: Spindle turret with ATC Tool size (external turning tool): 25 mm Tool size (internal turning tool): 40 mm Max. milling tool diameter: 120 mm (?) Max. milling tool length: 250 mm Indexing time (90°): 0.5 s MACHINE DETAILS Control: Mazatrol 640 Coolant tank volume: 250 l Power consumption (continuous): 32.7 kVA Dimensions & Weight Dimensions (L x W x H): 3,485 x 2,105 x 2,416 mm Machine weight: 7,500 kg EQUIPMENT Documentation Chip conveyor

Condition: good (used), Baumann Wohlenberg BSW3-1200 Pile Turner This machine is like new, fully functional, and ready to work. The most equipped turner offered by the German manufacturer Baumann Wohlenberg. This is the currently produced model. Year of manufacture: 2017. Technical specifications: Plate format: 1440 x 850 mm Stack height: 1450 mm Load capacity: 1200 kg Device weight: 2200 kg 380V power supply Control panel, fast operation, hydraulic drive. Pedpfx Abszz Hfaouegu Equipment: Electronic turn lock Quiet operation. Documentation included. Compact design, space-saving.

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency Pgsdpfx Abezul Dboueu • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.

Condition: good (used), Year of construction: 2007, operating hours: 37 h, functionality: fully functional, load capacity: 200 kg, arm reach: 2,750 mm, controller manufacturer: ABB, controller model: 66-55293 (IRC5 Dual), teach pendant manufacturer: ABB, teach pendant model: FlexPendant, input voltage: 400 V, Equipment: documentation/manual, For sale: Complete industrial robot system, ABB IRB 6600-175, with IRC5 controller cabinet. Properly stored, wrapped, and secured on a pallet. • Manufacturer: ABB • Model: IRB 6600-175 • Year of Manufacture: 2007 • Payload: 175 kg • Controller: ABB IRC5 • Includes: Robot arm, IRC5 control cabinet, FlexPendant, and interconnecting cables. • Applications: Material handling, palletizing, machine tending, heavy assembly. Pedezqdy Hopfx Abuogu Serial No. 66-55296, IRC5 Dual Controller, 37,114 operating hours.

Condition: new, Brinkmann TA400/200+001 pump, serial number: 0411006766-60794001, unused, 100% functional, scope of delivery as shown in the photos. Pjdpfezkc T Sjx Abuogu

Condition: new, functionality: fully functional, empty load weight: 114 kg, maximum load weight: 636 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,910 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 200 NEW VEHICLE Internal dimensions: 200cm x 106cm Total weight: 750 kg Payload: 636 kg Side board height: 30cm Unbraked single-axle flatbed trailer Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pin electrical system Rear lights with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be stored on the rear panel Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards 40cm - Aluminum cover with bracket for, e.g., bicycle carrier - Flat cover with or without frame - High cover 80cm or 110cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available on request! Pictures are for illustrative purposes only and may show accessories that incur an additional charge. Plus vehicle registration document and freight to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. Pgjdpfx Ajzk Hwnobuju The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FTC-200 Tracked Cone Crusher; It is produced in the form of feeding bunker, generator, cone crusher and stock belt.FTC-200 Tracked Cone Crusher, which is moved with a remote control on a steel track, successfully completes all commands by moving on its tracks in all difficult climatic conditions and rough terrain.FTC-200 Crawler Cone Crusher, which is delicately designed and meticulously manufactured for crushing stone, is the leading crawler crusher plant in the industry with its weight of 41,000 Kg and a crushing capacity of 100-180 T/H per hour. Eliminates Infrastructure Requirement FTC-200 Tracked Cone Crusher does not require an extra infrastructure as a production method, it can be moved by remote control and adapts to all difficult terrain conditions. Belt Feeder The Belt Feeder is the system in charge of quickly sending the loaded products to the crusher for the crushing process.It has a belt feeder motor protection system that gains mobility thanks to 2 motors. Thanks to this system, malfunctions that may occur as a result of overheating are prevented.The working intensity of the Belt Feeder and the crusher is coupled with the automation system. This feature works in two steps. Step 1: If the density of the crushed product in the crusher is high, the amperage of the crusher rises and this rise is detected by the automation system, the bunker transfer stops.It prevents product accumulation in the crusher feeding chute. This feature prevents the crusher from being worn out. Step 2: If the density of the crushed product in the crusher is low, the amperage of the crusher decreases. This decrease is detected by the automation system and bunker transfer increases. The feeding hopper delivers the products to the crusher faster. This feature keeps the production capacity at the maximum level. Cone Crusher Cone crushers are the crusher of FTC-200 Tracked Crushing Plant that can easily crush hard stones.The power transferred from the engine to the gear shaft is sent to the hub with gears.Thanks to the core and concave inside the crusher, it crushes the stones and breaks them into pieces. Stock Belts Pgsdpfozibahjx Abueu With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of tapes can be increased upon the request of the user.10 mm EP 125 4-ply Band elastics, moving on 4mm st 37 Twisted Sheet, perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.Belt Elastics, which are produced resistant to wear, will never let you down and offer many years of service life. Pallet System The basic element that enables the movement of the FTC-200 Tracked Cone Crusher is the pallet system.Pallets carry the entire weight of the crusher. FABO, which does not ignore the importance of the pallet system on the crushing plant, has carried out various R&D studies and has revealed the pallet system that provides maximum durability, low maintenance cost and long-term service to its user in accordance with A1 Quality CE standards.

