Used Wmw Center Lathe for sale (18,824)

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, Maximum height between centers: 400 mm Distance between centers: 2000 mm Dksdpfxozql D Ho Al Seu 26 spindle speeds from 4.5 - 1400 RPM - driven upper slide rest - rapid traverse - Forkardt 400 mm

Condition: used, functionality: fully functional, This Weiler Commodor lathe comes from a technical school and, as such, has low operating hours. Lightly used and not heavily loaded – a tidy, reliable machine with a long service life ahead. Turning length: 1,000 mm Dkjdpfx Alew U Sx Ho Sou Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed range: 25 – 2,000 rpm Number of speed steps: 18 Spindle bore: Ø 56.0 mm Spindle taper: MK DIN 228 / MK 4 Spindle flange: DIN 55027 / size 6 Cross slide travel: 150 mm Bed width: 310 mm Feed rate – longitudinal: 0.022 – 0.8 mm/rev Feed rate – cross: 0.011 – 0.4 mm/rev Voltage: 380 V Total required power: 7.5 kW

Condition: ready for operation (used), functionality: fully functional, turning diameter: 1,700 mm, center height: 630 mm, center width: 4,000 mm, spindle speed (max.): 400 rpm, empty load weight: 4,000 kg, TECHNICAL DETAILS Centre height: 630 mm Swing diameter over bed: 1,300 mm Swing diameter over carriage: 1,000 mm Swing diameter over removable bed section: 1,700 mm Centre distance: 4,000 mm Bed width: 700 mm Spindle bore: 120 mm Spindle speed: 2.8 - 400 rpm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,800 x 2,200 x 2,000 mm Unladen weight: 11,000 kg Transport packages: 2 EQUIPMENT Documentation Three-jaw chuck Four-jaw chuck Removable bed section Quick-change tool holder Fixed steady rest Travelling steady rest Dedpsyua Ivefx Al Sjku

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 650 mm center height over bed 140 mm centre distance 650 mm bed width 155 mm spindle taper KK 4 CAMLOCK DIN 55029 spindle bore 40 mm turning speed range - stepless 4.000 U/min 4-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 7,5 kW taper in tailstock-quill MK 2 dia. of quill 30 mm quill stroke 80 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display Dkodpfx Aoz Abwysl Sou - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder

Condition: good (used), Year of construction: 1989, 1 used lathe with lead screw and feed spindle Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Serial number: 89-1314 Dodpoz Adv Eefx Al Soku Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: used, Year of construction: 1981, machine/vehicle number: 283, Item No. 26208 Technical Data: - Maximum turning height 120 mm - Maximum turning diameter 450 mm - Maximum swing over bed 250 mm - Spindle bore 23 mm - Spindle mounting with threaded nose DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - transverse 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. approx. W 1200 x H 1250 x D 650 mm - Weight approx. approx. 700 kg - Including: - 3-jaw chuck - Quick-change tool holder - Rotating center - Separate tool cabinet with various accessories Dedpfx Aezyl H Hel Sjku

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Dodpfxjx Uw S Hj Al Sjku Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: used, Year of construction: 1960, turning diameter over bed 480 mm turning diameter over slide rest 260 mm turning length 1500 mm turning speeds 90 - 1120 U/min centre height 240 mm spindle bore 52 mm total power requirement 7,5 KW weight of the machine ca. 2,3 t dimensions of the machine ca. 3,0 x 1,3 x 1,5 m Engine Lathe Dkjdpfxsy Umb De Al Sju - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point

Condition: used, turning diameter over bed 930 mm turning diameter over slide rest 630 mm turning length 6000 mm turning dia. in gap 1250 mm spindle diameter 95 mm Dedeyuqd Uopfx Al Ssku speed 8-800 (x24) U/min total power requirement 22 kW weight of the machine ca. 1100 t

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Machine Specification EUROPA eturn VS390 Swing over bed 390mm Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Dsdponzhtwefx Al Ssku Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Condition: excellent (used), Year of manufacture: 1973 Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dkodpfx Aozyyn Ssl Seu Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point Dsdszd Tycopfx Al Sjku >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t Dedpfx Asu Tq U Iel Soku dimension machine approx.LxWxH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: excellent (used), Year of construction: 2001, Description to follow! Dkodpfez Hp Rmjx Al Sju

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: Dsdpfx Aljv Rgzwj Seku 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap 320 mm turning speeds 75 - 2000 U/min centre height 160 mm Dsdpfx Ashwavrsl Ssku spindle bore 38 mm tailstock quill taper MT 3 connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools

Condition: used, functionality: fully functional, Lathe Type: Ucimu brf150 380V Distance between centers: 800 mm Dedpfx Alewurt Ss Ssku Spindle bore: 35 mm Tool height: 25 mm Swing diameter over cross slide: 180 mm Swing diameter over bed: 320 mm 4-jaw chuck MC2 in tailstock

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm Dodpfevgmlnox Al Soku turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm coolant attachment *

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0518100425, center height: 260 mm, center width: 2,000 mm, spindle speed (max.): 2,000 rpm, bed width: 220 mm, control type: manual, TECHNICAL DETAILS Centre height: 260 mm Swing over bed: 460 mm Distance between centres: 2,000 mm Bed width: 220 mm Dsdsy Hicuepfx Al Sjku Spindle bore: 82 mm Spindle speed range: 25 - 2,000 rpm MACHINE DETAILS Control: Conventional Dimensions & weight Dimensions (L x W x H): 3,350 x 1,000 x 1,530 mm Net weight: 3,000 kg Transport packages: 1 unit EQUIPMENT Quick-change tool holder Three-jaw chuck Digital readout: SINO SDS6-3V

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 Djdjwa I Shepfx Al Soku total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: used, turning diameter over bed / mm Dksdpfx Ajzu Dabol Sju turning length / mm centre height / mm

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Dkjdpfjzf Nd Hex Al Sju Machine weight: 1760 kg

Condition: good (used), Year of construction: 1989, 1 used lead screw and spindle lathe Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Dsdpfxszuthhj Al Seku Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Dkjdeu Ixzbepfx Al Sou Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: used, Year of construction: 1960, Technical details: turning diameter over bed: 630 mm turning diameter over support: 320 mm turning length: 2800 mm centre distance: 2800 mm turning dia. in gap: 700 mm length of gap: 450 mm spindle bore of work spindle: 70 mm weight of the machine ca.: 4,4 t dimension machine approx.LxWxH: 4,7 x 1,5 x 1,5 m Thread cutting possible Accessories: 4-jaw chuck various tips Dodpfju Ix A Eex Al Soku Gear wheels Jaws and small parts *