Used 20-29-557 Edge Sanding Machine for sale (82,270)

Condition: not inspected (used), Number of sanding units 4 St Lodot Tqy Espfx Ah Sehn sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Ljdpfx Aheyrty Tj Sohn Disc unit for defibering - two gr...

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine 20-800mm workpiece diameter 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility Lsdpsz Stwvefx Ah Sehn 4 number of grinding spindles 26,000rpm grinding spindle speed

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Lhjdsxix Hxjpfx Ah Son Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Lodswzzivspfx Ah Sshn Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Lhedpfx Asw S Dmdoh Son Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: Lhodpfx Ahoc Tmygs Ssn • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Lhsdpfx Ahod E Ixzo Sjn Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, For profiling and edge-milling windows, doors, individual components and similar items with all-round profiles Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Lodeztv Dpspfx Ah Sjhn

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Lhodpfsztbutox Ah Sjn Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Lhsdpezuyqiofx Ah Sjn Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Year of construction: 1989, condition: used, Used Machine Lhodpfszpblqox Ah Ssn Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm Lhodpeuf N Scefx Ah Son belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Lhodjz Rgpcepfx Ah Sen Corner rounding unit Profile scraping unit Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW Ljdpfx Ahszk Nmro Sshn - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Used bending machine / press / edge press Brand: SAFAN Lsdez It Sqepfx Ah Sshn Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Electrical and hydraulic diagrams Rear safety gate Side safety gates

Condition: excellent (used), SCM internships in excellent condition Lsdpst Hkq Rsfx Ah Sshn

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Technical data Note: Ljdpfx Aezuyhush Sohn The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, minimax me 35 tr s edge banding machine by Holzkraft -Exhibition machine- Dimensions and weights: - Length (product) approx.: 3314 mm - Width/depth (product) approx.: 1085 mm - Height (product) approx.: 1300 mm - Weight (net) approx.: 623 kg Equipment: - Roller edge turning table: 730 mm - Anti-adhesive spray unit - Pre-milling unit: with two diamond milling cutters - Edge preheating device: with ceramic infrared lamp - Glue pot quick-change kit - Edge banding unit - Corner copying unit - Flush radius milling unit: manually switchable - Radius draw blade unit: Manually switchable, with numerical position indicator - Flush draw blade unit: Manually switchable, with rotating copying device - Buffing unit Flush radius milling unit: - Flush radius milling unit power input: 2 x 0.35 kW Lhsdpfx Aov Nhhpoh Son - Flush radius milling unit milling cutter diameter HM: 55.3 mm - Flush radius milling unit milling cutter speed: 12000 min¯¹ - Flush radius milling unit extraction port diameter: 2 x 60 mm Corner copying unit: - Corner copying unit power input: 0.35 kW - Corner copying unit tool diameter: 58 mm - Corner copying unit speed: 12000 min¯¹ Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Gluing unit: - Glue pot power input: 0.25 kW - Glue pot working temperature: 190 °C - Glue pot extraction port diameter: 60 mm - Glue pot filling capacity: 0.8 kg Pneumatic connection: - Operating pressure: 6.5 bar - Air consumption: 470 l/min Feed: - Feed power input: 5 kW - Feed speed: 7 m/min Edges: - Edge thickness roll material: 0.4 – 3.0 mm Pre-milling unit: - Pre-milling unit extraction port diameter: 2 x 80 mm - Pre-milling unit power input: 3 kW - Pre-milling unit milling cutter speed: 7200 min¯¹ - Pre-milling unit diamond milling cutter diameter: 80 mm - Pre-milling unit milling cutter height: 56 mm - Pre-milling unit material removal: 0.5 / 2 mm Draw blade units: - Radius draw blade: 2 mm Buffing unit: - Buffing unit power input: 2 x 0.14 kW - Buffing unit speed: 2800 min¯¹ Workpiece: - Workpiece thickness: 8 – 50 mm - Workpiece length min.: 120 mm - Workpiece width min.: 110 mm - new exhibition machine -

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Lodswiv Dkjpfx Ah Sohn Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Year of manufacture: 2017 Lhjdpfx Ahozuyixo Ssn Technical data Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness Ljdpfxsvnv Uho Ah Sshn - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine Ledpfx Ahowlzz Ts Sshn with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) Lhedpfxswmdbrj Ah Sjn up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: excellent (used), Year of construction: 2015, Glass thickness: Adjustable from 3 to 28 mm Max. sheet dimensions: Up to 2000 x 3000 mm Power consumption: Approx. 13.8 kW This 8-spindle machine is well-maintained and in good condition. Approx. 15,000 m run. Last service in fall 2025. Accessories: Water tank, pump, and spare parts. Dimensions: Width: 6,500 mm Depth: 1,600 mm Height: 2,600 mm Weight: 3,200 kg Lhedpfxsz Ekcbj Ah Ssn Condition: Very good, second-hand