Used Abs Schwabe 100/160 for sale (33,725)

Condition: used, Tank capacity (litres) Bodevpfhyopfx Amislh 100 Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Tank capacity: 200 liters Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve ATOS ORSTA hydraulics Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg Bljdpfxsi Dnpxs Amijh If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). Bsdpfx Amod Aqqzeijlh • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Bljdjy Ur Hlspfx Amijh Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Bsdpfey Rn A Iox Amiolh Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection Bljdpfxsy T Ed Io Amieh HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Year of construction: 2003, condition: used, 2003 NeuAr Z-NC 100 Electronic Discharge Machine Work Tank Dimension 1,400 x 900 x 600mm. Table Dimension 1,000 x 500mm. Maximum Table Load 2,000kg. Axis Travel 'X'=600mm, 'Y'=500mm, 'Z'=250mm. Distance From Head To Table 780mm. Maximum Electrode Weight 250kg. S/No. HU100203 (2003). Bledjy U Ndhepfx Amish Description With Dielectric Tank (900L) & Spinflo Oil Cooler. Overall Dimensions W3,500 x D2,300 x H2,500kg. Machine Weight 3,500kg.

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Bodpfjxwk E Aex Amiolh Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: used, Can Fastening and Embossing Machine With associated controls and conveyor Please note the items in this lot 30466-426 are simultaneously offered in the combination lot 30466-425 as a complete line. The separte parts of the complete line 30466-425 are offered as individual lots 30466-426 to 30466-433 Bidders can bid on the complete line and/or on individual lots. Bedoy Ux H Eopfx Amislh Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Bodsvf E Avjpfx Amiolh Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Manufacturer: Gendron Type: RU 28-100 Bjdpfx Amswnhkmoislh Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 1,100 mm, total width: 1,800 mm, total height: 2,850 mm, Empty weight: 6.000 kg - Year: 1981 Bedsxywkqspfx Amislh - Documentation available: No - CE certificate present: No - Serial number: 10340 - Drive system: Conventional - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, rubber expansion compensator, rubber compensator, rubber compensator Bledpfx Ameza Uubeish -Manufacturer: Elaflex, rubber compensator -Type: DN200 PN16 BL 160 -Nominal diameter: Ø 200 mm -Material: Bellows rubber -Bolt circle: Ø 295 / 22 mm -Number: 5x compensators available -Price: per piece -Dimensions: Ø 340 x 150 mm -Weight: 19.4 kg/pc.

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min Blsdpfx Aoy Ur A Tomieh max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: refurbished (used), “SGM DIS 100” for Sale Bjdjy U N Exepfx Amielh Manufacturer: SGM Magnetics Type: DIS 100 Belt widthness: 1.000 mm (New belt) Included: – New Control-unit Eddy Current Separator is overhauled, sandblasted and painted.

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Yale, hydraulic cylinder with spring return, single-acting, 100 mm stroke -Type designation: YS-23/100 -Piston rod: Ø 42 mm -Lifting capacity: 23 t -Operating pressure: max. 700 bar Bodowtmznopfx Amielh -Number: 3 cylinders available Price: per piece -Dimensions: 150/85/H195 mm -Weight: 7 kg/pc.