Condition: used, Heavy duty castors, heavy duty wheel, tires, heavy duty double swivel castors, heavy duty double fixed castors -Equipment: Ball bearing, VULKOLLAN -Wheel dimensions: 200 x 80 mm -Load capacity: approx. 2500 kg -Mounting plate: 310 x 345 mm -Overall height: 345 mm -Number: 7x wheels available Pgodpodzz Eqofx Abusu -Price: per piece -Dimensions: 410/310/H345 mm -Weight: 91 kg/each

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Pgedpfsn R A Ewjx Abueu Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: cream white total width: approx. 2.200 mm total height: approx. 1.200 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 8,14 kg Internal designation: RW-2 Podpfx Asm E I Nvobuegu

Condition: used, Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm Pgsdpfolw Az Uox Abueu -Weight: 20 kg

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO , Rexroth 1MS200E-4B-A1/S010 Motor + 1MR200E-A066 Rotor + SINS-085HW Cylinder from EMAG VSC 200 Dou,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pedpfx Aol Nqydebujgu

Condition: good (used), Oil cabinet, oil cabinet, oil pump, oil dispensing station Podjb A Igvopfx Abusgu -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: HBRes, ABUS HB overhead crane system with dimensions of approximately 10x5m (5m span). Multiple units available! – Extension of the rail tracks possible! Load capacity / lifting capacity: 500 KG – 0.5 tons Technical data of the system: Overhead crane system with ABUS HB160/200 rails. The system will be delivered complete: HB rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes 500KG ABUS/Demag chain hoist. Model depends on availability. Lifting height approx. 4m. The crane is disassembled and immediately available. Used condition, see pictures. The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection only by prior arrangement. Demag KBK1, KBK2, and KBK3 rails are in stock! Pgsdpsu I Uwxefx Abueu Other KBK systems are also available. Load capacity 125KG - 1600KG. Please request a non-binding quote for your overhead crane system with the required load capacity and dimensions.

Condition: used, maximum load weight: 13,770 kg, overall weight: 4,220 kg, axle configuration: 2 axles, first registration: 03/2004, loading space length: 7,000 mm, loading space width: 2,500 mm, * Schwarzmüller PA 2/E * Flatbed trailer * 2-axle * Disc brake system * VIN: VAVHAP2184H192498 * Tare weight: 4220 kg * Payload: 13770 kg * Gross vehicle weight: 17990 kg * Wheelbase: 5115 mm * Body length: 7 m * Body width: 2.50 m * Vehicle length: 8950 mm * Vehicle width: 2550 mm * Vehicle height: 2750 mm * Tires: 385 / 65 R 22.5 * First registration: 22.03.2004 Pgodeta I Sfopfx Abuju * Price (net) * All information without guarantee. Tel./WhatsApp:

Condition: used, Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters Pjdsttwbgopfx Abusgu

Condition: used, mileage: 233,206 km, power: 259 kW (352.14 HP), first registration: 07/2003, fuel type: diesel, overall weight: 17,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, all wheel drive, crane, Tel.: call (Contact · Phone · Mobile · WhatsApp) * Iveco Euro Trakker 190 E 35 W 4x4 all-wheel drive * Front crane with Meiller tipper * Manual transmission * Full leaf spring suspension * Air conditioning * VIN: WJMB1VPS10C119715 * Engine type: F2BE0681A * kW: 259 * Euro 3 * Displacement: 7790 cc * Unladen weight: 12,500 kg * Gross vehicle weight: 17,990 kg * Payload: 5,415 kg * Wheelbase: 4,200 mm * Vehicle length: 7,500 mm * Vehicle width: 2,550 mm * Vehicle height: 3,700 mm * Tires: 315 / 80 R 22.5---- * Front crane * Hiab 122 E S - 3 PRO * Radio remote control * 4 hydraulic extensions---- * Net price * All information without guarantee Pgedper Ex A Ssfx Abuou

Condition: excellent (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x Particleboard support, used Manufacturer: Mecalux Material color: orange Overall length: approx. 200 mm Material thickness: approx. 1.5 mm For particleboard thickness: approx. 22 mm Crossbar support: approx. 50 mm Weight: approx. 0.455 kg / piece Note: - The included particleboard serves only as a fall protection! - Further dimensions can be found in the attached drawing. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems. Delivery with our own fleet Pgedpehy Nihsfx Abueu (without unloading)