Used Emcomat 17 D for sale (48,891)

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm Fodpfxswvuf Ts Aa Eofw >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Fjdjdctnbjpfx Aa Eofw Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Max. drive power - 5.3 kW Ffjdpfxexyziks Aa Eew Quill diameter 50 mm Inner cone MT3 Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Fjdpsv Iqlzsfx Aa Ejfw Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: used, Year of construction: 2001, CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Fedpfxeyrf H Es Aa Ejfw Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T

Condition: used, fuel type: diesel, Year of construction: 2022, operating hours: 246 h, Drive: Track Serial number: E061 Rental currency: EUR Please contact KEY-TEC Sales for more information Ffjdpfxoxai Nxe Aa Eew

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 340 mm Ffjdpfxex Apd Us Aa Esw turning diameter over slide rest: 190 mm turning length: 700 mm spindle turning speed range: 40 - 3000 U/min spindle bore: 50 mm

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting - live center - bed stop Fsdpswy Hvxefx Aa Ejfw - machine feet

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Fsdpfxoxyvbns Aa Eefw Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: Fodpfx Aaoxyvbbj Esfw The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. You will find more lathes from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Ffodpfxjxyvaqe Aa Esw Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: used, Double Bench Grinder GREIF Type D 17 Fsdpfxoxciu To Aa Eefw Serial No. 05105 Grinding wheel diameter: 175 mm Grinding wheel width: 25 mm Motor power: 0.35 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Grinding spindle newly fitted with bearings - Original pedestal Required space (L x W x H): 500 x 450 x 1120 mm Weight: approx. 100 kg Good condition

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table width: 700 mm, table length: 2,000 mm, Control: HEIDENHAIN TNC-426 Travel of the X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Fodovfr Hbspfx Aa Ejfw Taper tip: ISO 50 Speed range: 20 - 3000 rpm Spindle power: 17 kW

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Working Range Centre distance: 1000 mm Ffedpsw U Ac Nefx Aa Eow Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 Ffsdpfx Aswag Stea Ejw >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2002, 1 WEISHAUPT G7/1-D, gas burner with gas train. -Output: 250-1550 kW -Version: ZD-LN -Year of manufacture: 2002 Fedpewgykcefx Aa Ejfw 2 WEISHAUPT G7/1-D, gas burner with gas train. -Output: 250-1750 kW -Version: ZM -Year of manufacture: 2002

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Additional options and equipment = - Leaf suspension = Notes = Fuel tank: 290 ltr. Air conditioning = Further information = Transmission: ZF16TX2240TO, automatic Year of manufacture: 2025 Tyre size: 315/80R22.5 Suspension: leaf suspension Fsdpfxoxg Hnls Aa Ejfw Front axle: steered Gross vehicle weight: 33,500 kg

Condition: good (used), color: red, Year of construction: 2014, General information Field of application: Construction Drivetrain Type of fuel: Hybrid Make of engine: Kubota Weights Empty weight: 1.905 kg Functional Mast: articulated arm Lifting capacity: 200 kg Lift height: 1.510 cm Working height: 1.710 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Ffodpfxsyrprxe Aa Eow Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Emission level: Stage IIIA / Tier IV interim Delivery terms: FCA, DAP, EXW Max. horizontal reach: 870 m Max swing of arm in degrees: 360 Rental currency: EUR Production country: UK Additional information Please contact Sales Department for more information

Condition: new, Year of construction: 2026, axle configuration: 4x4, fuel type: hybrid, color: other, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: kubota Weights Empty weight: 5.120 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 1.700 cm CE mark: yes Fodoyrpqhjpfx Aa Ejfw History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Emission level: Stage V / Tier V Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Rental currency: EUR Latest inspection: 2023-12-12 Production country: UK Additional information Please contact Sales Department for more information

Condition: excellent (used), axle configuration: 2 axles, first registration: 01/2009, suspension: air, color: red, Year of construction: 2009, Equipment: ABS, 2-axle low-loader Lintrailers 2LSDU 17-20 Extendable by 2.5 m 2 steerable axles with remote control BPW axles Gross weight 37,000 kg Unladen weight 8,340 kg Payload 28,660 kg Year of manufacture: 2009 Length: 11.30 m Loading height: 84 cm Dutch low-loader Ffjdoyrftrspfx Aa Eew In very good condition! Immediately operational = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Weights Unladen weight: 8,340 kg Payload: 28,660 kg Gross vehicle weight: 37,000 kg Functional Loading platform height: 84 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Further information Please contact G. Damen or W. Schischke for further information.

Condition: good (used), first registration: 10/1995, wheelbase: 7,010 mm, suspension: air, total length: 9,550 mm, total width: 2,500 mm, Year of construction: 1995, Equipment: ABS, Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 9,200 kg Payload: 34,800 kg Gross vehicle weight: 44,000 kg Functionality Tipper: Rear Maintenance, history and condition APK (periodic technical inspection): valid until 04/2026 Technical condition: good Visual condition: good Further information Contact Andre, Henri or Andre for more information. Ffodpsyntpasfx Aa Eew

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. Ffodpfxsgrki Se Aa Eew d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: used, mileage: 422,000 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, first registration: 12/2013, next inspection (TÜV): 06/2026, emission class: euro5, color: red, number of seats: 14, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Iveco Daily 50 C 17 with rear low-floor – 13 + 1 seats & 10 standing places – air conditioning Fodpfxsynvgnj Aa Ejfw * Diesel – 2,998 cc – 125 kW – 175 HP – Euro 5 EEV – Green Emission Sticker – TÜV * 13 passenger seats + 1 driver seat – 10 standing places – rear low-floor with extra-wide entry door & ramp * Auxiliary heater / radio / ABS / ASR – 6-speed manual transmission – retarder – LAWO matrix display system * Vehicle dimensions: Length: 7,550 mm x Width: 1,996 mm x Height: 3,060 mm * Tire size: 195/75 R 16 C with single tires on the front axle & dual tires on the rear axle * German vehicle – German registration document * Subject to errors, misprints, and prior sale * Please schedule an appointment for viewing & test drive * Contact: Andreas Vogel

Condition: new, mileage: 10 km, power: 184 kW (250.17 HP), fuel type: diesel, tire size: 285/70 R19.5, axle configuration: 4x2, wheelbase: 53,000 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: other, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel-air, loading space length: 76,000 mm, Year of construction: 2025, Equipment: Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, = Additional options and accessories = - Adaptive cruise control - Beacon(s) - Cushioned seat - Drivers seat comfort 5 - Preparation OBU - Radio Bluetooth - Remote central locking - Sun visor - Toolbox - Work lamp(s) = More information = General information Year of manufacture: 2025 Cab: half sleeper Technical information Torque: 950 Nm Number of cylinders: 6 Engine capacity: 7.700 cc Drivetrain Engine type: Renault Trucks Optishift 8AP Axle configuration Tyre size: 285/70 R19.5 Axle 1: Max. axle load: 5800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Suspension: leaf suspension Axle 2: Double wheels; Max. axle load: 9500 kg; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100%; Suspension: air suspension Ffjdpfex Ih Irex Aa Esw Weights Empty weight: 7.760 kg Carrying capacity: 6.540 kg GVW: 14.300 kg Max. towing weight: 17.500 kg Functional Tail lift: BERG Oprijwagens, tail lift Make of bodywork: BERG Oprijwagens Oprijwagen

Condition: used, mileage: 384,315 km, power: 228 kW (309.99 HP), first registration: 07/2004, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel-air, total length: 8,400 mm, total width: 2,550 mm, loading space length: 6,050 mm, loading space width: 2,400 mm, loading space height: 2,350 mm, Year of construction: 2004, Equipment: ABS, EBS, air conditioning, cruise control, electric window regulation, fog lights, power mirror, tail-lift, traction control, trailer coupling, = Additional options and accessories = - Heated exterior mirrors - High beam - Speed limiter - Beacons - Air suspension - Radio/CD player - Side door - Sun visor - Toolbox - Towing eye = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,967 cc Axle configuration Brakes: Disc brakes Front axle: Max. axle load: 9,000 kg; Suspension: leaf springs Rear axle 1: Twin tires; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: air suspension Weights Curb weight: 11,155 kg Payload: 16,845 kg Gross vehicle weight: 28,000 kg Functional Tail lift: B.A.R, tailgate, 1,500 kg Ffsdpfx Aaeyh Iu Uj Eew Identification Registration: BP-NL-05