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Type: KONTEC KSG 100 Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Bedoy Uvk Iopfx Amislh Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), mileage: 36,128 km, power: 120 kW (163.15 HP), first registration: 01/2019, fuel type: diesel, tire size: 215/75R16, axle configuration: 4x2, wheelbase: 4,040 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 7, total length: 6,250 mm, total width: 2,120 mm, total height: 2,420 mm, loading space length: 2,900 mm, loading space width: 2,040 mm, loading space height: 380 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual Bljdpoza Tv Defx Amijh - Radio/cassette - Fabric = Notes = Configuration: 4x2, Payload: 1025 kg, Unladen weight: 2475 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 3000 kg, Tow hitch, Cabin type: Double cab, Air conditioning, Number of airbags: 2, Parking assist: None, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Maintenance manual, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 120 kW (161 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Rear step, Roof rack: None, Rear closure: Tail lift, Central locking, Seats: 7, Seat arrangement: 1+2+4, Seat covering: Fabric, Seat adjustment: Manual, double cab, open cargo bed, air conditioning, navigation, tow hitch, 36,000 km, Tire type: All-season tires = Additional Information = Axle configuration Tire size: 215/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,475 kg Payload: 1,025 kg GVW: 3,500 kg Functional Height of the loading area: 90 cm Maintenance APK (Technical Inspection): valid until 10.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €309 per month (delivery van, 72 months); Ask for more information and conditions Identification License plate: V-268-VP

Condition: good (used), puncher 100 t square edge steel 50 x 50 mm round bar steel 50.0 mm L-beam 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.) Ø 30.0 x 26 mm shear: flat material 600 x 15 mm throat 300 mm work stroke 80.0 mm work height max. 1165 / 960 mm total power requirement 9.0 kW weight 2250 kg range L-W-H 2050 x 1200 x 2050 mm well-maintained condition (!!) current new price approx. 30.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations * Flat steel shears * Profile steel shears * Hole punch * notching station - driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at hole punching station - Material scraper - Lateral storage options - 2x freely movable foot switches Bljdpey Uy Spjfx Amijh - Many accessories included in the scope of delivery * swiveling machine lamp * Various punch dies * Spare blades for the flat steel station ... etc. - Operating instructions (PDF)

Condition: excellent (used), Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -each cylinder with hand pump Bodpfjb A Hvlox Amijlh -Number: 3 cylinders available -Price: per piece

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm Blodpfx Aeyzfu Aomieh -Wave: 16 teeth -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

Condition: good (used), mileage: 67,886 km, power: 118 kW (160.44 HP), first registration: 11/2023, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,930 mm, total width: 2,120 mm, total height: 3,320 mm, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 2,300 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift Bledoy T Ewhspfx Amieh - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, dual tires, unladen weight: 2965 kg, gross vehicle weight: 3500 kg, cabin type: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: None, electric windows, electric mirrors, radio/cassette, Carplay, color: White, heated mirrors, lighting type: halogen lamp, air conditioning, Bluetooth, engine power: 118 kW (158 hp), fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: additionally extended, side paneling, roof rack: None, side doors: 1, rear closure: tail lift, central locking, number of seats: 3, seat arrangement: 1+2, seat covering: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, tail lift load capacity: 750 kg, tail lift manufacturer: Sorensen, tail lift material: steel and aluminum, closed cargo box, loading platform, side door, air conditioning, dual tires, 67,000 km, spare tire, spare tire tread depth: 8%, tire type: summer tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 195/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Trapezoid suspension Axle 2: Dual tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 7 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,965 kg Payload: 535 kg GVW: 3,500 kg Functional Tail lift: Sorensen, tailgate, 750 kg Loading area height: 90 cm Maintenance APK (Technical Inspection): valid until 11/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: 544 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, axle configuration: 3 axles, first registration: 07/2023, total width: 2,550 mm, total height: 900 mm, Year of construction: 2023, Rear axle 1: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Blodpfx Amjzbaq Rsish Rear axle 2: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 3: Double wheels; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 9.728 kg Carrying capacity: 39.772 kg GVW: 45.000 kg Registration number: 018502 Total length 1260 cm long Bed 840 cm Extendable 450 cm

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Kistler, Tilting welding turntable with mobile base -Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8 m/min at Ø 400 mm -Direction of rotation: clockwise/counterclockwise -Quantity: 1 piece available -Overall dimensions: 740/580/H630 mm -Weight: 145 kg Blsdeh D Il Tjpfx Amieh

Condition: good (used), Matrices, 100 mm x 2 Bedpfx Amozaitroijlh Offset punches x 2 In good condition