Used Antique Machine Folding Machine for sale (67,000)

Condition: used, functionality: fully functional, machine/vehicle number: 30841202, infeed width: 480 mm, MBO "Z2" Mobiles Folding Unit, Knife Folding Unit Usable for MBO folding machines as well as other brands. Swivelable 180 degrees, thus folding with the knife is possible from above and below. Maximum feed width 48 cm, up to 150 cycles/min. Bwedpfowptycox Aihep

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers Bwodpjxaa A Njfx Aihsp * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Bwsdpjxn Dhlefx Aihjp Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: used, functionality: unexamined, Year of construction: 2015, machine/vehicle number: 6233, Technical data: Maximum sheet thickness (sheet steel) 3mm Maximum sheet thickness (chrome steel) 2mm Maximum sheet thickness (aluminum) 4mm Maximum bending length 3200mm Maximum four-sided bending part height 300mm Minimum base area of a finished bent part 185mmx210mm Upper beam stroke 650mm Maximum bending beam travel distance 150mm Positioning accuracy of PosLift stop system 0.01mm Working height 1000mm Machine width with PosLift stop system in rectangular shape approx. 3000mm Machine width with PosLift stop system in J-shape approx. 4700mm Machine length approx. 6700mm Maximum machine height approx. 2600mm Net weight approx. 13000kg Air pressure 5.5 bar Total drive power 14kW Speeds: Bending beam 140°/s Upper beam 95mm/s Bjdpfjvxz Tqox Aihjwp

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm Bwodoy Em Dgjpfx Aihep - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Year of construction: 2008, Folding machine MBO K 800.2/4 S KTZ Year: 2008 Description: - 16 page folder - MBO Navigator Feeder - Round pile feeder: R 800 Folding unit MBO K 800.2/4 S KTZ - Parallel fold unit with 4 buckle plates - Second cross fold to the left / right - Noise hood over the entire folding section Excluding delivery Bwsdpsychztofx Aihep

Condition: good (used), machine/vehicle number: X02/22, Folding machine MBO T530-1-53/4 F, 4 folding pockets, counter, compressor, second folding unit with 4 pockets, 1 knife, machine number X02/22, in good condition, immediately available. WITHOUT DELIVERY. If interested, we will gladly provide information on additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Bedpfx Ajxdhv Eoihswp

Condition: good (used), Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat pile feeder, counter, in good condition, immediately available. Bedpehb Ep Iofx Aihowp If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility after prior arrangement.

Condition: good (used), Year of construction: 2015, Folding machine Horizon MT/PF-40L, serial number 008002, two folding pockets, pre-programmed jobs, electrically operated pockets, in good condition, immediately available. Technical data: Maximum format: 320x630 mm Minimum format: 125x128 mm Bodpfxex S Etao Aihswp Paper weight: 40–160 g/m² Speed: 23,000 cycles/h 2 parallel cassettes 230V power supply Electrically controlled delivery unit Counter with batch function Infinitely variable speed and feed adjustment High pile feeder Soundproof enclosures on all units and cassettes Documentation

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal Bedpfsy D Rxrjx Aihewp - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: used, Year of construction: 2007, Folding machine MBO Navigator T 800/442 Year: 2007 Description: - 16 page folder Feeder - Round pile feeder - Dualfeed - Pump Buckle folding unit: 1 MBO T800.1-1-78/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 78 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 2 MBO T800.1-2-68/4 - Second buckle folding section with 4 buckle plates Bjdoxd Dmyopfx Aihowp - Maximum infeed width: 68 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 3 MBO T800.1-3-56/2 - Third buckle folding section with 2 buckle plates - Maximum infeed width: 52 cm - Noise hoods for upper folding buckles Delivery MBO SBAP-46-ME - Horizontal stack delivery with pressing and marking device

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Folding unit MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold Bwodjxg Nlmopfx Aihep - Buckle fold underneath first cross fold - Second cross fold to the left Excluding delivery Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 15,542 h, machine/vehicle number: 37/7, control type: CNC control, controller model: RAS System 6000, working width: 3,200 mm, sheet thickness (max.): 2 mm, TECHNICAL DETAILS Working width: 3,200 mm Max. sheet thickness: 2.0 mm Backgauge: 3,050 mm Control: CNC Control type: RAS System 6000 Motor power: 3.3 kW MACHINE DETAILS Dimensions & Weight Overall length: 4,400 mm Overall width: 2,100 mm Overall height: 1,500 mm Bwjdpfewyv Rxsx Aihop Unladen weight: 3,500 kg Operating hours: 15,542 EQUIPMENT Documentation available CE marking available Transport packages: 3

