Used Vm 16T for sale (859)

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Ljdpfx Afjyhph Ejpohg Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Ljdpfx Aforx Rtropohg Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 Lsdpoyf Dp Eefx Afpohg 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Lhodporx Rxtofx Afpeg Weight: 100000kg

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Lhodpfxsxc Hh Ds Afpog Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,103 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: gas, mast type: telescopic, drive type: Treibgas, LPG forklift Mast type: Telescopic Condition: Ready for use and fully functional Lodpey Rvv Nofx Afpjhg Technical condition: good Sideshift, 3rd valve, heating,

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Lhsdpfx Ajyl Avwefpsg

Condition: used, Nikon Model: VMZ-R3020 XYZ travel distances: 300 x 200 x 200 mm *Type TZ with low magnification objective: 250 x 200 x 200 mm Display resolution 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Monochrome / Color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1),3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Episcopic, transmitted and 8-segment ring illumination with 3 incidence angles *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, darkfield; right objective lens: episcopic, transmitted light, darkfield Type A: Episcopic, transmitted and 8-segment ring illumination with 1 incidence angle *white LED Power supply, power consumption AC100V-240V, 50/60 Hz / 4A – 2A Dimensions & weight Lsdpfsyiy Hbjx Afpjhg Main unit with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Installation footprint (W x D)4): 2700 x 2400 mm Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is non-binding!) We are happy to answer further questions for you by phone.

Condition: ready for operation (used), Milling table 800x500x210.50 for DMC 63V machine, used, good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Lhsdpfxoy Srnws Afpeg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 780 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 75 mm, fuel type: electric, mast type: simplex, construction height: 2,200 mm, fork length: 1,200 mm, empty load weight: 3,300 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1.000 - 2.500 kg Mast type: standard Technical condition: good Front tyres type: superelastic Front tyres condition: 60 - 80% Rear tyres type: superelastic Lodpfx Aox A I U Ejfpjhg Rear tyres condition: 60 - 80% Battery voltage: 52V Battery capacity: 300Ah Battery year: 2020 Equipped with sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windscreen, heater, STVZO road approval, full cabin, impulse control, CE certificate,

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. Lsdpfjy T R Hbsx Afpjhg • Rotary table: No • Table size: 1200 x 600 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Siemens 1FT5102-0AC71-2 - Z motor SN: E1W68186402001 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% functional, scope of delivery as per photos. Lhsdpsy Sdtlsfx Afpog

Condition: new, mileage: 400 km, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, seat heater, spoiler, tire pressure monitoring, traction control, = Additional options and accessories = - Adaptive Cruise Control - Automatic low beam headlights - Brake booster - Roof spoiler - Differential lock - Euro 6 emission standard - High beam headlights - Adjustable steering wheel - Air conditioning - LED daytime running lights - Leather steering wheel - Air suspension - Radio DAB MP3 Bluetooth 4.0 - Radio with MP3 support - Rain sensor - Rearview camera - Headlight cleaning system - Sleeper cabin - Sun visor - Auxiliary heater - Advertising (applied) = Additional information = Ledpfxoy Sxz Do Afpohg Year of manufacture: 2026 Axle brand: T Front axle: Steered Rear axle: Dual tires; Differential lock Number of cylinders: 6 Upholstery: Leather Overall condition: very good Technical condition: very good Optical condition: very good

Condition: used, mileage: 200,000 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 15, total length: 6,961 mm, total width: 1,993 mm, total height: 2,815 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 7498X ---- Why autonext GmbH? ---- One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles available immediately. Largest selection – best prices. More than 1,000 satisfied customers annually – top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ---- Excellent Condition! ---- Single owner, German vehicle, non-smoker vehicle Full service history, maintained exclusively at Mercedes Benz Next service due in 20,300 km As-new rear brakes As-new all-season front tyres Body: Maxi Tourer Number of seats: 15 Roof air conditioning Automatic climate control (Tempmatik) Auxiliary heater Electric side step Reversing camera Lane keeping assist Navigation system Microphone Roof window On request, we offer a retrofit towbar for only €599, and, if possible, an upgrade to a towing capacity of up to 3.5t ---- Special Equipment: ---- * Additional heater (air), electric * 250 A generator * Audio system Audio 15 (radio with colour display) * Outside temperature display * Single-pole battery isolator switch * Roof control unit with reading light, driver/passenger side * Entry lighting * Driver assistance system: Lane keeping assist * Digital tachograph, downloadable * Rear door windows * Rear compartment window, fixed, left rear * Rear compartment window, fixed, right rear * Rear compartment window, fixed, middle left * Rear compartment window, fixed, middle right * Rear compartment window, fixed, front left * Rear compartment window, fixed, front right Lhodsyrwv Espfx Afpsg * Automatic climate control (Tempmatik) * Fuel filter with water separator * Light and rain sensor * Front engine PTO with bracket for additional coolant compressor * Spare wheel matching road tyres * Spare wheel carrier under frame end incl. jack * Reversing camera * Interior rearview mirror * Front mud flaps * Driver's seat with comfort headrest * Comfort driver's seat in cab * Rear stabiliser bar * Reinforced front stabiliser bar * Reinforced shock absorbers * Fuel sender for auxiliary heater * Standard interior lining in load/passenger area * Fleece battery, 95 Ah * Preparation for additional heat exchanger * Reinforced front axle * Cabin insulation * Insulation for load/passenger compartment * Thermal insulation glazing (windscreen with top band filter) * Additional heater (hot water) * Cargo area sliding door partial stop ---- Standard Equipment: ---- Third brake light, adaptive brake light, driver airbag, anti-lock braking system (ABS), drive type: rear-wheel drive, washer fluid level display, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, brake assist, brake system with ABS+ASR, cab roof lining, electronic stability program (ESP), two electric windows, 6-speed manual transmission (Eco Gear), lockable glove compartment, rear door (180-degree opening angle), body/superstructure: standard high-roof van, child safety lock, fuel tank: main tank 75 litres, full partition wall in load area, lashing points/anchor rings, headlight range adjustment, model update, engine 2.1 litre – 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, smoker package, low emissions according to Euro 6, right-hand side sliding door in load/passenger area, power steering

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools Lodpfx Afsy Tw R Hepshg • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40 Lodpjy Tw Ryefx Afpohg

Condition: used, mileage: 510,000 km, first registration: 01/2019, overall weight: 16,000 kg, axle configuration: 2 axles, emission class: euro6, Colour: light blue, Euro 6 engine, defective DPF!! SOLD AS IS!! Lhedjxagf Rspfx Afpjg

Condition: used, mileage: 405,500 km, first registration: 11/2018, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Air conditioning, light blue color, Euro 6 engine, ABS, disc brakes, on-board computer, electric windows, specification upon request, EBS, air suspension, radio, SOLD AS IS Ledjxaggbopfx Afpehg

Condition: ready for operation (used), Baumüller GNF 132 MV Motor SN: 80600154/R1 with Baumüller GHT 612/42 Tachogenerator 00339746 SN: 508006016, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Lhedpfx Afsy R Ircjpeg

Condition: new, Main Motor Power 15/18.5 kW Table Size 2000x900 mm T-slot Size 5/22/165 mm Ledpsy T H Smjfx Afpehg Table Load Capacity (Max.) 1600 kg X, Y, Z Travel 1800, 900, 600 mm Spindle-Table Distance 112-712 mm Spindle-Column Distance 950 mm Spindle Speed 10,000 rpm, Direct Drive Spindle Taper BBT50 Spindle Diameter 190 mm X, Y, Z Rapid Traverse Rate 12/12/12 m/min X, Y, Z Motor Power 4.5/4.5/4.5 kW Cutting Feed Rate 8000 mm/min Magazine Capacity 24 Stations, Arm Type ATC Max Tool Diameter 110/220 mm Tool-to-Tool Change Time 2.91 sec Control Unit Mitsubishi M80V - Fanuc 0i-MF PLUS Drive and Encoder Mitsubishi - Fanuc Main Motor Torque 143/236 Nm X, Y, Z Guideway Load Capacity 77.8/159 Nm X, Y, Z Guideway 55/45/Box Type mm X, Y, Z Leadscrew Diameter 55/55/55 mm Positioning Accuracy +/-0.006 Repeatability of Positioning Accuracy +/-0.004 Required Total Power 34.5 kW/40 kVA Machine Dimensions 5900x4300x3500 mm Net Weight 16,000 kg

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm Lhedpey Ty Afofx Afpog max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m

Condition: good (used), Year of construction: 1998, Bridgeport VMC1000 CNC Vertical Machining Centre (1998) Description: Type of CNC Heidenhain, Table Size: 1150 mm × 490 mm, X-Axis Travel: 1000 mm, Y-Axis Travel: 500 mm, Z-Axis Travel: 500 mm, Spindle Taper: BT 40, Spindle Speed: 8000 RPM, Number of tool pockets: 22 Ljdpfoy Hx Igox Afpehg

Condition: new, Year of construction: 2025, machine/vehicle number: DGBR1013S40457K, fuel type: diesel, motor manufacturer: Perkins 4016-TAG2A, General information Field of application: Construction Weights Empty weight: 22.100 kg Functional Generator capacity: 2.200 kVA Dimensions of cargo space: 1219 x 234 x 290 cm CE mark: yes Other information Fuel consumption: 326 Liter / Hour at 75% Load Generator: Leroy Somer LSA52.3S Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 2000 l Lhedpor Idbrefx Afpeg Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 20221021021, fuel type: diesel, motor manufacturer: Iveco CR16TE1W.S550, General information Field of application: Construction Weights Empty weight: 4.500 kg Functional Generator capacity: 660 kVA Dimensions of cargo space: 470 x 200 x 240 cm CE mark: yes Other information Lhjdoxbwvpjpfx Afpjg Fuel consumption: 86.6 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), mileage: 294,785 km, power: 210 kW (285.52 HP), first registration: 03/2022, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,320 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 7,270 mm, loading space width: 2,480 mm, loading space height: 2,440 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, tail-lift, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Lane departure warning - Fabric upholstery Number of axles: 2, configuration: 4x2, unladen weight: 7,090 kg, gross weight: 16,000 kg, total tank volume: 200 liters, trailer hitch, kingpin diameter: 40 DIN, fifth-wheel coupling: fixed, number of differential locks: 1, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, GPS navigation, color: black, heated mirrors, lighting type: halogen lamp, lane departure warning, heated seat, bluetooth, engine output: 210 kW (282 HP), fuel: diesel, Euro 6, transmission type: manual gearbox, transmission brand: Volvo, gears: 8, clutch pedal, power steering, ABS, ASR, starter battery, central locking, seating arrangement: 1+1, seat cover: fabric, seat adjustment: manual, tail lift, tail lift type: rear platform, tail lift capacity: 1,500 kg, tail lift manufacturer: Palfinger, tail lift material: aluminum, tail lift size: 180 x 252 Transmission Transmission: VOL, 8 speeds, manual gearbox Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steering; tire tread left: 12 mm; tire tread right: 12 mm; suspension: leaf spring Axle 2: twin tires; tire tread inner left: 10 mm; tire tread outer left: 10 mm; tire tread inner right: 11 mm; tire tread outer right: 11 mm; suspension: air suspension Weights Lhedpfxsycch Ie Afpsg Unladen weight: 7,090 kg Payload: 8,910 kg Gross vehicle weight: 16,000 kg Functional Tail lift: Palfinger, rear platform, 1,500 kg Loading platform height: 108 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Leasing rate: €826 per month (default, 60 months); please request more information and terms Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-turning inventory • Recognizable quality • Competitive prices • Fair business practices • Multilingual staff • Customer-oriented service • Import and transport support • (Export) license plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty package.