Used Amada Punching And Bending Machine for sale (69,218)

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Nodju H Ibnopfx Adtocr Excellent condition Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Ncsdpfx Aoxf Utaodtor Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Technical data: Tonnage: 1250 kN Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Ncsdpjy D H H Ejfx Adtjr Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos Nodpfjy Awzkex Adtscr With 1 piece square pin HS-Code: 8462 5900

Condition: good (used), functionality: fully functional, Plate Rolling Machine XZPP 100/16 Shaft diameter: 100 mm Roll diameter: 450 mm Max. strength of rolled material: 392 MPa Rolling speed: 0-6 m/min Total machine power: 11 kW Machine dimensions (L x W x H): 1570 x 1434 x 1578 mm Ncedpjy D A Nvofx Adtjr Machine weight: 3950 kg

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Nodoyi Hpcopfx Adtscr Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Ncedpfxeykt N Ss Adtor Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 6 mm, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x3000 Rota-Index Quick-change tool system TRUMPF Station 1: Rotating with indexing option for Boschert Multitool Max. punching diameter 105 mm, infinitely rotatable tool Station 2: Max. punching diameter 105 mm, with option for Boschert Multitool Revotool adapter incl. 8-position tool holder Punching force: 280 kN (28 tons) Travel range: x-axis 2050 mm (repositioning up to 9999 mm) y-axis 1580 mm Throat depth: 1750 mm Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool Labod 32060 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm, infinitely programmable upwards and downwards Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Overall width: 4900 mm Overall depth: 4800 mm Overall height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017 / Light Grey RAL7035 Year of manufacture: 2006 Ball transfer table Slug extraction system Njdpfx Ajx Tp Rfsdtscr Fast hydraulic system Very well maintained condition Comes with accessories

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Ncodpfx Adewfymnetsr Used machine in very good condition Refurbished Built in 2000

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Nedpfxoyxc Smj Adtocr Serial number: 350114786/01 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions Ncodpfx Adog In Azeter - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Nedsx Anpvopfx Adtjcr Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine Nedpov Tpxqofx Adtjcr -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, Year of construction: 1985, operating hours: 35,288 h, machine/vehicle number: 10661, total height: 2,200 mm, total width: 1,200 mm, total length: 1,700 mm, pressing force: 25 t, DGUV certified until: 06/2026, year of last overhaul: 2025, For sale is a MABU 25 VP /RC, which, given its age, is in good condition. The machine is still in use in serial production and operates reliably. An inspection and test run are possible in ongoing production until the end of week 18/2026. This gives you the opportunity to personally verify the machine’s performance and functionality. Ncodpfoyu S Etex Adtjr Nominal force: 250 kN Stroke rate: 12⅓–500 spm Feed: MABU 120/150 Adjustable stroke: 7–62 mm Main drive: 3.7 kW Power supply: – Adjustable stroke: 7–62 mm Table dimensions: 400 x 360 mm Adjustable strip entry height: 10–140 mm Max. strip width: 35 mm Max. material thickness: 1.5 mm Machine dimensions: 2115 x 1662 x 1190 mm Weight: 2500 kg "Main drive on (runtime) (Control cabinet counter)" 35,288 h A sound enclosure is optionally available for purchase.

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides Ncedpjyn R Ugsfx Adtsr

Condition: good (used), Year of construction: 1990, functionality: fully functional, punching force: 22 t, sheet thickness steel (max.): 6 mm, Murata Weidemann C 2000 Nodpfx Adjtulrfotocr

Condition: used, Year of construction: 1981, 2" mm dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm weight of the machine ca. 250 kg Equipment/Accessories: - Foot switch Nedpsy Aa Imofx Adtecr - Mobile stand Includes a wide range of bending tools See images

Condition: used, 3-roll plate bending machine Manufacturer: Luna Model: 8266 20/25 Machine No.: 2202 Working range: 2000 x 2.5 mm sheet thickness Swing-out top roll Nsdpfxsyw S N So Adtscr Power supply: 3-phase, 16 amps

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic - Digital display for the left roller movement Nodpju Evqhefx Adtocr - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system - Overload protection - Documentation - 400V

Condition: new, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control - Emergency stop Njdpfxjr Ar Hvj Adtecr - Documentation - 400 V

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation Ncsdpfx Asucqqusdter - 400 V

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts Ncedpfxjyu S D Aj Adtjr - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t Ncsdpeuihvzefx Adtjr incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Ncsdpfx Adoyyvgtetor

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE AXIS: 3 MAX TUBE DIAMETER: 30X2 mm WORKING LENGHT: 3000 mm X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800 Nodpfjvhc Uusx Adtjcr