Condition: used, Year of construction: 1989, functionality: fully functional, Used industrial Stahl T50/4-KB-F folding machine with a flat pile feeder, a 4-buckle parallel folding unit, and a cross-fold/knife unit. The machine is a complete Stahl folding system consisting of: Bwedezbu Rlepfx Aihop F 50A flat pile feeder T 50/4A 4-buckle parallel folding unit KB 52.2 cross-fold/knife unit This configuration allows for 4 parallel folds and 1 cross fold, making the machine suitable for brochures, leaflets, forms, signatures, printed sheets, and general post-press folding work. Main features: Industrial Stahl folding machine Flat pile feeder 4-buckle parallel folding unit Cross-fold/knife unit Suitable for B2 sheet format Robust mechanical construction Original Stahl system, Made in Western Germany Suitable for printing houses, bookbinding shops, and paper processing companies Technical data: Model: Stahl T50/4-KB-F Feeder: F 50A flat pile feeder Folding unit: T 50/4A, 4-buckle parallel folding unit Cross-fold unit: KB 52.2 Folding configuration: 4 buckles + 1 cross fold Maximum sheet size: 500 × 750 mm Minimum sheet size: 100 × 150 mm Folding speed: up to 180 m/min Approximate output: up to approximately 15,400 sheets/hour with 50 × 70 cm sheets Frequency: 50 Hz Voltage: 380–400 V Approximate dimensions: 3.80 × 1.25 × 1.60 m Approximate weight: 1,260 kg Year of manufacture: 1989 Made in Western Germany Condition: used, complete system, available for inspection Location: Budapest, Hungary

Condition: not inspected (used), functionality: unexamined, Folding machine T500/4 without second folding unit, without delivery unit Bwodsrqf Sxjpfx Aihop

Condition: new, sheet width 1050 mm plate thickness 1,5 mm distance between columns -- mm weight of the machine ca. 280 kg dimensions of the machine ca. 1300 x 750 x 1515 mm Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Bwedpfx Ajudc Izeihop Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm

Year of construction: 2021, condition: new, Motor-driven upper beam and bending beam Oversized chain transmission Electronically adjustable top beam strength Bwjdpfjhzr Swex Aihjp Prepared for mounting a back gauge Foot pedal control with emergency stop Self-lubricating bearings and guides Adjustable scale reading for the correct bend angle. Drive motor 0.75 kW Dimensions 3750x650x1100 mm Weight 1540 kg Plate width 3020 mm Plate thickness 1.0 mm

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 124 mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1.010 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle Bodpfx Aiexaaanshewp - Workpiece clamping by means of a large lever

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale Bwodpfsxaamhjx Aihjp - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm

Condition: new, sheet width 1020 mm plate thickness 2,0 mm daylight opening 48 mm bending angle max. 0 - 135 ° work height max. 900 mm total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge Bodpfx Aijxaaufehowp - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: new, sheet width 1050 mm plate thickness 1.0 mm daylight opening 95.0 mm angle adjustable from - to 0 - 150 Grad total power requirement manuell weight of the machine ca. 180 kg range L-W-H 1320 x 790 x 1050 mm characteristics - Universally applicable bending machines for plumbing and repair shops Bwsdpfx Aioxcuxwjhsp - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Condition: new, sheet width 2065 mm plate thickness 1,20 mm daylight opening mit WZ 35,0 mm daylight opening ohne WZ 60,0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 520 kg. dimensions of the machine ca. 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp Bedpexabvwsfx Aihewp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW Bedpfx Aijxaaahohewp weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, sheet width 2540 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand Bwodpfx Aoxaaz Ssihop - Segmented upper cheek

Condition: new, sheet width 1020 mm Bodpfxsxaaxks Aihswp plate thickness 2,5 mm daylight opening 48 mm bending angle max. 0 - 135 ° total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm