Used Uk 350 M for sale (73,246)

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, tire size: 385/55 r19,5, Fine-grained steel welded construction, fifth-wheel plate with replaceable double kingpin. Note! For frame neck height of 30 mm, the truck wheelbase must not exceed 3,700 mm! Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note! To attach straps in conjunction with sideboards, the sideboards must be opened! Not permitted in the neck area! 10 additional pairs of lashing rings recessed into the outer frame, each rated at 2.5 t, outer frame with Load-Lock profile for lashing straps. Note! Not usable with sideboards! 24 t, two-speed landing gear, single-sided operation, with straight lower section, without thrust compensation. Folding front supports extendable and tiltable outwards in front of the bulkhead. In driving position, set as far inward as possible (for detaching under load), without supports. Extendable ladder at the rear, side door retainers, chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of and behind each axle, antispray mud flaps behind each axle, rear underrun protection. Heavy Blocker rear underrun protection, heavy duty pallet stops on both sides, approx. 20–25 mm high, with lashing option every 200 mm. Load height is reduced by approximately 20–25 mm. Plastic toolbox included. SAF disc brake axles, air suspension, without lift axle. 2-line compressed air braking system, spring-loaded parking brake, 2 tamperproof coupling heads at the front, no connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable. Caution: The trailer may only be towed by tractors that ensure the effectiveness of ABS! With lift and lower valve, vehicle stability control system. 24 volt multi-chamber lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red contour lights at the rear, 2 × 7-pin and 1 × 15-pin tamperproof sockets at the front, no connection cable included. Floor: Front area with steel floor and anti-slip coating, phenolic plywood panels approx. 30 mm thick, transverse joints with omega insert, longitudinal bearers for high point loading capability, suitable for forklift axle loads up to max. 7,100 kg, steel/chequer plate surface in wheel area. Front bulkhead/corner stanchions: Height 2,580 mm, steel corner posts in volume design, release system for side curtain at front bulkhead, inner lower edge equipped with steel impact protection at approx. 140 mm height. Intermediate stanchions: 3 pairs of sliding posts adjustable along the full length, with four-fold insert pockets and long lower pocket, 3 pairs of upright positions, aluminium insert slats. Rear corner stanchions in steel up to lower edge of roof, curtain attachment with round tube and tensioning ratchet, rear portal doors, double-leaf with two internal locking bars per leaf. Nwodpskyrlwofx Ahzsg Curtain with welded horizontal and vertical belts, tension latches made of stainless steel, customer lettering on the rear portal. Roof: Sliding roof cover, rear end liftable, roof can be pushed from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain colour: white. EcoLift - roof liftable by approx. 380 mm with gas spring assist, Anti-Ice system with central hose and automatic ventilation. Country of registration: Germany, type approval in accordance with EC 2007/46, load securing certificate according to EN 12642 XL (only valid in conjunction with 4

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Ks Kesmak KME 350 Shaft cutting diameter: 350 mm Square: 340 x 340 mm Rectangle: 340 x 415 mm Hydraulic control of the bandsaw arm Hydraulic control of the vise Hydraulic blade tension sensor PLC controller Mechanical feed with rollers in the vise Nsdjy H Rbfjpfx Ahzswg Electronic setting of cut part length and quantity Feed cycle up to 6000 mm, any length and quantity Membrane control panel Bundle cutting possible (upper clamp) Stepless blade speed adjustment: 20-120 m/min Roller feeder 1200 mm Documentation Year 2024

Condition: used, mileage: 191,305 km, power: 136 kW (184.91 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 2,339 kg, maximum load weight: 1,161 kg, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, parking heater, soot filter, Non-binding offer - Subject to alterations and prior sale - Sale is subject to exclusion of any warranty - All information without guarantee! Nwsdpfxew Hxnme Ahzsg

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t Nsdpfelilgcjx Ahzjwg

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm Njdpfxelilfbo Ahzjwg strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) Nwedpjyvt Exjfx Ahzog INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 P, manual The UK 300 P is a manual table saw (pneumatic clamping) with simple safer Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P has a compact design with clear operation. The saw cut is done manually by down into the material to be processed. The material is clamped using two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area. equipment Compact, closed design with clear operation two pneumatic clamping cylinders Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Mist spray device for air-oil cooling workflow 1) Setting the cutting angle 2) Loading the material 3) Pneumatic clamping of the material 4) Press the start button to start the saw blade Nwedpfsidqbbsx Ahzog 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw Nwsdjgwt S Eepfx Ahzsg • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 77,890 h, functionality: fully functional, clamping force: 1,274 kN, screw diameter: 40 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 130 t Tie bar distance: 420 mm x 420 mm Screw diameter: 40 mm MACHINE DETAILS Operating hours: 77,890 h Note: When purchasing multiple items from the same location (see offers below), the lower applicable costs for dismantling and loading will be granted. Nodpfjy Ewpmsx Ahzjwg

Condition: good (used), mileage: 189,910 km, power: 315 kW (428.28 HP), first registration: 03/2013, fuel type: diesel, fuel: diesel, color: grey, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Weights Unladen weight: 24,180 kg Payload: 7,820 kg Njdpfsyiui Dox Ahzjwg gross vehicle weight (GVW): 32,000 kg Functionality Mast: Telescopic (4 sections) Mast length: 35.5 m Lifting capacity: 2,650 kg Superstructure make: MKG HMK T A2-A2 CE marking: Yes Condition Technical condition: Good Visual condition: Good EURO 5 L PACKAGE 430 HP DRIVE 8X4 BB WHEELBASE 510 CM LEAF SPRING SUSPENSION AXOR CAB WITH AIR CONDITIONING, NAVIGATION, CAMERA SYSTEM MANUAL TRANSMISSION MANY TOOLBOXES MKG HMK 350 TA2-A2 ASSEMBLY CRANE/ROOFER'S CRANE + JIB 4X HYDRAULIC EXTENSION + 3X MANUAL OIL COOLER FOR CRANE HYDRAULICS LARGE HYDRAULIC WINCH 2500 KG !!! 4 X OUTRIGGERS REMOTE CONTROL + UPPER OPERATION WORKING HEIGHT 35.5 METERS ALL HOOKS AND PULLEYS PRESENT FOLLOW US ON INSTAGRAM: GEURTSTRUCKS

Condition: new, Year of construction: 2026, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters Nwsdsu Rpibepfx Ahzog - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Year of construction: 2002, condition: used, x-travel 210 mm z-travel 350 mm max. loading 25 kg Distance C/Z-axis (mm) 270 mm max. test diameter (mm) 300 mm Rotation axis C (turntable) 0° 90° 180° 270° diameter of rotary table 150 mm Measuring path R-axis 170 mm required space L2,0 x B0,8 x H0,82 m Scope of delivery: - Form measuring system F1004/350 - Work table - Rotary table (rotation axis C) - All documentation - Software TURBO FORM 8.21 + licences - Accessories (see pictures) Condition: - As good as new - Functional Nodpfx Aherxxc Hszowg Maintenance: - Last inspection on 03/08/2021 - Test report from Jenoptik available

Condition: new, incl. tiltable – closed load platform with perforated tracks / drive-on possible without ramps / very lightweight Technical Data: • Brand: Martz • Model: TIEFLADER 350 1.8T • Vehicle Type: Car transporter • Vehicle Condition: New • First Registration: Without first registration • TÜV inspection: 2 years from first registration • Internal dimensions (LxWxH): 353 x 184 x 0 cm • External dimensions (LxWxH): 548 x 240 x 64 cm • Perm. gross weight: 1,800 kg • Unladen weight: 379 kg • Payload: 1,421 kg • Chassis: Low-loader (wheels beside platform) • Tires: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Perforated steel running tracks, ideal for secure lashing • Continuous anti-slip and water-resistant phenolic plywood floor between running tracks • incl. wheel chocks • Tiltable platform – allows for ramp-free drive-on • Very low chassis for reduced approach angle • Tiltable platform (10.5° approach angle) • Extremely lightweight trailer with stable construction • Additional 8 lashing rings mounted in the side floor • Braked KNOTT rubber torsion axle • Automatic reverse function • KNOTT overrun device and parking brake • Very robust bolted, reinforced V-drawbar • 13-pin plug • Reversing lights • Large-dimension safety lighting • Integrated rear fog light • Rear frame lighting recessed • Lateral position marker lights mounted at the rear • Jockey wheel fitted Nodpfjx Tbiyox Ahzswg Accessories retrofittable – please enquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Storage box • Reversing lights • Lashing straps • and more New vehicle with warranty and TÜV certificate. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration papers can be dispatched in advance or short-term number plates (Germany) can be provided - Export plates incl. customs declaration available Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! We have been specialist dealers and offer repairs for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions, and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including continuous ramp 150cm / Low loading platform / Lashing eyes recessed in floor Technical Data: • Make: Martz • Model: BAU-3 350/2 S • Vehicle type: Construction Machinery Trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 350 x 182 x 25 cm • External dimensions (LxWxH): 552 x 241 x 182 cm • Loading height (floor): 34 cm • Gross vehicle weight: 2,700 kg • Unladen weight: 630 kg • Payload: 2,070 kg • Chassis: Low loader (wheels beside platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walk-on steel mudguards with continuous safety anti-slip strips • Continuous phenolic plywood floor, jointless, anti-slip and waterproof • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Steel loading ramp pivoted on shaft • Strong eccentric catches • Stake pockets at all four corners for tarpaulin frames, mesh sides, side wall extensions, or high front wall • Rugged support legs on the loading ramp • Assisted ramp lift • Very low chassis for minimal approach angle • With excavator bucket rest • 8x recessed side lashing rings in frame profile (600dAN/kg), TÜV certified • Maintenance-free KNOTT rubber torsion axles • Reversing automatic system • KNOTT overrun coupling and parking brake • Very sturdy reinforced bolted V-drawbar • 13-pin plug • Reversing lamp • Large dimension safety lighting • Lane marker lights at rear • Integrated rear fog lamp • Rear frame lighting recessed • Central automatic jockey wheel Optional accessories – enquire if interested: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing lamp • Lashing straps Nwsdpfox Tixisx Ahzeg • and more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or temporary license plates (Germany) can be provided - Export plates incl. customs clearance available All descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! We have been your professional dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, mistakes, and prior sale excepted

Condition: used, mileage: 20 km, power: 96 kW (130.52 HP), first registration: 10/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,474 mm, total height: 2,530 mm, loading space length: 3,533 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal ID: Errors and prior sale excepted! SPECIAL EQUIPMENT * Airbag (passenger side) * Interior mirror including heated rear window * Cargo area protection package 1: "Easy Clean" load compartment floor - wheel arch lining - high side wall lining * LED lights in the cargo area * Socket: 12-volt outlet in the cargo area (D-pillar) * Partition (metal) with window * Central locking with remote control – additionally with a second, folding key with remote control Nedpfxjymicgj Ahzjwg FURTHER EQUIPMENT * 1 battery * Front axle load increase to 1850 kg * Airbag, driver’s side * Anti-lock braking system with electronic brakeforce distribution incl. ESP with traction control - hill start assist - crosswind assist - emergency brake assist - rollover protection - emergency brake support incl. emergency brake light * Exterior mirrors, electrically adjustable and heated – with integrated turn signals * Battery: battery runtime, programmable to 10 min * On-board computer with consumption and mileage information (e.g. range remaining) as well as outside temperature display and Ford ECO-Mode * Twin rear doors with 180° opening (without window) * Tachometer * Third brake light * Power windows – driver’s side one-touch up/down function * Ford Easy Fuel – capless refueling comfort system and misfuelling protector * High-performance alternator * Lockable glove compartment * Interior lighting with delay function and front reading lamps * Front air conditioning incl. dust and pollen filter * 70-liter fuel tank * Load space lighting * Steering wheel: leatherette-wrapped * Steering column adjustable for height and reach * MyKey key system – individually programmable second key * Fog lights * Emergency call assistant * Package: Technology Package 9 – heated windscreen – wipers with rain sensor – front and rear park pilot system – active emergency braking assist (camera-based) – lane keeping assist with driver fatigue warning and high beam assist, also with lane departure warning – headlight assistant with day/night sensor – cruise control – fog lights – Ford audio system * Diesel particulate filter * Radio: Ford audio system with radio and DAB+ – MyFord Dock – FordPass Connect – speakers, antenna – audio remote control on steering wheel – Bluetooth interface – USB port – hands-free system * Wheels: hub caps * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 16 with 235/65 R 16 tires * Dipped headlights: halogen headlights with daytime running lights * Automatic sliding door entry lighting * Sliding door, right side * Rear mud flaps * Side protection moldings * Power steering * Seat belts – front seatbelt tensioners and force limiters * Seats: Seat package 13 – driver’s seat, 4-way adjustable – dual passenger seat with storage under individually folding seat pads – height-adjustable headrests – tray integrated into dual passenger seat (fold-out) – driver’s inboard armrest – manual lumbar support (driver’s seat) – fabric upholstery * Start-stop system * Rear bumper with integrated step * Partition (plastic) at B-pillar height * Air recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control * Second remote control key * Overhead storage compartment, front ... and much more.----Single owner. German specification. Errors and prior sale excepted!

Condition: new, feed pressure 10,0 bar intake capacity 345 L/min Effective free air delivery 228 L/min Receiver capacity 50,0 Ltr. motor 230 V power capacity 2,2 kW weight of the machine ca. 51,0 kg. dimensions of the machine ca. 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block Njdpoxaaurofx Ahzjwg - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - Solid rubber wheels - a branded pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm Nsdpfx Ahoxabk Ujzowg saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V -Fan wheel: Ø 350/215 mm Nodpfx Ajuu U Tlohzjwg -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo -Dimensions: 350/400/H1130 mm Nwsdpfx Asgal A Djhzjg -Weight: 80 kg

Condition: good (used), Crane block, deflection pulley, cable pulley, steel cable pulley, cable deflection pulley, crane, block and tackle -Crane block: with guide rails -Rollers: Ø 350 mm / 4 grooves -Number: 8x pulley available -Price/delivery: per piece -Transport dimensions: 650/330/H350 mm Nwedpfx Ahemu Rm Djzog -Weight: 50 kg/pc.

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange Njdpfxot Sz Evo Ahzowg -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Condition: excellent (used), Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear Nodpfjt Sz Htox Ahzjwg -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar Nwjdsvyq Duopfx Ahzog -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm Nwjdpfx Ahedxxrqszeg -Weight: 132 kg

Condition: good (used), Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment Nwjdpfx Ahelzmxgjzsg -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg